Zero Clearance Fireplace Insert

 
DENNIS BAUER
Member
Posts: 283
Joined: Tue. Jan. 13, 2015 8:49 am
Location: Springwater NY, (Western NY)
Hot Air Coal Stoker Stove: Keystoker 105 - SOLD
Hand Fed Coal Stove: Hitzer 30-95 - Garage
Hand Fed Coal Furnace: HITZER 50-93 - HOUSE
Coal Size/Type: NUT
Other Heating: PROPANE FURNACE, ELECTIC BASE BOARD, AND WOOD FIRE PLACE

Post by DENNIS BAUER » Tue. Feb. 23, 2016 7:29 am

Sorry for not getting any of the info last night. I'll do it tonight. Had a million and one things that came up last night, I'll get to it tonight.

 
edyrlund
New Member
Posts: 17
Joined: Tue. Feb. 12, 2008 7:08 pm
Location: Dover Ohio
Stoker Coal Boiler: EFM 520
Coal Size/Type: rice

Post by edyrlund » Wed. Feb. 24, 2016 4:07 pm

Like this? This was added to a zero clearance unit with the correct liner and cap. This was the initial fire before the trim pieces were installed

Attachments

insert.jpg
.JPG | 102.4KB | insert.jpg


 
DENNIS BAUER
Member
Posts: 283
Joined: Tue. Jan. 13, 2015 8:49 am
Location: Springwater NY, (Western NY)
Hot Air Coal Stoker Stove: Keystoker 105 - SOLD
Hand Fed Coal Stove: Hitzer 30-95 - Garage
Hand Fed Coal Furnace: HITZER 50-93 - HOUSE
Coal Size/Type: NUT
Other Heating: PROPANE FURNACE, ELECTIC BASE BOARD, AND WOOD FIRE PLACE

Post by DENNIS BAUER » Wed. Feb. 24, 2016 4:20 pm

edyrlund wrote:Like this? This was added to a zero clearance unit with the correct liner and cap. This was the initial fire before the trim pieces were installed
Yes I think, but was this installed inside of the zero clearance insert that was there already?

Post Reply

Return to “Wood, Pellets, Gas, Oil, Geothermal & Other Heating Types”