Keep an eye on that baro, you might have issues with flyash puffing out of it. How did the cost of the remote install compare to fixing the chimney in the house?Jkohanski wrote: ↑Sat. Nov. 07, 2020 11:16 pmyes, I have glycol in coal loop. To save money, I was going to pipe to oil boiler direct, but that would be 50 gallons of glycol, way to expensive, especially if I had an issue and lost it. I ran 2 rehaue pipes, so 1" pex in parrell for both return and supply, as I need 180,000 btu thus the ah260. so far so good, but I need to add a dump zone, non powered in the shed. will post more pics later. I must say this site has been the inspiration to keep me going and switch to coal.
Pictures of Your Boiler
- Rob R.
- Site Moderator
- Posts: 17980
- Joined: Fri. Dec. 28, 2007 4:26 pm
- Location: Chazy, NY
- Stoker Coal Boiler: EFM 520
- Hand Fed Coal Stove: Chubby Jr
-
- Member
- Posts: 253
- Joined: Mon. Nov. 25, 2019 11:11 pm
- Location: ringoes, nj central west jersey near pA border
- Stoker Coal Boiler: ahs s260
- Coal Size/Type: pea
- Other Heating: fuel oil
- Contact:
Pad and shed about 1800.00 dollars. New chimney, estimate was over 8000.00. Also no basement entry, and the floors have termite damage. I don think they would have taken the weight to basement entry located in middle of house. I will keep I on ash. Ran through 1st night and loving it.
-
- Member
- Posts: 253
- Joined: Mon. Nov. 25, 2019 11:11 pm
- Location: ringoes, nj central west jersey near pA border
- Stoker Coal Boiler: ahs s260
- Coal Size/Type: pea
- Other Heating: fuel oil
- Contact:
Pad and shed about 1800.00 dollars. New chimney, estimate was over 8000.00. Also no basement entry, and the floors have termite damage. I don think they would have taken the weight to basement entry located in middle of house. I will keep I on ash. Ran through 1st night and loving it.
- Idlorah
- Member
- Posts: 520
- Joined: Wed. Nov. 18, 2020 6:31 pm
- Location: New Ringgold, PA
- Stoker Coal Boiler: Allen 700 stoker
- Hand Fed Coal Stove: Gibralter MCC
- Coal Size/Type: Buck in the Allen and anything goes in the MCC, Anthracite
- Other Heating: None, maybe some wood in the MCC in the shoulder season
Figured I'd join this topic after being on the forum for about a month and finally getting my stoker running properly after some help with guys on this forum. I'm new to coal the house I just moved into has an allen stoker boiler with single pipe steam hear and and a DHW. I will say I love the hot water from this boiler and the heat is great as well, loving this unit now that I have worked the all the bugs out. Heating approx 3500 sqft to 72* making 1 ash pan every other day burning direnzo buck coal.
- swyman
- Member
- Posts: 2355
- Joined: Mon. Apr. 13, 2015 9:50 pm
- Location: Blissfield, MI
- Stoker Coal Boiler: Axeman-Anderson 260M Leisure Line AA-220 Boiler (FOR SALE)
- Coal Size/Type: Lehigh Pea
Guess it's time, still have to paint the auger. I thought it would be easier to do while it's running! Here is my recently restored 1980 Axeman Anderson 260M
- StokerDon
- Site Moderator
- Posts: 7486
- Joined: Mon. Nov. 11, 2013 11:17 am
- Location: PA, Southern York County!
- Stoker Coal Boiler: Gentleman Janitor GJ-5, Van Wert VA-600, Axeman Anderson130 X3.
- Hand Fed Coal Furnace: Harman SF3500 reduced down to 3 grates connected to its own plenum
- Coal Size/Type: Rice, Chestnut and whatever will fit through the door on the Harman
- Other Heating: Noth'in but COAL! Well, Maybe a little tiny bit of wood
That is one Cool lookin' Copper Coal Cookin' Contraption you got there!
