Stoker Coal Boilers automatically feed the coal and have controls and pumps just like any conventions boiler. They are intended to be used as a primary heat and often have domestic hot water coils as an added bonus. They can be set up independently or in dual sytem with your existing oil/gas boiler. They can accommodate both hot water base board or steam plumbing.
Post Reply
Posts: 118
Joined: Tue. Jul. 03, 2012 10:00 pm
Stoker Coal Boiler: efm stoker and allen stoker
Coal Size/Type: rice and buck
Other Heating: allen stoker
Stove/Furnace Make: EFM
Stove/Furnace Model: 520

Post Thu. Oct. 11, 2012 10:37 pm

does anyone know how adjust air setting on a loush stoker and pics please ;)
Ryan Strohl

User avatar
Posts: 97
Joined: Tue. Jan. 10, 2012 5:25 pm
Stove/Furnace Make: Harman/EFM/losch
Stove/Furnace Model: mark III/?350 round nose/ 475
Location: scranton

Post Fri. Oct. 12, 2012 5:39 am

there should be a adjustment lever just before the air pipe on the stoker unit goes in to the base.
learning from your mistakes it what makes us wise. "wise enough not to do that again"

Visit Alternate Heating Sytems

User avatar
Posts: 163
Joined: Mon. Feb. 04, 2008 12:47 pm
Hand Fed Coal Stove: (New) Warm Morning 400A
Other Heating: Yukon Polar-Eagle II Multi Furnace
Stove/Furnace Make: Losch 350 130k BTU's
Stove/Furnace Model: DS Stoves 1500WH Short Lid
Location: Greencastle, PA.

Post Sun. Oct. 28, 2012 12:32 am

( Losch )The setting is wide open, the last ones built didn't have an adjustment.
But then they weren't built buy Losch.

Post Reply

Return to “Stoker Coal Boilers Using Anthracite (Hydronic and Steam)”