Plastic refractory cement

Post Reply
 
D.lapan
Member
Posts: 771
Joined: Sun. Jan. 18, 2015 9:40 pm
Location: plainfield NH
Hand Fed Coal Furnace: newmac wood,coal,oil como
Baseburners & Antiques: 20th century laurel, glenwood hickory,crawford fairy
Coal Size/Type: nut, stove
Contact:

Post by D.lapan » Tue. Dec. 18, 2018 5:08 pm

Where are some of your getting your noxram or really any kind of plastic refractory?
I’ve been looking online and I have only found one place that sells it and it’s $25 shipping for 1 package, if that’s the going rate then I’m fine I would just like to know I’m not getting hosed
Dana

 
Paned
Member
Posts: 177
Joined: Wed. Mar. 25, 2015 10:37 am
Location: Ohio
Baseburners & Antiques: Florence 153, 151; Imperial Acorn, Alert Acorn, Acme Carbon, Favorite 261, Favorite 416, Estate Square Oak

Post by Paned » Tue. Dec. 18, 2018 5:47 pm

Dana

Menards carries it in small buckets. Just add water and mix. Just lined the 151 with one small bucket. Plenty left. I lined my 153 about 4 seasons ago still looks like new. Hope this helps.

Attachments


 
D.lapan
Member
Posts: 771
Joined: Sun. Jan. 18, 2015 9:40 pm
Location: plainfield NH
Hand Fed Coal Furnace: newmac wood,coal,oil como
Baseburners & Antiques: 20th century laurel, glenwood hickory,crawford fairy
Coal Size/Type: nut, stove
Contact:

Post by D.lapan » Tue. Dec. 18, 2018 6:21 pm

Is that menards brand?


 
User avatar
coaledsweat
Site Moderator
Posts: 13767
Joined: Fri. Oct. 27, 2006 2:05 pm
Location: Guilford, Connecticut
Stoker Coal Boiler: Axeman Anderson 260M
Coal Size/Type: Pea

Post by coaledsweat » Tue. Dec. 18, 2018 7:34 pm

Use a real refractory. The plastic stuff will not last.

 
scalabro
Member
Posts: 4197
Joined: Wed. Oct. 03, 2012 9:53 am
Location: Western Massachusetts
Baseburners & Antiques: Crawford 40, PP Stewart No. 14, Abendroth Bros "Record 40"
Coal Size/Type: Stove / Anthracite.
Other Heating: Oil fired, forced hot air.

Post by scalabro » Tue. Dec. 18, 2018 7:39 pm

I’ve wondered whether a one piece lining would crack due to heat expansion, whereas individual bricks can move around a bit :?:

 
Paned
Member
Posts: 177
Joined: Wed. Mar. 25, 2015 10:37 am
Location: Ohio
Baseburners & Antiques: Florence 153, 151; Imperial Acorn, Alert Acorn, Acme Carbon, Favorite 261, Favorite 416, Estate Square Oak

Post by Paned » Tue. Dec. 18, 2018 8:04 pm

They carry Meeco refractory cement.


 
User avatar
mntbugy
Member
Posts: 2046
Joined: Fri. Dec. 23, 2016 2:36 pm
Location: clearfield,pa
Hand Fed Coal Stove: D S 1500, Warm Moring 400
Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
Coal Size/Type: stove and nut and some bit
Other Heating: Propain

Post by mntbugy » Tue. Dec. 18, 2018 11:41 pm


 
User avatar
McGiever
Member
Posts: 10130
Joined: Sun. May. 02, 2010 11:26 pm
Location: Junction of PA-OH-WV
Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
Hand Fed Coal Boiler: BUCKET A DAY water heater
Hand Fed Coal Stove: Warm Morning 414A
Coal Size/Type: PEA,NUT,STOVE /ANTHRACITE
Other Heating: Ground Source Heat Pump and some Solar

Post by McGiever » Wed. Dec. 19, 2018 1:05 am

D.lapan wrote:
Tue. Dec. 18, 2018 5:08 pm
Where are some of your getting your noxram or really any kind of plastic refractory?
I’ve been looking online and I have only found one place that sells it and it’s $25 shipping for 1 package, if that’s the going rate then I’m fine I would just like to know I’m not getting hosed
Dana
Dana, how much do you need?

$25.00 shipping is a bargain if that's for a 50 pound box.

 
D.lapan
Member
Posts: 771
Joined: Sun. Jan. 18, 2015 9:40 pm
Location: plainfield NH
Hand Fed Coal Furnace: newmac wood,coal,oil como
Baseburners & Antiques: 20th century laurel, glenwood hickory,crawford fairy
Coal Size/Type: nut, stove
Contact:

Post by D.lapan » Wed. Dec. 19, 2018 6:41 am

That was for a 50lb box, if that’s not bad then I won’t worry about it

Post Reply

Return to “Antiques, Baseburners, Kitchen Stoves, Restorations & Modern Reproductions”