Cogeneration
-
- Member
- Posts: 6515
- Joined: Sun. Feb. 10, 2008 3:48 pm
- Location: Cape Cod, MA
- Stoker Coal Boiler: want AA130
- Hand Fed Coal Stove: DS Machine BS#4, Harman MKII, Hitzer 503,...
- Coal Size/Type: Pea/Nut/Stove
Sell the electric back to the grid...
What about the lister as the power...
They run forever...
run it on veggie oil and you can be green...
What about the lister as the power...
They run forever...
run it on veggie oil and you can be green...
-
- Member
- Posts: 8601
- Joined: Sat. May. 24, 2008 4:26 pm
- Location: Chester, NY
- Hot Air Coal Stoker Stove: LL AnthraKing 180K, Pocono110K,KStokr 90K, DVC
- Hand Fed Coal Stove: Invader 2
- Baseburners & Antiques: Wings Best, Glenwood #8(x2) Herald 116x
- Coal Size/Type: Rice,
- Other Heating: Heating Oil CH, Toyotomi OM 22
Well David... they are around again. They are fabulously expensive and when they go wrong only three people on the planet know how to fix them.
Here is but one example from Yanmar.
https://higherlogicdownload.s3.amazonaws.com/APGA ... Yanmar.pdf
Here is but one example from Yanmar.
https://higherlogicdownload.s3.amazonaws.com/APGA ... Yanmar.pdf
Thats how the refrigerator in my grandmothers house in Philly worked....NG driven compressor right in the kitchen. They didn't have CO monitors back then, the row home was probably drafty enough it didn't matter.David... wrote: ↑Fri. Feb. 16, 2018 8:58 amSomeone made a heatpump with a compressor driven by a NG or propane engine. The engine maintenance was only once per year. Waste heat was recovered to help heat the house. The system cycled on demand for heat. This was not home made, but I don't think it was in production long.
David
These engines have a useful life of 8,000 - 12,000 hrs and this is not at maximum
output. They run at 3600RPM and their sweet spot in fuel economy is at about a
50% load so it puts out about 5 HP at that level . This info is the manufacturers
specs. They do make 1800RPM sets with a service life of 10,000 hrs but i believe
they are nat gas or propane. They usually produce about 50% heat energy and
~30% electrical , so you need a large heat demand year round to justify.
8760 hr per year and they have a 200hr maintenance schedule. Still can't find
fuel consumption at full output.
BigBarney
output. They run at 3600RPM and their sweet spot in fuel economy is at about a
50% load so it puts out about 5 HP at that level . This info is the manufacturers
specs. They do make 1800RPM sets with a service life of 10,000 hrs but i believe
they are nat gas or propane. They usually produce about 50% heat energy and
~30% electrical , so you need a large heat demand year round to justify.
8760 hr per year and they have a 200hr maintenance schedule. Still can't find
fuel consumption at full output.
BigBarney
-
- Member
- Posts: 8601
- Joined: Sat. May. 24, 2008 4:26 pm
- Location: Chester, NY
- Hot Air Coal Stoker Stove: LL AnthraKing 180K, Pocono110K,KStokr 90K, DVC
- Hand Fed Coal Stove: Invader 2
- Baseburners & Antiques: Wings Best, Glenwood #8(x2) Herald 116x
- Coal Size/Type: Rice,
- Other Heating: Heating Oil CH, Toyotomi OM 22
Emission is not an issue for standing generators although tier 4 is built in. 1800RPM makes a profound difference. However, wear is still an issue. Also for me 3600RPM is an irritating buzzy noise. Many people have run my Lister CS/6s for a million hours but they are noisy and smoky.
-
- Member
- Posts: 6446
- Joined: Mon. Apr. 16, 2007 9:34 pm
- Location: Central Maine
- Hand Fed Coal Stove: DS Machine 1300 with hopper
- Coal Size/Type: Blaschak Anthracite Nut
- Other Heating: Oil hot water radiators (fuel oil); propane
That's what my oil-fired boiler does now -- extracts heat from fuel oil and sends it to cast iron radiators, at (very roughly speaking) that 75% efficiency level.coalnewbie wrote: ↑Fri. Feb. 16, 2018 3:07 amThe bottom line is that you take HO/diesel whatever and extract 75% of the energy as electric and heat.
A unusually good diesel generator might run 40% to 45% efficient, and now you can add on complex and expensive components to get that remaining 30% waste heat into your house in usable form. Never mind that it will sound like some guy is just outside mowing your lawn 24/7 and stinking up the neighborhood with diesel fumes unless you add expensive emission controls (don't get 'em from VW ).
You mentioned a comparison to solar electricity. Let's see the math, including purchase and maintenance and installation costs over, say, ten years...
