Clarion 115

Post Reply
 
User avatar
mntbugy
Member
Posts: 2042
Joined: Fri. Dec. 23, 2016 2:36 pm
Location: clearfield,pa
Hand Fed Coal Stove: D S 1500, Warm Moring 400
Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
Coal Size/Type: stove and nut and some bit
Other Heating: Propain

Post by mntbugy » Thu. Sep. 21, 2017 3:58 pm

Picked up a Wood & Bishop Clarion 115 on Tuesday.

Too some members, you seen this before.

Got the stove at the new lower price. Needs some fixes., like new barrel,recast draw center and grate,
maybe indirect damper. One crack to weld.
Here's pics.

Attachments

stove pics 002.jpg
.JPG | 137.7KB | stove pics 002.jpg
stove pics 003.jpg
.JPG | 115.9KB | stove pics 003.jpg


 
User avatar
mntbugy
Member
Posts: 2042
Joined: Fri. Dec. 23, 2016 2:36 pm
Location: clearfield,pa
Hand Fed Coal Stove: D S 1500, Warm Moring 400
Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
Coal Size/Type: stove and nut and some bit
Other Heating: Propain

Post by mntbugy » Thu. Sep. 21, 2017 4:04 pm

stove pics 008.jpg

after scrub,polish, and wax

.JPG | 368.7KB | stove pics 008.jpg
Pics of nickel before and after

Attachments

stove pics 004.jpg

before

.JPG | 124.8KB | stove pics 004.jpg
stove pics 005.jpg

before

.JPG | 52.3KB | stove pics 005.jpg
stove pics 010.jpg

after

.JPG | 58.4KB | stove pics 010.jpg
stove pics 009.jpg

after

.JPG | 152.1KB | stove pics 009.jpg

 
User avatar
nortcan
Member
Posts: 3146
Joined: Sat. Feb. 20, 2010 3:32 pm
Location: Qc Canada

Post by nortcan » Thu. Sep. 21, 2017 5:49 pm

Coming very nice. Keep on sending photos... :yes:

 
User avatar
tcalo
Member
Posts: 2068
Joined: Tue. Dec. 13, 2011 4:57 pm
Location: Long Island, New York
Baseburners & Antiques: Crawford 40
Coal Size/Type: Nut/stove anthracite

Post by tcalo » Fri. Sep. 22, 2017 4:35 pm

Check that stove over REAL good. I made the trip and passed it up. Tons of hairline cracks throughout the base. Grate and grate support are in bad shape and the internal damper in the rear pipe is completely wrong. Best of luck!

 
User avatar
mntbugy
Member
Posts: 2042
Joined: Fri. Dec. 23, 2016 2:36 pm
Location: clearfield,pa
Hand Fed Coal Stove: D S 1500, Warm Moring 400
Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
Coal Size/Type: stove and nut and some bit
Other Heating: Propain

Post by mntbugy » Fri. Sep. 22, 2017 7:31 pm

cleaned base chamber with shop vac today, it was packed full of ash.
Got legs and supports blasted and polished. Doors taken all apart.

Direct/indirect damper easy fix.
Internal check damper crack in wall, the check damper rod just fell off it's all there.
Any cracks are not to hard or costly to fix.
Did not pay much for it.

Attachments

stove pics.jpg
.JPG | 266.5KB | stove pics.jpg

 
User avatar
mntbugy
Member
Posts: 2042
Joined: Fri. Dec. 23, 2016 2:36 pm
Location: clearfield,pa
Hand Fed Coal Stove: D S 1500, Warm Moring 400
Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
Coal Size/Type: stove and nut and some bit
Other Heating: Propain

Post by mntbugy » Mon. Sep. 25, 2017 1:28 pm

Some more progress.

Attachments

stove pics 012.jpg
.JPG | 104KB | stove pics 012.jpg
stove pics 013.jpg

These parts have TC15-1897-xx part numbers

.JPG | 182.9KB | stove pics 013.jpg
stove pics 014.jpg
.JPG | 349.1KB | stove pics 014.jpg
stove pics 015.jpg
.JPG | 177KB | stove pics 015.jpg
stove pics 016.jpg

Back 2/3 of pot the same TC15-1897-xx plus wash bowel on top of barrel

.JPG | 91.6KB | stove pics 016.jpg

 
User avatar
Sunny Boy
Member
Posts: 25553
Joined: Mon. Nov. 11, 2013 1:40 pm
Location: Central NY
Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
Coal Size/Type: Nuts !
Other Heating: Oil &electric plenum furnace

Post by Sunny Boy » Mon. Sep. 25, 2017 6:44 pm

Making good progress, Artie. Those parts are cleaning up real nice !!!

Paul


 
scalabro
Member
Posts: 4197
Joined: Wed. Oct. 03, 2012 9:53 am
Location: Western Massachusetts
Baseburners & Antiques: Crawford 40, PP Stewart No. 14, Abendroth Bros "Record 40"
Coal Size/Type: Stove / Anthracite.
Other Heating: Oil fired, forced hot air.

