Who did you sell the one stove to? I seem to remember his grate broke last year. Is this the same model?KingCoal wrote: ↑Mon. Oct. 17, 2022 1:59 pmThe 120’s were the first ones. The 520’s are about the same, 120 pound capacity.
There are some pretty good threads here to study up on them.
ONLY buy any of these stoves if the bricks and grates are PERFECT. You can have a new barrel rolled but, no new bricks available and limited grates at premium prices
Also make sure the doors aren’t warped and the cast top isn’t cracked, top load door mountings aren’t broken off
Warm morning 120
-
- Member
- Posts: 3756
- Joined: Fri. Aug. 16, 2019 3:02 pm
- Location: Oneida, N.Y.
- Hand Fed Coal Stove: Harmon Mark II
- Hand Fed Coal Furnace: Looking
- Baseburners & Antiques: Looking
- Coal Size/Type: Nut
- Other Heating: newmac wood/coal combo furnace
-
- Member
- Posts: 52
- Joined: Sun. Jan. 31, 2021 11:57 pm
- Location: Indiana
- Hot Air Coal Stoker Furnace: Fire Power furnace
- Hand Fed Coal Furnace: Ward’s gravity furnace
- Baseburners & Antiques: Florence 53
- Coal Size/Type: Stoker
- Other Heating: Hard wood
Yes I picked it up yesterday. It’s in my shop now.
-
- Member
- Posts: 4837
- Joined: Wed. Apr. 03, 2013 1:24 pm
- Location: Elkhart county, IN.
- Hand Fed Coal Stove: 1 comforter stove works all iron coal box stove, seventies.
- Baseburners & Antiques: 2014 DTS C17 Base Burner, GW #6, GW 113 formerly Sir Williams, maybe others at Pauliewog’s I’ve forgotten about
- Coal Size/Type: Nut Anth.
- Other Heating: none
wtm?’s
Brother “fig” came and got my last 120 and the 520 as well. He already had T.O.M. the custom can and a half base heater conversion I built.
Brother “fig” came and got my last 120 and the 520 as well. He already had T.O.M. the custom can and a half base heater conversion I built.
-
- Member
- Posts: 3756
- Joined: Fri. Aug. 16, 2019 3:02 pm
- Location: Oneida, N.Y.
- Hand Fed Coal Stove: Harmon Mark II
- Hand Fed Coal Furnace: Looking
- Baseburners & Antiques: Looking
- Coal Size/Type: Nut
- Other Heating: newmac wood/coal combo furnace
- ASea
- Member
- Posts: 1156
- Joined: Thu. Nov. 27, 2014 8:55 pm
- Location: Athol Massachusetts
- Hot Air Coal Stoker Stove: Alaska Kast Console II
- Hand Fed Coal Stove: Coal Chubby
- Baseburners & Antiques: Glenwood Modern Oak 114, Glenwood 30 "Estate" Warm Morning 120
- Coal Size/Type: Sherman Anthracite Nut/Stove from C&T Coal
- Other Heating: Peerless Boiler with Cast Iron Baseboards
I have one of these in pristine condition. Mine says "Estate" I'm assuming it was made for Montgomery Ward or some other retailer. I grabbed it for short money a few years ago. I never hooked it up. It's in my basement.
-
- Member
- Posts: 3756
- Joined: Fri. Aug. 16, 2019 3:02 pm
- Location: Oneida, N.Y.
- Hand Fed Coal Stove: Harmon Mark II
- Hand Fed Coal Furnace: Looking
- Baseburners & Antiques: Looking
- Coal Size/Type: Nut
- Other Heating: newmac wood/coal combo furnace
Fig just posted somewhere, I saw it earlier today. I think he said model 520. Is it the same?
- ASea
- Member
- Posts: 1156
- Joined: Thu. Nov. 27, 2014 8:55 pm
- Location: Athol Massachusetts
- Hot Air Coal Stoker Stove: Alaska Kast Console II
- Hand Fed Coal Stove: Coal Chubby
- Baseburners & Antiques: Glenwood Modern Oak 114, Glenwood 30 "Estate" Warm Morning 120
- Coal Size/Type: Sherman Anthracite Nut/Stove from C&T Coal
- Other Heating: Peerless Boiler with Cast Iron Baseboards
Here's a link to my thread on this forum. It's a beautiful stove.waytomany?s wrote: ↑Wed. Nov. 23, 2022 4:51 pmFig just posted somewhere, I saw it earlier today. I think he said model 520. Is it the same?
Post by ASea - New to me Warm Morning/Estate Stove
-
- Member
- Posts: 52
- Joined: Sun. Jan. 31, 2021 11:57 pm
- Location: Indiana
- Hot Air Coal Stoker Furnace: Fire Power furnace
- Hand Fed Coal Furnace: Ward’s gravity furnace
- Baseburners & Antiques: Florence 53
- Coal Size/Type: Stoker
- Other Heating: Hard wood
I disassembled the 120 today. There’s several good parts there. Hanging on to them in case I’d ever need them but if they could benefit one of you guys then message me. I’ll give them to you or be interested in trade for Florence 53 parts.