Clarion 115

 
User avatar
Sunny Boy
Member
Posts: 17933
Joined: Mon. Nov. 11, 2013 1:40 pm
Location: Central NY
Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
Coal Size/Type: Nuts !
Other Heating: Oil &electric plenum furnace

Post by Sunny Boy » Sat. Jan. 06, 2018 6:39 pm

Real nice, MB !!!!!

So,....... what's the first thing your gonna cook in the top well oven ?

Paul


 
User avatar
mntbugy
Member
Posts: 577
Joined: Fri. Dec. 23, 2016 2:36 pm
Location: clearfield,pa
Hand Fed Coal Stove: D S 1500, Warm Moring 400
Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
Coal Size/Type: stove and nut and some bit
Other Heating: Propain

Post by mntbugy » Sat. Jan. 06, 2018 7:02 pm

Sunny Boy wrote:
Sat. Jan. 06, 2018 6:39 pm
Real nice, MB !!!!!

So,....... what's the first thing your gonna cook in the top well oven ?

Paul
My finger. Need a knob for swing top. Don't want to use the finial wing.

 
User avatar
Pauliewog
Member
Posts: 1510
Joined: Mon. Dec. 02, 2013 12:15 am
Location: Pittston, Pennsylvania
Hot Air Coal Stoker Furnace: Alaska 140 Dual Paddle Feed
Baseburners & Antiques: Fame Rosemont #20, Home Stove Works #25, Glenwood #6, Happy Thought Oak, Merry Bride #214, Sunnyside, Worlds Argand #114, New Golden Sun , & About 30 others.
Coal Size/Type: Stove, Chesnut, Pea, Rice / Anthracite

Post by Pauliewog » Sat. Jan. 06, 2018 7:48 pm

Wow Artie ...... It looks really great ! We're you able to save the bricks?

Paulie

 
User avatar
mntbugy
Member
Posts: 577
Joined: Fri. Dec. 23, 2016 2:36 pm
Location: clearfield,pa
Hand Fed Coal Stove: D S 1500, Warm Moring 400
Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
Coal Size/Type: stove and nut and some bit
Other Heating: Propain

Post by mntbugy » Sat. Jan. 06, 2018 7:54 pm

Repointed all but 2 brick. Made them from noxram. Repointed WM
bricks 20 years ago , they still look good.

The whole bottom of stove needs repolished from the sweat dripping off my chin and Easter basket.

 
User avatar
Pauliewog
Member
Posts: 1510
Joined: Mon. Dec. 02, 2013 12:15 am
Location: Pittston, Pennsylvania
Hot Air Coal Stoker Furnace: Alaska 140 Dual Paddle Feed
Baseburners & Antiques: Fame Rosemont #20, Home Stove Works #25, Glenwood #6, Happy Thought Oak, Merry Bride #214, Sunnyside, Worlds Argand #114, New Golden Sun , & About 30 others.
Coal Size/Type: Stove, Chesnut, Pea, Rice / Anthracite

Post by Pauliewog » Sat. Jan. 06, 2018 8:03 pm

mntbugy wrote:
Sat. Jan. 06, 2018 7:54 pm
Repointed all but 2 brick. Made them from noxram. Repointed WM
bricks 20 years ago , they still look good.

The whole bottom of stove needs repolished from the sweat dripping off my chin and Easter basket.
:lol: I'll bet very few of your neighbors were working in an 80* garage today. :lol:

I thought for sure you would post the other pic for the oil and propain burners to cry over.

Paulie

 
User avatar
michaelanthony
Member
Posts: 4541
Joined: Sat. Nov. 22, 2008 10:42 pm
Location: millinocket,me.
Hand Fed Coal Stove: Vigilant 2310, gold marc box stove, vogelzang pot belly coat rack
Baseburners & Antiques: Home Sparkle 12
Coal Size/Type: Coal Contractor's stove, a little Kimmels 'nut
Other Heating: Very cold FHA oil furnace

Post by michaelanthony » Sat. Jan. 06, 2018 8:23 pm

The stove looks great! nice work MB :yes:

 
User avatar
mntbugy
Member
Posts: 577
Joined: Fri. Dec. 23, 2016 2:36 pm
Location: clearfield,pa
Hand Fed Coal Stove: D S 1500, Warm Moring 400
Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
Coal Size/Type: stove and nut and some bit
Other Heating: Propain

Post by mntbugy » Sat. Jan. 06, 2018 8:27 pm

Pauliewog wrote:
Sat. Jan. 06, 2018 8:03 pm
:lol: I'll bet very few of your neighbors were working in an 80* garage today. :lol:

I thought for sure you would post the other pic for the oil and propain burners to cry over.

Paulie
Don't have that picture, deleted already. If you still have it ,you can post it.

 
User avatar
scalabro
Member
Posts: 3771
Joined: Wed. Oct. 03, 2012 9:53 am
Location: Western Massachusetts
Baseburners & Antiques: Crawford 40, PP Stewart No. 14, Abendroth Bros "Record 40"
Coal Size/Type: Stove / Anthracite.
Other Heating: Oil fired, forced hot air.

