Ease Autovector 30

Post Reply
New Member
Posts: 1
Joined: Mon. Jul. 02, 2018 11:46 pm
Baseburners & Antiques: Ease Autovector 30

Post By: Adrianvann » Mon. Jul. 02, 2018 11:54 pm

Good morning All. I recently bought an old Esse Autovector 30 and have it installed in my farm house living room. I have two questions please and would appreciate some guidance.
1. On the left hand round control there are no markings, which would be higher burning, turning to the right or left?. I found a thick plate inside the door which is loose and can be removed, what is this for as my old Esse L in my old home did not have any of these and worked a charm. I bought her for £20 on auction and bought five new window glasses.

User avatar
freetown fred
Posts: 23981
Joined: Thu. Dec. 31, 2009 12:33 pm
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut
Location: Freetown,NY 13803

Post By: freetown fred » Tue. Jul. 03, 2018 2:17 am

Pix A, be nice to see some pix. :)

User avatar
Site Moderator
Posts: 11753
Joined: Fri. Oct. 27, 2006 2:05 pm
Stoker Coal Boiler: Axeman Anderson 260M
Coal Size/Type: Pea
Location: Guilford, Connecticut

Post By: coaledsweat » Tue. Jul. 03, 2018 7:04 am

Plates above the firebox are typically baffles. Their purpose is to create a longer and/or a more convoluted path for the exhaust in order to capture more heat from it.

User avatar
Sunny Boy
Posts: 17771
Joined: Mon. Nov. 11, 2013 1:40 pm
Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
Coal Size/Type: Nuts !
Other Heating: Oil &electric plenum furnace
Location: Central NY

Post By: Sunny Boy » Tue. Jul. 03, 2018 7:26 am

Welcome Adrian,

Have you tried contacting ESSE ? I see they are still in business. https://www.esse.com/

They may still have info on that model.


Post Reply

Return to “Antiques, Baseburners, Kitchen Stoves, Restorations & Modern Reproductions”