moores air tight 403 b ...

Post Reply
 
Stormysummerz
New Member
Posts: 3
Joined: Sun. Aug. 16, 2020 10:48 pm
Other Heating: wood stove looking at coal

Post by Stormysummerz » Wed. Aug. 19, 2020 7:58 pm

Hello I am new to this page and I have just acquired my 1st coal stove it is a Moore's airtight for 3BI am looking for a base for it and also the decorative top piece.. Please message me if you can if you have either of these 336 488 0227

 
User avatar
freetown fred
Member
Posts: 30293
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Wed. Aug. 19, 2020 8:20 pm

Pix would really help S. Welcome my friend. :)

 
User avatar
mntbugy
Member
Posts: 2043
Joined: Fri. Dec. 23, 2016 2:36 pm
Location: clearfield,pa
Hand Fed Coal Stove: D S 1500, Warm Moring 400
Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
Coal Size/Type: stove and nut and some bit
Other Heating: Propain

Post by mntbugy » Thu. Aug. 20, 2020 8:41 pm

There is a swing top with topper/finial on eBay. Search parlor stove. It is really over priced at 450 bucks.


 
Stormysummerz
New Member
Posts: 3
Joined: Sun. Aug. 16, 2020 10:48 pm
Other Heating: wood stove looking at coal

Post by Stormysummerz » Fri. Dec. 04, 2020 11:24 am

I'm not good at this technical stuff can't figure how to load pics. Need to find a base and finale

 
longtobe
New Member
Posts: 2
Joined: Sun. Mar. 21, 2021 1:16 pm

Post by longtobe » Sun. Mar. 21, 2021 1:57 pm

I know it's be a bit since you posted. But I have a final & base that might work. It's off of a Moore's air tight heater. 870-214-8153

Post Reply

Return to “Antiques, Baseburners, Kitchen Stoves, Restorations & Modern Reproductions”