EFM 350
- CoalHeat
- Member
- Posts: 8862
- Joined: Sat. Feb. 10, 2007 9:48 pm
- Location: Stillwater, New Jersey
- Stoker Coal Boiler: 1959 EFM 350
- Hand Fed Coal Stove: Harman Magnafire Mark I
- Baseburners & Antiques: Sears Signal Oak 15 & Andes Kitchen Range
- Coal Size/Type: Rice and Chestnut
- Other Heating: Fisher Fireplace Insert
I thought a Bitch Bar was either a "Wiggly Joint" or the sissy bar on a motorcycle.
John, The "shale bar" works great for alot of projects, as you discovered. Wow, you sure have alot of clearance around and over the 350 huh? The shale Bar also makes a great Shoe-Horn for large, heavy objects like that 350.
-
- Member
- Posts: 6515
- Joined: Sun. Feb. 10, 2008 3:48 pm
- Location: Cape Cod, MA
- Stoker Coal Boiler: want AA130
- Hand Fed Coal Stove: DS Machine BS#4, Harman MKII, Hitzer 503,...
- Coal Size/Type: Pea/Nut/Stove
Johnson bar is better for shoe horning...
http://kk.org/cooltools/archives/001295
http://kk.org/cooltools/archives/001295
- CoalHeat
- Member
- Posts: 8862
- Joined: Sat. Feb. 10, 2007 9:48 pm
- Location: Stillwater, New Jersey
- Stoker Coal Boiler: 1959 EFM 350
- Hand Fed Coal Stove: Harman Magnafire Mark I
- Baseburners & Antiques: Sears Signal Oak 15 & Andes Kitchen Range
- Coal Size/Type: Rice and Chestnut
- Other Heating: Fisher Fireplace Insert
Making progress v-e-r-y s-l-o-w-l-y.
- CoalHeat
- Member
- Posts: 8862
- Joined: Sat. Feb. 10, 2007 9:48 pm
- Location: Stillwater, New Jersey
- Stoker Coal Boiler: 1959 EFM 350
- Hand Fed Coal Stove: Harman Magnafire Mark I
- Baseburners & Antiques: Sears Signal Oak 15 & Andes Kitchen Range
- Coal Size/Type: Rice and Chestnut
- Other Heating: Fisher Fireplace Insert
v--e--r--y s--l--o--w--l--y
- CoalHeat
- Member
- Posts: 8862
- Joined: Sat. Feb. 10, 2007 9:48 pm
- Location: Stillwater, New Jersey
- Stoker Coal Boiler: 1959 EFM 350
- Hand Fed Coal Stove: Harman Magnafire Mark I
- Baseburners & Antiques: Sears Signal Oak 15 & Andes Kitchen Range
- Coal Size/Type: Rice and Chestnut
- Other Heating: Fisher Fireplace Insert
Soon. I was going to work on it today, but other tasks have gotten in the way...again.
- CoalHeat
- Member
- Posts: 8862
- Joined: Sat. Feb. 10, 2007 9:48 pm
- Location: Stillwater, New Jersey
- Stoker Coal Boiler: 1959 EFM 350
- Hand Fed Coal Stove: Harman Magnafire Mark I
- Baseburners & Antiques: Sears Signal Oak 15 & Andes Kitchen Range
- Coal Size/Type: Rice and Chestnut
- Other Heating: Fisher Fireplace Insert
Today I installed the heat exchanger in the plenum above the oil furnace, I'll be using the blower in the furnace to distribute the hot air. This job was by far the biggest pain in the ass, I removed the plenum where the heat exchanger is now located, mounted the exchanger on top of the furnace and rebuilt the sheet metal around it. The furnace is on cinder blocks (EFM is as well) I removed the blocks and lowered the furnace so I could get the duct work apart, I sure love wrestling with those old ducts, much heavier then the ones used today. Didn't come out too bad considering my hack sheet metal work.
Now that this part is done I can start on the plumbing which I actually enjoy doing.
Now that this part is done I can start on the plumbing which I actually enjoy doing.
- sterling40man
- Member
- Posts: 1645
- Joined: Sat. May. 03, 2008 11:52 am
- Location: Northern Maine
- Stoker Coal Boiler: Keystoker K6
Cool.
Attachments
- CoalHeat
- Member
- Posts: 8862
- Joined: Sat. Feb. 10, 2007 9:48 pm
- Location: Stillwater, New Jersey
- Stoker Coal Boiler: 1959 EFM 350
- Hand Fed Coal Stove: Harman Magnafire Mark I
- Baseburners & Antiques: Sears Signal Oak 15 & Andes Kitchen Range
- Coal Size/Type: Rice and Chestnut
- Other Heating: Fisher Fireplace Insert
Thanks, guys. Chris, I just removed and modified the existing ductwork on the outlet side of the oil furnace. The actual duct was made by a professional! The furnace was installed in November, 2007 after the "big flood". My homeowner's policy paid for all of it except the $500 deductable. I was just starting on my second season burning coal. If I knew then what I know now I would have installed a stoker furnace. I do remember thinking "I should install a coal furnace here".
As far as servicing the EFM, it's very tight. I can't remove the whole stoker assembly, pot and all. I have to separate the pot and take it out through the ash door, then I can pull the stoker mechanism off.- VigIIPeaBurner
- Member
- Posts: 2579
- Joined: Fri. Jan. 11, 2008 10:49 am
- Location: Pequest River Valley, Warren Co NJ
- Hot Air Coal Stoker Furnace: Keystoker Koker(down)
- Hand Fed Coal Stove: Vermont Casting Vigilant II 2310
- Other Heating: #2 Oil Furnace
A plan is in place!Wood'nCoal wrote:As far as servicing the EFM, it's very tight. I can't remove the whole stoker assembly, pot and all. I have to separate the pot and take it out through the ash door, then I can pull the stoker mechanism off.
Lookin good and making forward progress!
- CoalHeat
- Member
- Posts: 8862
- Joined: Sat. Feb. 10, 2007 9:48 pm
- Location: Stillwater, New Jersey
- Stoker Coal Boiler: 1959 EFM 350
- Hand Fed Coal Stove: Harman Magnafire Mark I
- Baseburners & Antiques: Sears Signal Oak 15 & Andes Kitchen Range
- Coal Size/Type: Rice and Chestnut
- Other Heating: Fisher Fireplace Insert
I'll get this thing installed if it takes until next spring!!!!!!
- coal berner
- Member
- Posts: 3600
- Joined: Tue. Jan. 09, 2007 12:44 am
- Location: Pottsville PA. Schuylkill County PA. The Hart Of Anthracite Coal Country.
- Stoker Coal Boiler: 1986 Electric Furnace Man 520 DF
Not funny the way your moving on it It will be next year until it is hooked up and making heatWood'nCoal wrote:I'll get this thing installed if it takes until next spring!!!!!!