Anyone have any stragglers sitting around?

Post Reply
Kiletravis09
Member
Posts: 36
Joined: Wed. Nov. 02, 2016 11:09 pm
Location: Woodstock Ohio

Post By: Kiletravis09 » Mon. Oct. 15, 2018 7:24 pm

Hey guys. So I just finished my Cannon #20 stove restore and she’s plugged in and ready to go. I have had my eyes open online looking for my next restore. Anyone have any stragglers sitting around that are begging to be restored? I’m located in Ohio but willing to drive! I’m itching to my hands dirty again. Please help!

samhill
Member
Posts: 11817
Joined: Thu. Mar. 13, 2008 10:29 am
Hot Air Coal Stoker Furnace: keystoker 160
Hand Fed Coal Stove: hitzer 75 in garage
Stove/Furnace Make: keystoker/hitzer
Stove/Furnace Model: koker 160/ hitzer 75
Location: Linesville, Pa.

Post By: samhill » Mon. Oct. 15, 2018 7:28 pm

I have an old Royal Oak that's in pretty bad shape if your looking in that direction.

Kiletravis09
Member
Posts: 36
Joined: Wed. Nov. 02, 2016 11:09 pm
Location: Woodstock Ohio

Post By: Kiletravis09 » Mon. Oct. 15, 2018 8:19 pm

samhill wrote:
Mon. Oct. 15, 2018 7:28 pm
I have an old Royal Oak that's in pretty bad shape if your looking in that direction.
Any pics?


samhill
Member
Posts: 11817
Joined: Thu. Mar. 13, 2008 10:29 am
Hot Air Coal Stoker Furnace: keystoker 160
Hand Fed Coal Stove: hitzer 75 in garage
Stove/Furnace Make: keystoker/hitzer
Stove/Furnace Model: koker 160/ hitzer 75
Location: Linesville, Pa.

Post By: samhill » Tue. Oct. 16, 2018 6:48 am

I might be able to get some but my phone takes crappy pics. As far as I recall the casting has a crack which could be brazed or welded or more easily a ram material as a liner. However it would need a new barrel rolled & the finial is missing otherwise I think it's complete. I'll see if I can get things moved around to get some pics if your interested.

KingCoal
Member
Posts: 3564
Joined: Wed. Apr. 03, 2013 1:24 pm
Hand Fed Coal Stove: 2-Locke Warm Morning #120, 1-Locke Warm Morning #524B, 1 - custom Locke Warm Morning Extended barrel Base Heater Double Heater
Baseburners & Antiques: 2014 DTS C17 Base Burner
Coal Size/Type: Nut Anth.
Other Heating: none
Location: Elkhart county, IN.

Post By: KingCoal » Tue. Oct. 16, 2018 7:44 am

i've got 2 Warm Morning 120 stoves at are just barrels and cast parts. one will need a full set of bricks which can be recast from originals. the other has a rolled steel liner and is basically a scrap wood shop heater.

i also have a complete Warm Morning 524. this is a HUGE stove that originally heated a large 2 story hardware store in Grand Rapids MI on it's own from the basement. totally complete with very good bricks, will need a good clean up and maybe a new barrel ( haven't looked that close at it )

this stove holds 200#'s of coal.

i don't have much in any of these stoves just like to move them along for room in my small garage / shop

PM me if interested. i've got good sets of pics.

steve

User avatar
Merc300d
Member
Posts: 478
Joined: Tue. Feb. 18, 2014 7:45 pm
Hand Fed Coal Stove: Glenwood 6 base heater
Baseburners & Antiques: Too many
Coal Size/Type: Nut
Other Heating: Oil base board
Location: Southeastern mass

Post By: Merc300d » Tue. Oct. 16, 2018 7:53 pm

I have plenty of great cylinder stoves , baseheaters , mica base burner , cook stoves that are just waiting to be brought back to life. Looking to move quite a few of them. PM me if you have any interest. I have plenty of pictures. Thanks


Christopher
New Member
Posts: 18
Joined: Wed. Mar. 09, 2016 5:45 pm
Hot Air Coal Stoker Stove: Round Oak#A-18, Round Oak #E18
Hand Fed Coal Stove: Dickson Oak#117
Baseburners & Antiques: Fairringgold #126, Round Oak copperiod Range

Post By: Christopher » Wed. Oct. 24, 2018 5:08 pm

Merc300d, By any chance do you have a swing top and door frame for a Andes Oak 616? I can probably get the frame recasted, but looking for an original but the swing top that will be trickery. I do have a Mountain Oak for sale roughly 1920 double heater
20180923_142557.jpg
20180923_142715.jpg

User avatar
Merc300d
Member
Posts: 478
Joined: Tue. Feb. 18, 2014 7:45 pm
Hand Fed Coal Stove: Glenwood 6 base heater
Baseburners & Antiques: Too many
Coal Size/Type: Nut
Other Heating: Oil base board
Location: Southeastern mass

Post By: Merc300d » Wed. Oct. 24, 2018 6:40 pm

Hi Christopher , unfortunately I do not own any Andes stoves. They are some of the best well built, beautifully styled stoves made of their time. Sorry i couldn’t help. Good luck in your search

Christopher
New Member
Posts: 18
Joined: Wed. Mar. 09, 2016 5:45 pm
Hot Air Coal Stoker Stove: Round Oak#A-18, Round Oak #E18
Hand Fed Coal Stove: Dickson Oak#117
Baseburners & Antiques: Fairringgold #126, Round Oak copperiod Range

Post By: Christopher » Thu. Oct. 25, 2018 6:09 am

Ok thank you, l agree that is why l purchased it,they are great stoves

Post Reply

Return to “Antiques, Baseburners, Kitchen Stoves, Restorations & Modern Reproductions”