Post by scalabro » Mon. Sep. 25, 2017 6:55 pm

From the picture resolution shown, so far so good. The thin "firepot" casting and upper base/grate support are the critical areas. Fingers crossed. What is the grate diameter and depth of the pot....from the top of the bricks to the grate?

 
User avatar
mntbugy
Member
Posts: 2042
Joined: Fri. Dec. 23, 2016 2:36 pm
Location: clearfield,pa
Hand Fed Coal Stove: D S 1500, Warm Moring 400
Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
Coal Size/Type: stove and nut and some bit
Other Heating: Propain

Post by mntbugy » Mon. Sep. 25, 2017 7:46 pm

S.B . Outside pics not done yet

Scott
Grate 13" dia. Depth in front 11" back 14". Barrel is 17x30 inch.
Fire pot is in good shape. Grate support base not good, couple cracks. Been practicing CI welding with CI rod.
I can use the 2 1/4'' hold down rods as filler. If I don't like the way it turns out, something else for recast.

 
scalabro
Member
Posts: 4197
Joined: Wed. Oct. 03, 2012 9:53 am
Location: Western Massachusetts
Baseburners & Antiques: Crawford 40, PP Stewart No. 14, Abendroth Bros "Record 40"
Coal Size/Type: Stove / Anthracite.
Other Heating: Oil fired, forced hot air.

Post by scalabro » Mon. Sep. 25, 2017 8:05 pm

That is a big pot, it will throw some heat for sure.

Is there a clean-out under the ash pan or just the two rectangular rear clean outs?

 
User avatar
mntbugy
Member
Posts: 2042
Joined: Fri. Dec. 23, 2016 2:36 pm
Location: clearfield,pa
Hand Fed Coal Stove: D S 1500, Warm Moring 400
Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
Coal Size/Type: stove and nut and some bit
Other Heating: Propain

Post by mntbugy » Mon. Sep. 25, 2017 9:53 pm

Two rectangles in rear.

 
scalabro
Member
Posts: 4197
Joined: Wed. Oct. 03, 2012 9:53 am
Location: Western Massachusetts
Baseburners & Antiques: Crawford 40, PP Stewart No. 14, Abendroth Bros "Record 40"
Coal Size/Type: Stove / Anthracite.
Other Heating: Oil fired, forced hot air.

Post by scalabro » Mon. Sep. 25, 2017 9:58 pm

Same as the Glenwood.

 
User avatar
Pauliewog
Member
Posts: 1824
Joined: Mon. Dec. 02, 2013 12:15 am
Location: Pittston, Pennsylvania
Hot Air Coal Stoker Furnace: Alaska 140 Dual Paddle Feed
Baseburners & Antiques: Fame Rosemont #20, Home Stove Works #25, Glenwood #6, Happy Thought Oak, Merry Bride #214, Sunnyside, Worlds Argand #114, New Golden Sun , & About 30 others.
Coal Size/Type: Stove, Chesnut, Pea, Rice / Anthracite

Post by Pauliewog » Tue. Sep. 26, 2017 9:38 pm

Looking good Artie. The bricks look pretty good in the picture. Did you try taking them out ?

Paulie

 
User avatar
mntbugy
Member
Posts: 2042
Joined: Fri. Dec. 23, 2016 2:36 pm
Location: clearfield,pa
Hand Fed Coal Stove: D S 1500, Warm Moring 400
Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
Coal Size/Type: stove and nut and some bit
Other Heating: Propain

Post by mntbugy » Tue. Sep. 26, 2017 10:04 pm

Pauliewog wrote:Looking good Artie. The bricks look pretty good in the picture. Did you try taking them out ?

Paulie
Not yet, need to do yard and garden work.

 
User avatar
mntbugy
Member
Posts: 2042
Joined: Fri. Dec. 23, 2016 2:36 pm
Location: clearfield,pa
Hand Fed Coal Stove: D S 1500, Warm Moring 400
Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
Coal Size/Type: stove and nut and some bit
Other Heating: Propain

Post by mntbugy » Wed. Sep. 27, 2017 7:18 pm

Got a little more done.
Cleaned slag off of bricks with angle grinder. Used a coarse tooth hacksaw blade to clean out behind
bricks and fire pot, to get some wiggle room.

Nothing cleaned up, just taken apart.
Some pics.

Attachments

stove pics 017.jpg
.JPG | 103.7KB | stove pics 017.jpg
stove pics 018.jpg

Recast pile started.

.JPG | 152.5KB | stove pics 018.jpg
stove pics 019.jpg

The good, the bad, and the ugly.

.JPG | 163.8KB | stove pics 019.jpg
stove pics 020.jpg
.JPG | 172KB | stove pics 020.jpg


Post Reply

Return to “Antiques, Baseburners, Kitchen Stoves, Restorations & Modern Reproductions”