Post by scalabro » Sat. Jan. 06, 2018 8:35 pm

Nice job! 👍


 
User avatar
Pauliewog
Member
Posts: 1510
Joined: Mon. Dec. 02, 2013 12:15 am
Location: Pittston, Pennsylvania
Hot Air Coal Stoker Furnace: Alaska 140 Dual Paddle Feed
Baseburners & Antiques: Fame Rosemont #20, Home Stove Works #25, Glenwood #6, Happy Thought Oak, Merry Bride #214, Sunnyside, Worlds Argand #114, New Golden Sun , & About 30 others.
Coal Size/Type: Stove, Chesnut, Pea, Rice / Anthracite

Post by Pauliewog » Sat. Jan. 06, 2018 9:12 pm

I'll post this picture for the benefit of the guests visiting the forum who are struggling in this below zero weather with the high cost of oil, propane, pellets, or electric heat, and are considering the advantages of switching to coal.
Screenshot_2018-01-06-20-37-31.png

Working on the Clarion 115

.PNG | 1.7MB | Screenshot_2018-01-06-20-37-31.png


For those of us with an attached garage, when the outside temperatures drop down in the single digits or below and the wind is howling we have a number of choices.

Rather than crack our windows open to grab a little fresh air and attempt to raise the outside temperature a bit, opening the door into the garage is another option available for a coal burner to shed some excess heat and create a comfortable 80* area to work on our projects.

Again, most of our members take working or lounging around the house in shorts and shirtless in the dead of the winter for granted, this post is for the benefit of our guests.

Paulie

 
User avatar
mntbugy
Member
Posts: 577
Joined: Fri. Dec. 23, 2016 2:36 pm
Location: clearfield,pa
Hand Fed Coal Stove: D S 1500, Warm Moring 400
Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
Coal Size/Type: stove and nut and some bit
Other Heating: Propain

Post by mntbugy » Sat. Jan. 06, 2018 9:16 pm

Warm Morning in the breezeway of garage. D.S. in the basement.

Also bare feet.

 
User avatar
mntbugy
Member
Posts: 577
Joined: Fri. Dec. 23, 2016 2:36 pm
Location: clearfield,pa
Hand Fed Coal Stove: D S 1500, Warm Moring 400
Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
Coal Size/Type: stove and nut and some bit
Other Heating: Propain

Post by mntbugy » Mon. Jan. 08, 2018 6:40 pm

The original bricks are in. Don't look to bad, The black furnace cement should flake off on test fire.

Next is massaging barrel seam flat spot, so back pipe flange sets better against barrel.
Going to use 8 pound sledge as anvil, and smack with smaller hammers. Do not have any body shop tools yet.
Might need to use 38 ounce Estwing with meat tenderizer end.

Attachments

stove pics 037.jpg
.JPG | 569.3KB | stove pics 037.jpg
Last edited by mntbugy on Mon. Jan. 08, 2018 9:26 pm, edited 1 time in total.

 
User avatar
michaelanthony
Member
Posts: 4541
Joined: Sat. Nov. 22, 2008 10:42 pm
Location: millinocket,me.
Hand Fed Coal Stove: Vigilant 2310, gold marc box stove, vogelzang pot belly coat rack
Baseburners & Antiques: Home Sparkle 12
Coal Size/Type: Coal Contractor's stove, a little Kimmels 'nut
Other Heating: Very cold FHA oil furnace

Post by michaelanthony » Mon. Jan. 08, 2018 9:23 pm

Nice job on those bricks! Did you cement both sides?

Speaking of barrel seam, back in the day they sure went to great lengths casting barrel to pipe flange with a channel to allow space for the seam. Why not offset the seam to one side or the other, no need to cut through the seam...just sayin'

 
User avatar
mntbugy
Member
Posts: 577
Joined: Fri. Dec. 23, 2016 2:36 pm
Location: clearfield,pa
Hand Fed Coal Stove: D S 1500, Warm Moring 400
Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
Coal Size/Type: stove and nut and some bit
Other Heating: Propain

Post by mntbugy » Mon. Jan. 08, 2018 9:29 pm

michaelanthony wrote:
Mon. Jan. 08, 2018 9:23 pm
Nice job on those bricks! Did you cement both sides?
Just ground a weld champher on back side, soaked in water for an hour.Put cement on crack,and champher, clamp.


New barrel already cut for load door and clinker door. Old barrel they cut through the folded seam.
Last edited by mntbugy on Mon. Jan. 08, 2018 9:47 pm, edited 3 times in total.

 
User avatar
michaelanthony
Member
Posts: 4541
Joined: Sat. Nov. 22, 2008 10:42 pm
Location: millinocket,me.
Hand Fed Coal Stove: Vigilant 2310, gold marc box stove, vogelzang pot belly coat rack
Baseburners & Antiques: Home Sparkle 12
Coal Size/Type: Coal Contractor's stove, a little Kimmels 'nut
Other Heating: Very cold FHA oil furnace

Post by michaelanthony » Mon. Jan. 08, 2018 9:30 pm

I hope you have a big space for that baby. :yes:

 
User avatar
mntbugy
Member
Posts: 577
Joined: Fri. Dec. 23, 2016 2:36 pm
Location: clearfield,pa
Hand Fed Coal Stove: D S 1500, Warm Moring 400
Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
Coal Size/Type: stove and nut and some bit
Other Heating: Propain

Post by mntbugy » Mon. Jan. 08, 2018 9:35 pm

It is almost the same size as d.s 1500. The 115 holds 6 pounds less.


Post Reply

Return to “Antiques, Baseburners, Kitchen Stoves, Restorations & Modern Reproductions”