-Don
-Don
-
- Member
- Posts: 253
- Joined: Mon. Nov. 25, 2019 11:11 pm
- Location: ringoes, nj central west jersey near pA border
- Stoker Coal Boiler: ahs s260
- Coal Size/Type: pea
- Other Heating: fuel oil
- Contact:
Nice, I know my family loves coal heat.Idlorah wrote: ↑Sat. Dec. 12, 2020 10:00 pmFigured I'd join this topic after being on the forum for about a month and finally getting my stoker running properly after some help with guys on this forum. I'm new to coal the house I just moved into has an allen stoker boiler with single pipe steam hear and and a DHW. I will say I love the hot water from this boiler and the heat is great as well, loving this unit now that I have worked the all the bugs out. Heating approx 3500 sqft to 72* making 1 ash pan every other day burning direnzo buck coal.IMG_20201106_133239276.jpgIMG_20201106_133244545.jpgIMG_20201125_131922773.jpgIMG_20201125_131932988.jpgIMG_20201125_132215965.jpgIMG_20201206_161034421.jpgIMG_20201206_185043355.jpgIMG_20201210_121935278_HDR.jpg
-
- Member
- Posts: 2366
- Joined: Sun. Mar. 25, 2007 8:41 pm
- Location: Ithaca, New York
- Stoker Coal Boiler: Keystoker KAA-4-1 dual fuel boiler
- Hand Fed Coal Boiler: former switzer CWW100-sold
- Coal Size/Type: rice
- Other Heating: kerosene for dual fuel Keystoker/unused
==========================================================================================
I am glad your steam system is working well and
you have plenty of hot water too.
In the future you may want to install a drop header coming off
the top tapping(s) to eliminate wet steam from rising into the
header pipe.
Your home will heat faster and the air in the radiators
will be purged from the radiators much faster and the
radiators will hold thier heat longer.
You can always install TRV's on each radiator to avoid
wasting heat in rooms that are unoccupied.
You may want to invest in a couple of well written books
on steam heat written by Dan Holohan;
The first one is "WE GOT STEAM" and the second one is
"GREENING STEAM".
You can purchase them directly from the author through
his web site www.heating help.com via the book store page
on the heating help forum.
Mr. Holohan ships the paperback books directly to you from his office
and all profits go to the author.
- Idlorah
- Member
- Posts: 520
- Joined: Wed. Nov. 18, 2020 6:31 pm
- Location: New Ringgold, PA
- Stoker Coal Boiler: Allen 700 stoker
- Hand Fed Coal Stove: Gibralter MCC
- Coal Size/Type: Buck in the Allen and anything goes in the MCC, Anthracite
- Other Heating: None, maybe some wood in the MCC in the shoulder season
lzaharis wrote: ↑Thu. Mar. 18, 2021 12:25 am==========================================================================================
I am glad your steam system is working well and
you have plenty of hot water too.
In the future you may want to install a drop header coming off
the top tapping(s) to eliminate wet steam from rising into the
header pipe.
Your home will heat faster and the air in the radiators
will be purged from the radiators much faster and the
radiators will hold thier heat longer.
You can always install TRV's on each radiator to avoid
wasting heat in rooms that are unoccupied.
You may want to invest in a couple of well written books
on steam heat written by Dan Holohan;
The first one is "WE GOT STEAM" and the second one is
"GREENING STEAM".
You can purchase them directly from the author through
his web site www.heating help.com via the book store page
on the heating help forum.
Mr. Holohan ships the paperback books directly to you from his office
and all profits go to the author.
I assume this was meant for me? what exactly is a drop header?
-
- Member
- Posts: 2366
- Joined: Sun. Mar. 25, 2007 8:41 pm
- Location: Ithaca, New York
- Stoker Coal Boiler: Keystoker KAA-4-1 dual fuel boiler
- Hand Fed Coal Boiler: former switzer CWW100-sold
- Coal Size/Type: rice
- Other Heating: kerosene for dual fuel Keystoker/unused
Yes it was,
The drop header allows only dry steam to enter your header pipe and allows the condensate to drain back to the water line of the boiler.
You can type in drop header in the search box here and you will see pictures of them or you can google them and look at hundreds of them in steam boiler installations.
The drop header allows only dry steam to enter your header pipe and allows the condensate to drain back to the water line of the boiler.
You can type in drop header in the search box here and you will see pictures of them or you can google them and look at hundreds of them in steam boiler installations.
- coaledsweat
- Site Moderator
- Posts: 13763
- Joined: Fri. Oct. 27, 2006 2:05 pm
- Location: Guilford, Connecticut
- Stoker Coal Boiler: Axeman Anderson 260M
- Coal Size/Type: Pea
Hartford loop too?
- Rob R.
- Site Moderator
- Posts: 17980
- Joined: Fri. Dec. 28, 2007 4:26 pm
- Location: Chazy, NY
- Stoker Coal Boiler: EFM 520
- Hand Fed Coal Stove: Chubby Jr
If the system runs well as is I am not sure why you would want to rework the piping. Unlike modern boilers that rely heavily on the near-boiler piping for dry steam, that Allen boiler has a large steam chest to do the job.lzaharis wrote: ↑Fri. Mar. 19, 2021 12:04 amYes it was,
The drop header allows only dry steam to enter your header pipe and allows the condensate to drain back to the water line of the boiler.
You can type in drop header in the search box here and you will see pictures of them or you can google them and look at hundreds of them in steam boiler installations.