520 Parts???

Post Reply
Dang
New Member
Posts: 7
Joined: Thu. Sep. 26, 2013 8:38 pm
Stove/Furnace Make: Efm
Stove/Furnace Model: 520
Location: In the coal region

Post Fri. Sep. 27, 2013 10:44 am

Grandmothers house has a efm 520 and years ago was converted to oil. I have the pot,gearbox assembly,worm some couplings from pot to worm Assembly. And a piece of steel with a large hole in middle which I believe is an ash diverter.. I'm not sure what these components are worth, they were in service for ten years then removed.. The blower and gear box are quiet when plugged in. I could post pic if needed.. Thanks for the advice.. And have to add what a great site this is if u can't get an answere here it don't exists..

User avatar
Rob R.
Site Moderator
Posts: 11505
Joined: Fri. Dec. 28, 2007 4:26 pm
Stoker Coal Boiler: EFM DF520
Hand Fed Coal Stove: Hitzer 50-93
Coal Size/Type: Lehigh Rice
Other Heating: Dad's 1953 EFM Highboy
Location: Chazy, NY

Post Fri. Sep. 27, 2013 11:16 am

Pictures would be great. Where are the parts located?

Visit Alternate Heating Sytems

Dang
New Member
Posts: 7
Joined: Thu. Sep. 26, 2013 8:38 pm
Stove/Furnace Make: Efm
Stove/Furnace Model: 520
Location: In the coal region

Post Fri. Sep. 27, 2013 12:05 pm

Parts are located in orwigsburg pa

Post Reply

Return to “Stoker Coal Boilers Using Anthracite (Hydronic & Steam)”