Aquastat Setting for Weil-Mclain Oil Boilers

Post Reply
 
User avatar
ShawnTRD
Member
Posts: 513
Joined: Tue. Feb. 04, 2014 1:04 am
Location: Spencer, NY
Stoker Coal Boiler: Keystoker KA6 (New in April 2014)
Coal Size/Type: Anthracite Rice
Other Heating: Weil Mclain WGO-2 (Net 75k BTU)

Post by ShawnTRD » Sun. Jan. 17, 2016 11:13 am

Turning on the oil boiler for the next week and a half. Looks like I want the dail set to 180-210. And from what I see you line up the number to the pointer. But the other part they call the high limit stop moves. Should I set that somewhere?

Attachments

2016-01-17 11.06.13.jpg
.JPG | 87.9KB | 2016-01-17 11.06.13.jpg
20160117_105935.jpg
.JPG | 114.1KB | 20160117_105935.jpg


 
User avatar
BlackBetty06
Member
Posts: 603
Joined: Tue. Jan. 01, 2013 10:44 am
Location: Lancaster county PA
Hand Fed Coal Stove: Hitzer 50-93
Coal Size/Type: Stockton Nut
Other Heating: Jotul 118b woodstove, dual fuel heat pump/condensing propane furnace

Post by BlackBetty06 » Tue. Jan. 26, 2016 5:38 pm

Set the water temp for 170- 180 and your high limit at 200. You will be good to go then

Post Reply

Return to “Wood, Pellets, Gas, Oil, Geothermal & Other Heating Types”