Clarion 115
- mntbugy
- Member
- Posts: 2046
- Joined: Fri. Dec. 23, 2016 2:36 pm
- Location: clearfield,pa
- Hand Fed Coal Stove: D S 1500, Warm Moring 400
- Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
- Coal Size/Type: stove and nut and some bit
- Other Heating: Propain
Picked up a Wood & Bishop Clarion 115 on Tuesday.
Too some members, you seen this before.
Got the stove at the new lower price. Needs some fixes., like new barrel,recast draw center and grate,
maybe indirect damper. One crack to weld.
Here's pics.
Too some members, you seen this before.
Got the stove at the new lower price. Needs some fixes., like new barrel,recast draw center and grate,
maybe indirect damper. One crack to weld.
Here's pics.
Attachments
- mntbugy
- Member
- Posts: 2046
- Joined: Fri. Dec. 23, 2016 2:36 pm
- Location: clearfield,pa
- Hand Fed Coal Stove: D S 1500, Warm Moring 400
- Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
- Coal Size/Type: stove and nut and some bit
- Other Heating: Propain
Pics of nickel before and after
Attachments
- tcalo
- Member
- Posts: 2072
- Joined: Tue. Dec. 13, 2011 4:57 pm
- Location: Long Island, New York
- Baseburners & Antiques: Crawford 40
- Coal Size/Type: Nut/stove anthracite
Check that stove over REAL good. I made the trip and passed it up. Tons of hairline cracks throughout the base. Grate and grate support are in bad shape and the internal damper in the rear pipe is completely wrong. Best of luck!
- mntbugy
- Member
- Posts: 2046
- Joined: Fri. Dec. 23, 2016 2:36 pm
- Location: clearfield,pa
- Hand Fed Coal Stove: D S 1500, Warm Moring 400
- Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
- Coal Size/Type: stove and nut and some bit
- Other Heating: Propain
cleaned base chamber with shop vac today, it was packed full of ash.
Got legs and supports blasted and polished. Doors taken all apart.
Direct/indirect damper easy fix.
Internal check damper crack in wall, the check damper rod just fell off it's all there.
Any cracks are not to hard or costly to fix.
Did not pay much for it.
Got legs and supports blasted and polished. Doors taken all apart.
Direct/indirect damper easy fix.
Internal check damper crack in wall, the check damper rod just fell off it's all there.
Any cracks are not to hard or costly to fix.
Did not pay much for it.
Attachments
- mntbugy
- Member
- Posts: 2046
- Joined: Fri. Dec. 23, 2016 2:36 pm
- Location: clearfield,pa
- Hand Fed Coal Stove: D S 1500, Warm Moring 400
- Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
- Coal Size/Type: stove and nut and some bit
- Other Heating: Propain
Some more progress.
Attachments
- Sunny Boy
- Member
- Posts: 25724
- Joined: Mon. Nov. 11, 2013 1:40 pm
- Location: Central NY
- Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
- Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
- Coal Size/Type: Nuts !
- Other Heating: Oil &electric plenum furnace
Making good progress, Artie. Those parts are cleaning up real nice !!!
Paul
Paul
-
- Member
- Posts: 4197
- Joined: Wed. Oct. 03, 2012 9:53 am
- Location: Western Massachusetts
- Baseburners & Antiques: Crawford 40, PP Stewart No. 14, Abendroth Bros "Record 40"
- Coal Size/Type: Stove / Anthracite.
- Other Heating: Oil fired, forced hot air.
From the picture resolution shown, so far so good. The thin "firepot" casting and upper base/grate support are the critical areas. Fingers crossed. What is the grate diameter and depth of the pot....from the top of the bricks to the grate?
- mntbugy
- Member
- Posts: 2046
- Joined: Fri. Dec. 23, 2016 2:36 pm
- Location: clearfield,pa
- Hand Fed Coal Stove: D S 1500, Warm Moring 400
- Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
- Coal Size/Type: stove and nut and some bit
- Other Heating: Propain
S.B . Outside pics not done yet
Scott
Grate 13" dia. Depth in front 11" back 14". Barrel is 17x30 inch.
Fire pot is in good shape. Grate support base not good, couple cracks. Been practicing CI welding with CI rod.
I can use the 2 1/4'' hold down rods as filler. If I don't like the way it turns out, something else for recast.
Scott
Grate 13" dia. Depth in front 11" back 14". Barrel is 17x30 inch.
Fire pot is in good shape. Grate support base not good, couple cracks. Been practicing CI welding with CI rod.
I can use the 2 1/4'' hold down rods as filler. If I don't like the way it turns out, something else for recast.
-
- Member
- Posts: 4197
- Joined: Wed. Oct. 03, 2012 9:53 am
- Location: Western Massachusetts
- Baseburners & Antiques: Crawford 40, PP Stewart No. 14, Abendroth Bros "Record 40"
- Coal Size/Type: Stove / Anthracite.
- Other Heating: Oil fired, forced hot air.
That is a big pot, it will throw some heat for sure.
Is there a clean-out under the ash pan or just the two rectangular rear clean outs?
Is there a clean-out under the ash pan or just the two rectangular rear clean outs?
- mntbugy
- Member
- Posts: 2046
- Joined: Fri. Dec. 23, 2016 2:36 pm
- Location: clearfield,pa
- Hand Fed Coal Stove: D S 1500, Warm Moring 400
- Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
- Coal Size/Type: stove and nut and some bit
- Other Heating: Propain
Two rectangles in rear.
- Pauliewog
- Member
- Posts: 1824
- Joined: Mon. Dec. 02, 2013 12:15 am
- Location: Pittston, Pennsylvania
- Hot Air Coal Stoker Furnace: Alaska 140 Dual Paddle Feed
- Baseburners & Antiques: Fame Rosemont #20, Home Stove Works #25, Glenwood #6, Happy Thought Oak, Merry Bride #214, Sunnyside, Worlds Argand #114, New Golden Sun , & About 30 others.
- Coal Size/Type: Stove, Chesnut, Pea, Rice / Anthracite
Looking good Artie. The bricks look pretty good in the picture. Did you try taking them out ?
Paulie
Paulie
- mntbugy
- Member
- Posts: 2046
- Joined: Fri. Dec. 23, 2016 2:36 pm
- Location: clearfield,pa
- Hand Fed Coal Stove: D S 1500, Warm Moring 400
- Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
- Coal Size/Type: stove and nut and some bit
- Other Heating: Propain
Not yet, need to do yard and garden work.Pauliewog wrote:Looking good Artie. The bricks look pretty good in the picture. Did you try taking them out ?
Paulie
- mntbugy
- Member
- Posts: 2046
- Joined: Fri. Dec. 23, 2016 2:36 pm
- Location: clearfield,pa
- Hand Fed Coal Stove: D S 1500, Warm Moring 400
- Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
- Coal Size/Type: stove and nut and some bit
- Other Heating: Propain
Got a little more done.
Cleaned slag off of bricks with angle grinder. Used a coarse tooth hacksaw blade to clean out behind
bricks and fire pot, to get some wiggle room.
Nothing cleaned up, just taken apart.
Some pics.
Cleaned slag off of bricks with angle grinder. Used a coarse tooth hacksaw blade to clean out behind
bricks and fire pot, to get some wiggle room.
Nothing cleaned up, just taken apart.
Some pics.