Florence 151 build

Post Reply
 
Paned
Member
Posts: 177
Joined: Wed. Mar. 25, 2015 10:37 am
Location: Ohio
Baseburners & Antiques: Florence 153, 151; Imperial Acorn, Alert Acorn, Acme Carbon, Favorite 261, Favorite 416, Estate Square Oak

Post by Paned » Sun. Nov. 14, 2021 8:21 pm

Another project on deck for winter. Gonna start on another one of my Florence stoves. I reluctantly sold my cherry 151 to a great friend last winter. I knew it would go to a great home and get another member to the coal family. So now I need to replace it. I’ll post pics of progress this winter in no hurry. Sending out nickel work to Brain at Mill Lake. Brian does exceptional work.

Attachments

2DC3228F-45F0-4866-96B9-2E17F979F7FA.jpeg
.JPEG | 1.1MB | 2DC3228F-45F0-4866-96B9-2E17F979F7FA.jpeg
2F65CA8B-34BA-4EF3-B4D0-01D0C70DB6D1.jpeg
.JPEG | 1MB | 2F65CA8B-34BA-4EF3-B4D0-01D0C70DB6D1.jpeg

 
grumpy
Member
Posts: 12263
Joined: Sat. Jan. 02, 2010 12:28 am

Post by grumpy » Sun. Nov. 14, 2021 8:36 pm

Good Luck I did one of these too..

 
Cdon2948
Member
Posts: 84
Joined: Mon. Jan. 13, 2020 8:39 pm

Post by Cdon2948 » Tue. Nov. 16, 2021 7:56 pm

Paned wrote:
Sun. Nov. 14, 2021 8:21 pm
Another project on deck for winter. Gonna start on another one of my Florence stoves. I reluctantly sold my cherry 151 to a great friend last winter. I knew it would go to a great home and get another member to the coal family. So now I need to replace it. I’ll post pics of progress this winter in no hurry. Sending out nickel work to Brain at Mill Lake. Brian does exceptional work.
I see a Orr Painter & Reading Co. fireplace insert, tell me more about that one if you don't mind. I have their sunshine franklin model of the same patent date Dec 28th 1886.

 
Paned
Member
Posts: 177
Joined: Wed. Mar. 25, 2015 10:37 am
Location: Ohio
Baseburners & Antiques: Florence 153, 151; Imperial Acorn, Alert Acorn, Acme Carbon, Favorite 261, Favorite 416, Estate Square Oak

Post by Paned » Fri. Nov. 19, 2021 3:51 pm

Here is a picture. Had it for years planning on putting it one of my fireplaces but holding off for a Baltimore style heater.

Attachments



 
grumpy
Member
Posts: 12263
Joined: Sat. Jan. 02, 2010 12:28 am

Post by grumpy » Sat. Nov. 20, 2021 6:58 pm

When your finished..

Attachments

IMG_46919.JPG
.JPG | 613.7KB | IMG_46919.JPG

 
Paned
Member
Posts: 177
Joined: Wed. Mar. 25, 2015 10:37 am
Location: Ohio
Baseburners & Antiques: Florence 153, 151; Imperial Acorn, Alert Acorn, Acme Carbon, Favorite 261, Favorite 416, Estate Square Oak

Post by Paned » Sat. Nov. 20, 2021 7:16 pm

Great looking stove Grumpy.

 
Paned
Member
Posts: 177
Joined: Wed. Mar. 25, 2015 10:37 am
Location: Ohio
Baseburners & Antiques: Florence 153, 151; Imperial Acorn, Alert Acorn, Acme Carbon, Favorite 261, Favorite 416, Estate Square Oak

Post by Paned » Sun. Nov. 21, 2021 11:16 am

151 tore down needing a couple parts if any one has. Need top ring for firepot and secondary gas ring adjuster. Looks like new firepot will fit nicely. Pm me if anyone has them. See last two pictures. Thanks.

Attachments

740053BB-7FF8-44D4-B0D1-069D08739618.jpeg
.JPEG | 1.1MB | 740053BB-7FF8-44D4-B0D1-069D08739618.jpeg
26EF49BF-1441-4F3F-9B11-D729ACDC6897.jpeg
.JPEG | 1.3MB | 26EF49BF-1441-4F3F-9B11-D729ACDC6897.jpeg
C6AB92E5-19E4-489D-943C-377E1C74562B.jpeg
.JPEG | 1.1MB | C6AB92E5-19E4-489D-943C-377E1C74562B.jpeg

 
Paned
Member
Posts: 177
Joined: Wed. Mar. 25, 2015 10:37 am
Location: Ohio
Baseburners & Antiques: Florence 153, 151; Imperial Acorn, Alert Acorn, Acme Carbon, Favorite 261, Favorite 416, Estate Square Oak

Post by Paned » Fri. Dec. 17, 2021 7:58 am

Got the nickel back from Mill Lake. Turned out awesome. On the back burner until I get some parts. Sorry not a very good picture.

Attachments



 
Paned
Member
Posts: 177
Joined: Wed. Mar. 25, 2015 10:37 am
Location: Ohio
Baseburners & Antiques: Florence 153, 151; Imperial Acorn, Alert Acorn, Acme Carbon, Favorite 261, Favorite 416, Estate Square Oak

Post by Paned » Fri. Dec. 17, 2021 8:05 am

My old 151 chugging along over at Justin’s.

Attachments

7A437159-D79A-4D43-A320-22C6C2254715.png
.PNG | 2.4MB | 7A437159-D79A-4D43-A320-22C6C2254715.png

 
fig
Member
Posts: 1137
Joined: Fri. Feb. 12, 2016 2:36 pm
Hand Fed Coal Boiler: Harman SF360
Hand Fed Coal Stove: T.O.M (Warm Morning converted to baseburner by Steve) Round Oak 1917 Door model O-3, Warm Morning 400, Warm Morning 524, Warm Morning 414,Florence No.77, Warm Morning 523-b
Hand Fed Coal Furnace: Clayton 7.1/DS Machine basement stove/ Harman SF1500
Baseburners & Antiques: Renown Parlor stove 87B
Coal Size/Type: Bituminous/anthracite
Other Heating: Harman Accentra, enviro omega, Vermont Ironworks Elm stove, Quadrafire Mt Vernon, Logwood stove, Sotz barrel stove,

Post by fig » Fri. Dec. 17, 2021 6:45 pm

Wow that’s real nice. Very fine job!

Did you get this part? I need the acme type screw that goes to it if anyone has one they can part with.

Attachments

B1EE3DC2-E5B5-4A1F-A8E4-0DBB13221ED6.jpeg
.JPEG | 1.1MB | B1EE3DC2-E5B5-4A1F-A8E4-0DBB13221ED6.jpeg

 
Paned
Member
Posts: 177
Joined: Wed. Mar. 25, 2015 10:37 am
Location: Ohio
Baseburners & Antiques: Florence 153, 151; Imperial Acorn, Alert Acorn, Acme Carbon, Favorite 261, Favorite 416, Estate Square Oak

Post by Paned » Mon. Dec. 20, 2021 10:25 am

Got a few 151 parts sandblasted and painted. Probably be it for a while until I get some parts.

Attachments


Post Reply

Return to “Antiques, Baseburners, Kitchen Stoves, Restorations & Modern Reproductions”