Hi All,
I recently purchased a Godin 3726 and the smoke box needs reattaching.
Can anyone suggest how to do this?
Cheers
Ken
Re-attaching a GODIN flue manifold / smoke box
-
- Site Moderator
- Posts: 11417
- Joined: Wed. Nov. 05, 2008 5:11 pm
- Location: Kent CT
- Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
- Baseburners & Antiques: Glenwood Modern Oak 114
- Coal Size/Type: nut and pea
That exit flange looks to be going off at and angle. It should be at 90 degrees to the stove. The smoke manifold might be upside down.
To take it off will probably involve broken screws, drilling out and re-tapping.
To take it off will probably involve broken screws, drilling out and re-tapping.
-
- Member
- Posts: 673
- Joined: Sun. Nov. 17, 2019 2:17 pm
It looks like there is ALOT of furnace cement all over it.
http://eurafrican.co.za/wp-content/uploads/2016/1 ... 6-3727.pdf
Petit Godin 3271 Restore
http://eurafrican.co.za/wp-content/uploads/2016/1 ... 6-3727.pdf
Petit Godin 3271 Restore