Boiler Jackets

 
Pacowy
Member
Posts: 3555
Joined: Tue. Sep. 04, 2007 10:14 pm
Location: Dalton, MA
Stoker Coal Boiler: H.B. Smith 350 Mills boiler/EFM 85R stoker
Coal Size/Type: Buckwheat/anthracite

Post by Pacowy » Mon. Jan. 03, 2011 8:11 pm

After rereading this thread, my apologies to stokerscot. It apparently was AA130FIREMAN who was in stokerscot's coal dust.

Mike

 
User avatar
stoker-man
Verified Business Rep.
Posts: 2071
Joined: Mon. Nov. 19, 2007 9:33 pm
Location: Lehigh Valley, PA
Hand Fed Coal Boiler: 1981 efm wcb-24 in use 365 days a year
Coal Size/Type: Anthracite/Chestnut
Other Heating: Hearthstone wood stove

Post by stoker-man » Mon. Jan. 03, 2011 8:13 pm

Must be slow on the forum. This thread got attacked like a great white on blood.

The jacket keeps more heat inside the boiler so it can be directed to the living spaces of the house. If some heat loss in the basement helps keep it more comfortable and the floor above it, then skip the jacket. If the heat in the basement is being wasted, then install the jacket.

 
User avatar
whistlenut
Member
Posts: 3548
Joined: Sat. Mar. 17, 2007 6:29 pm
Location: Central NH, Concord area
Stoker Coal Boiler: AA130's,260's, AHS130&260's,EFM900,GJ & V-Wert
Hand Fed Coal Boiler: Franks,Itasca 415,Jensen, NYer 130,Van Wert
Hot Air Coal Stoker Furnace: Alaska, EFM, Keystoker, Yellow Flame
Hot Air Coal Stoker Stove: Alaska, Keystoker-2,Leisure Line
Hand Fed Coal Stove: Alaska, Gibraltar, Keystone,Vc Vigilant 2
Hand Fed Coal Furnace: Ford, Jensen, NYer, Van Wert,
Baseburners & Antiques: Glenwoods
Coal Size/Type: Barley, Buck, Rice ,Nut, Stove
Other Heating: Oil HWBB

Post by whistlenut » Mon. Jan. 03, 2011 8:17 pm

It's a new year, let the games begin!! Malta is right in the decent path for Boston and Manchester airports, so we all see the 'Heat Plume' rising from an unnamed forum member. His pool radiates heat all summer, too. Was that a rail spur I saw being constructed in October?
Back to the jacket thing....I never run 180 either, 170 max; 140-165 and never a problem. It might circulate a bit longer, but what's the difference. If baseboard radiates 700 BTU's per foot at 180, it will probably do 600 at 160. Big deal with a solid fuel source. Makes for an extremely quiet system with very little radical temp changes in the piping. :idea:

All in good fun, Chris................

 
User avatar
AA130FIREMAN
Member
Posts: 1954
Joined: Sat. Feb. 28, 2009 4:13 pm

Post by AA130FIREMAN » Mon. Jan. 03, 2011 8:18 pm

Pacowy wrote:After rereading this thread, my apologies to stokerscot. It apparently was AA130FIREMAN who was in stokerscot's coal dust.

Mike
Guess I have my music artist mixed up, ya know my favorite music pair is Dolly Parton :D


 
User avatar
whistlenut
Member
Posts: 3548
Joined: Sat. Mar. 17, 2007 6:29 pm
Location: Central NH, Concord area
Stoker Coal Boiler: AA130's,260's, AHS130&260's,EFM900,GJ & V-Wert
Hand Fed Coal Boiler: Franks,Itasca 415,Jensen, NYer 130,Van Wert
Hot Air Coal Stoker Furnace: Alaska, EFM, Keystoker, Yellow Flame
Hot Air Coal Stoker Stove: Alaska, Keystoker-2,Leisure Line
Hand Fed Coal Stove: Alaska, Gibraltar, Keystone,Vc Vigilant 2
Hand Fed Coal Furnace: Ford, Jensen, NYer, Van Wert,
Baseburners & Antiques: Glenwoods
Coal Size/Type: Barley, Buck, Rice ,Nut, Stove
Other Heating: Oil HWBB

Post by whistlenut » Mon. Jan. 03, 2011 8:22 pm

Do you live on a farm? If so, it must be a dairy farm, with your fascination for the 'milkers'. I can see a trip to DollyWood in you future; 'Wood' being the operative word. ;) :roll: :oops: :shock: :o

 
CoalBurner5
Member
Posts: 114
Joined: Mon. Nov. 08, 2010 9:20 pm

Post by CoalBurner5 » Mon. Jan. 03, 2011 8:40 pm

I put the boiler in this year. This is the first year with the large house. I'm sure i'm loosing some heat through block and two garage doors. In the near future i'm going to stud up the block area and cover it to an almost finished basement. Right now i'm running 6 teeth at 7 air and it's burning very well.

