Burner Plate Help Needed

Post Reply
 
TzHauling
Member
Posts: 28
Joined: Mon. Dec. 01, 2008 8:30 pm
Location: P.A.

Post by TzHauling » Tue. Jun. 30, 2009 1:29 am

I need some help. I need to find where I can buy burner plates. I noticed the other day Mine are cracked and some pieces are missing. I have a efm boiler. I found some numbers on the plates. G809 R Any help would be great. Thanks

 
User avatar
stoker-man
Verified Business Rep.
Posts: 2071
Joined: Mon. Nov. 19, 2007 9:33 pm
Location: Lehigh Valley, PA
Hand Fed Coal Boiler: 1981 efm wcb-24 in use 365 days a year
Coal Size/Type: Anthracite/Chestnut
Other Heating: Hearthstone wood stove

Post by stoker-man » Tue. Jun. 30, 2009 6:10 am

EFM Dealers Who Sell Direct

You can buy them from any dealer. Use the above link if you like.

 
TzHauling
Member
Posts: 28
Joined: Mon. Dec. 01, 2008 8:30 pm
Location: P.A.

Post by TzHauling » Tue. Jun. 30, 2009 11:22 pm

Thanks I'll give them a call.

 
User avatar
stoker-man
Verified Business Rep.
Posts: 2071
Joined: Mon. Nov. 19, 2007 9:33 pm
Location: Lehigh Valley, PA
Hand Fed Coal Boiler: 1981 efm wcb-24 in use 365 days a year
Coal Size/Type: Anthracite/Chestnut
Other Heating: Hearthstone wood stove

Post by stoker-man » Wed. Jul. 01, 2009 6:17 am

You can also arrange to pay any dealer and we can ship direct to your house.


 
TzHauling
Member
Posts: 28
Joined: Mon. Dec. 01, 2008 8:30 pm
Location: P.A.

Post by TzHauling » Wed. Jul. 15, 2009 7:04 pm

Well if I can arrange them to be shipped to my house that would be great. I work long hours during the day and don't have a lot of time to run around. It seams like everything is closed by the time I get home.

I'm not sure but I would like to replace all of these as you can see in the pictures one is broke so I figure I'll change them all now and be good for the winter.
100_3139.jpg
.JPG | 196.1KB | 100_3139.jpg
The numbers on it are G 809 R and there numbered in order 1,2,3,1,2,3.

There's only one screw on them to hold them in place. I don't know if there is a nut on the bottom or not.

If you want send me a price on the plates and the screws and shipping to Mertztown P.A. And let me know how to pay for them.

Thanks
Tim
[email protected]

 
User avatar
stoker-man
Verified Business Rep.
Posts: 2071
Joined: Mon. Nov. 19, 2007 9:33 pm
Location: Lehigh Valley, PA
Hand Fed Coal Boiler: 1981 efm wcb-24 in use 365 days a year
Coal Size/Type: Anthracite/Chestnut
Other Heating: Hearthstone wood stove

Post by stoker-man » Wed. Jul. 15, 2009 8:38 pm

R.D. Fuel & Heating New Tripoli, PA (610) 435-3520

Call them and they'll have us ship them to you.

Shipping might be $10 or a little more,,,,cheaper to pick them up, but if you can't.......

I see the one next to it looks like it's cracked.

You should order a set of 6 burner plates with screws and nuts and the 3 rope gaskets. We know the numbers if RD fuel calls.

Your worm appears to be worn too.

 
TzHauling
Member
Posts: 28
Joined: Mon. Dec. 01, 2008 8:30 pm
Location: P.A.

Post by TzHauling » Wed. Jul. 22, 2009 7:19 pm

Sorry I haven't been on in a while. To much overtime, but I'm not complaining about it. I need it. I'll call them tomm. on my lunch break.

I'm going to order 6 burner plates the nuts and bolts and the 3 rope gaskets.

The auger is worn but but it looks worst in the picture then what it is. I'm hoping to get another season or 2 out of it.

Thank you for your help.
Tim & Melinda

 
TzHauling
Member
Posts: 28
Joined: Mon. Dec. 01, 2008 8:30 pm
Location: P.A.

Post by TzHauling » Tue. Aug. 04, 2009 6:50 pm

OK I had chance to call and order the plates. Does anyone have manual on changing them? Pictures are worth a thousand words to me. I've never done this before. It looks like a simple task but with my luck it won't be.

Thanks for any help.


 
User avatar
stoker-man
Verified Business Rep.
Posts: 2071
Joined: Mon. Nov. 19, 2007 9:33 pm
Location: Lehigh Valley, PA
Hand Fed Coal Boiler: 1981 efm wcb-24 in use 365 days a year
Coal Size/Type: Anthracite/Chestnut
Other Heating: Hearthstone wood stove

Post by stoker-man » Wed. Aug. 05, 2009 6:05 am


 
TzHauling
Member
Posts: 28
Joined: Mon. Dec. 01, 2008 8:30 pm
Location: P.A.

Post by TzHauling » Sun. Aug. 16, 2009 11:42 am

Well it took awhile but I got it done. I probable did it the hard way, but it's done. I started it up and wow The air feed was way off. The new plates really make a different s.
100_3197.jpg
.JPG | 186.9KB | 100_3197.jpg
100_3198.jpg
.JPG | 246.4KB | 100_3198.jpg
100_3199.jpg
.JPG | 224.7KB | 100_3199.jpg


And this is what the burner plates looked.
100_3196.jpg
.JPG | 208.5KB | 100_3196.jpg
Thanks for your help
Tim

 
User avatar
stoker-man
Verified Business Rep.
Posts: 2071
Joined: Mon. Nov. 19, 2007 9:33 pm
Location: Lehigh Valley, PA
Hand Fed Coal Boiler: 1981 efm wcb-24 in use 365 days a year
Coal Size/Type: Anthracite/Chestnut
Other Heating: Hearthstone wood stove

Post by stoker-man » Sun. Aug. 16, 2009 10:08 pm

Looks good.

Post Reply

Return to “Stoker Coal Boilers Using Anthracite (Hydronic & Steam)”