Hello. I am looking for chimney bricks for a Locke 120. Does anyone reproduce these or have good condition ones they are willing to sell?
Thanks
Need brick! Locke 120
- warminmn
- Member
- Posts: 8111
- Joined: Tue. Feb. 08, 2011 5:59 pm
- Location: Land of 11,842 lakes
- Hand Fed Coal Stove: Chubby Junior, Efel Nestor Martin, Riteway 37
- Coal Size/Type: nut and stove anthracite, lignite
- Other Heating: Wood and wear a wool shirt
You may not find any. Include locke and warm morning in your search. Several members here have restored these stoves. You can start by searching this members posts. He has restored several of them and has some videos on youtube too. Sorry but Im not any more help with it. I didnt have any luck finding one without broken bricks as everyone burns wood here and they get broken that way. search.php?author_id=21012&sr=posts
-
- Member
- Posts: 4837
- Joined: Wed. Apr. 03, 2013 1:24 pm
- Location: Elkhart county, IN.
- Hand Fed Coal Stove: 1 comforter stove works all iron coal box stove, seventies.
- Baseburners & Antiques: 2014 DTS C17 Base Burner, GW #6, GW 113 formerly Sir Williams, maybe others at Pauliewog’s I’ve forgotten about
- Coal Size/Type: Nut Anth.
- Other Heating: none
IF you can get a reply from Buck47 he is indeed the most likely help.
on the other hand, there are guys here that have those stoves that might be willing to cast you a pair off their originals, maybe
I don't have any anymore, cleared most of my good WM stuff.
steve
PS, member jubileejerry might be able to help you get ahold of Buck47
on the other hand, there are guys here that have those stoves that might be willing to cast you a pair off their originals, maybe
I don't have any anymore, cleared most of my good WM stuff.
steve
PS, member jubileejerry might be able to help you get ahold of Buck47
- McGiever
- Member
- Posts: 10130
- Joined: Sun. May. 02, 2010 11:26 pm
- Location: Junction of PA-OH-WV
- Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
- Hand Fed Coal Boiler: BUCKET A DAY water heater
- Hand Fed Coal Stove: Warm Morning 414A
- Coal Size/Type: PEA,NUT,STOVE /ANTHRACITE
- Other Heating: Ground Source Heat Pump and some Solar
There is a member here who shows how he used a masonry wet saw and configured brick cuts to copy the needed bricks. I'll see if I can find and add that thread link...
-
- Member
- Posts: 85
- Joined: Wed. Oct. 07, 2015 9:12 pm
- Hand Fed Coal Stove: Warm morning 400B.
- Baseburners & Antiques: Germer Radient Home A18, Glenwood #8 Baseheater, Phillips & Clark Oakvale Andes 161.
- Coal Size/Type: Nut/Stove Bituminious
- Other Heating: Electric baseboard
Have you tried Woodmans Parts Plus?
-
- Member
- Posts: 4837
- Joined: Wed. Apr. 03, 2013 1:24 pm
- Location: Elkhart county, IN.
- Hand Fed Coal Stove: 1 comforter stove works all iron coal box stove, seventies.
- Baseburners & Antiques: 2014 DTS C17 Base Burner, GW #6, GW 113 formerly Sir Williams, maybe others at Pauliewog’s I’ve forgotten about
- Coal Size/Type: Nut Anth.
- Other Heating: none
McG, that vid and pics were for a square body stove and awesome for the application. the same technique could be used to just cut standard hardware store splits on angles to match the rest of the radius bricks in the 120-520 stove and eliminate the chimneys.
the big question is if the stove will burn strictly anth. or maybe Bit and or Lignite. you need the chimneys for the later two due to heavy volatile production of those fuels. the 120-520 stoves have enough secondary in the top casting to deal with the gasses from Anth. if used properly.
no luck at woodsmans, haven't seen any of the "spear head" chimney bricks for sale new for a long time.
the big question is if the stove will burn strictly anth. or maybe Bit and or Lignite. you need the chimneys for the later two due to heavy volatile production of those fuels. the 120-520 stoves have enough secondary in the top casting to deal with the gasses from Anth. if used properly.
no luck at woodsmans, haven't seen any of the "spear head" chimney bricks for sale new for a long time.