The house has 1/2 the house hot water radiators and half the house run through forced air being feed through a heat exchanger (which i'm sure not the most efficient).

The boiler is running high of 180 low of 160 and timer is about 2 mins every 30 mins. It runs perfect and the ashes are burned through.

I purchased coal from a very good source at 185.00 a ton delivered. I purchased 10 tons and i'm sure i'll need more for the winter. Next year I got a deal already set up for coal to be delivered via tri axle at 157.00 a ton (family friend runs the trucking business).

Let me know if anyone has any more thoughts.

 
User avatar
Rob R.
Site Moderator
Posts: 18004
Joined: Fri. Dec. 28, 2007 4:26 pm
Location: Chazy, NY
Stoker Coal Boiler: EFM 520
Hand Fed Coal Stove: Chubby Jr

Post by Rob R. » Mon. Jan. 03, 2011 9:14 pm

Sounds like you have the 520 "tuned". Jackets might help a little, but don't expect miracles.

5500 sq.feet is a big shack, and you know the old saying... a big horse eats a lot of hay.

 
User avatar
AA130FIREMAN
Member
Posts: 1954
Joined: Sat. Feb. 28, 2009 4:13 pm

Post by AA130FIREMAN » Mon. Jan. 03, 2011 10:46 pm

stoker-man wrote:Must be slow on the forum. This thread got attacked like a great white on blood.
We just need some fresh meat to sink our teeth into !!! :taz: :wine: toothy


 
ben
Member
Posts: 178
Joined: Thu. Aug. 06, 2009 9:06 pm
Location: n central PA
Stoker Coal Boiler: EFM 350 with an S-20 pot (1966)
Coal Size/Type: Rice

Post by ben » Mon. Jan. 03, 2011 11:03 pm

We have friends who heat a 6 bedroom mansion with 12 foot ceilings 4700 square feet with an efm 900. Running 3 circulators. They chose not to install the jacket and they have a little more heat in the basement which keeps the hardwood floors warmer. They keep their heat set at 70. This unit works perfect for them never an issue. They burn this unit all summer. They supply domestic hot water to the carriage house which has a small efficiency apartment. They bought this unit used and refurbished. They also burn buckweat less than 11 ton per year. They switched from natural gas 4 years ago and can't be happier. EFM is a great unit. I have a 350 in a traditional cape cod and only burn about 5 ton. I have jackets on my
EFM but I do not have insulation surrounding the boiler.

 
User avatar
Sting
Member
Posts: 2983
Joined: Mon. Feb. 25, 2008 4:24 pm
Location: Lower Fox Valley = Wisconsin
Other Heating: OBSO Lennox Pulse "Air Scorcher" burning NG

Post by Sting » Mon. Jan. 03, 2011 11:31 pm

AA130FIREMAN wrote:
stoker-man wrote:Must be slow on the forum. This thread got attacked like a great white on blood.
We just need some fresh meat to sink our teeth into !!! :taz: :wine: toothy
I didn't have a chance

Image

 
User avatar
AA130FIREMAN
Member
Posts: 1954
Joined: Sat. Feb. 28, 2009 4:13 pm

Post by AA130FIREMAN » Tue. Jan. 04, 2011 7:32 am

Sting wrote:
AA130FIREMAN wrote: We just need some fresh meat to sink our teeth into !!! :taz: :wine: toothy
I didn't have a chance

Image
Don't fear, there will be more. The early shark gets the fish. :pepsi:

 
ryan20strohl
Member
Posts: 145
Joined: Tue. Jul. 03, 2012 10:00 pm
Stoker Coal Boiler: efm coal boiler
Coal Size/Type: rice
Other Heating: Bryant evolution heat pump

Post by ryan20strohl » Sat. Jul. 07, 2012 6:06 pm

i rapped my boiler, just the tank in a hot water heater blanket no covers, it works great

Post Reply

Return to “Stoker Coal Boilers Using Anthracite (Hydronic & Steam)”