-
- Member
- Posts: 8601
- Joined: Sat. May. 24, 2008 4:26 pm
- Location: Chester, NY
- Hot Air Coal Stoker Stove: LL AnthraKing 180K, Pocono110K,KStokr 90K, DVC
- Hand Fed Coal Stove: Invader 2
- Baseburners & Antiques: Wings Best, Glenwood #8(x2) Herald 116x
- Coal Size/Type: Rice,
- Other Heating: Heating Oil CH, Toyotomi OM 22
Solar, hmm, let's see. $50,000 cost, money at 10% that is $5000 a year. Utility grid connection costs. $200+ a month. Then a 50% chance that your need to replace the roof in the 10 years. Uninstall the solar, reroof and then reassemble. A roof around here lasts about 20-25 years. It's strictly a no brainer and I have not got into any real costs. No solar person that I know has made any money. Even the most optimistic say 7-10 year pay back and most are behind their optimistic projections. RB, dream on.
It may more realistic to do nothing. Yep, that I can accept. It may be fun to have a better generator backup.
It may more realistic to do nothing. Yep, that I can accept. It may be fun to have a better generator backup.
-
- Member
- Posts: 6446
- Joined: Mon. Apr. 16, 2007 9:34 pm
- Location: Central Maine
- Hand Fed Coal Stove: DS Machine 1300 with hopper
- Coal Size/Type: Blaschak Anthracite Nut
- Other Heating: Oil hot water radiators (fuel oil); propane
7-10 year payback is very optimistic. There have been a few projects around here where people got together to finance large multi-household installations. The payback figures I saw were iffy. The latest shock which they didn't anticipate was towns assessing taxes on the installations -- made the numbers worse. But cost keeps coming down ...coalnewbie wrote: ↑Fri. Feb. 16, 2018 7:13 pmNo solar person that I know has made any money. Even the most optimistic say 7-10 year pay back and most are behind their optimistic projections.
Lots of battles around here on wind energy, too. I recently read that Texas, biggest oil producing state, is also the biggest electricity generator with wind turbines. Interesting.
-
- Site Moderator
- Posts: 11417
- Joined: Wed. Nov. 05, 2008 5:11 pm
- Location: Kent CT
- Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
- Baseburners & Antiques: Glenwood Modern Oak 114
- Coal Size/Type: nut and pea
I thought that was your old family motto. I think it best to follow that ancient wisdom.coalnewbie wrote: ↑Fri. Feb. 16, 2018 7:13 pmIt may more realistic to do nothing. Yep, that I can accept. It may be fun to have a better generator backup.
-
- Member
- Posts: 8601
- Joined: Sat. May. 24, 2008 4:26 pm
- Location: Chester, NY
- Hot Air Coal Stoker Stove: LL AnthraKing 180K, Pocono110K,KStokr 90K, DVC
- Hand Fed Coal Stove: Invader 2
- Baseburners & Antiques: Wings Best, Glenwood #8(x2) Herald 116x
- Coal Size/Type: Rice,
- Other Heating: Heating Oil CH, Toyotomi OM 22
How can one argue with the eternal wisdom of a moderator.
Oh well, 60* next week and winter boredom may be coming to an end. I suppose I could fix the lawn mowers instead.
Oh well, 60* next week and winter boredom may be coming to an end. I suppose I could fix the lawn mowers instead.
-
- Member
- Posts: 8601
- Joined: Sat. May. 24, 2008 4:26 pm
- Location: Chester, NY
- Hot Air Coal Stoker Stove: LL AnthraKing 180K, Pocono110K,KStokr 90K, DVC
- Hand Fed Coal Stove: Invader 2
- Baseburners & Antiques: Wings Best, Glenwood #8(x2) Herald 116x
- Coal Size/Type: Rice,
- Other Heating: Heating Oil CH, Toyotomi OM 22
Talked to Shawnee yesterday. Stuff ordered with 32 pole head. He agrees with my calculations. House will be on batteries 8PM to 6PM I never did listen.
Lister CS/6s will carry part of the load and offer redundancy with 32 pole heads.. 70* this week, time to get going before mowing season swamps me. Thank you for your input everyone. Self install MrCool DIY heat pumps on order. Thx Rob.
Give me the summer guys and I will share. First let's get these producing. 600RPM and last forever. Run on anything with a BTU... My favorite is used motor oil or soy oil from Miyugi.with a prefilter from hell.
Nil carborundum desperandum. Can anybody translate? Look at conventional wisdom and do something else - it always works.
Lister CS/6s will carry part of the load and offer redundancy with 32 pole heads.. 70* this week, time to get going before mowing season swamps me. Thank you for your input everyone. Self install MrCool DIY heat pumps on order. Thx Rob.
Give me the summer guys and I will share. First let's get these producing. 600RPM and last forever. Run on anything with a BTU... My favorite is used motor oil or soy oil from Miyugi.with a prefilter from hell.
Nil carborundum desperandum. Can anybody translate? Look at conventional wisdom and do something else - it always works.
Attachments
- coaledsweat
- Site Moderator
- Posts: 13767
- Joined: Fri. Oct. 27, 2006 2:05 pm
- Location: Guilford, Connecticut
- Stoker Coal Boiler: Axeman Anderson 260M
- Coal Size/Type: Pea
"Don't let the bastards wear you down."coalnewbie wrote: ↑Sat. Feb. 17, 2018 8:10 amNil carborundum desperandum. Can anybody translate? Look at conventional wisdom and do something else - it always works.