My GW 116
- Pauliewog
- Member
- Posts: 1824
- Joined: Mon. Dec. 02, 2013 12:15 am
- Location: Pittston, Pennsylvania
- Hot Air Coal Stoker Furnace: Alaska 140 Dual Paddle Feed
- Baseburners & Antiques: Fame Rosemont #20, Home Stove Works #25, Glenwood #6, Happy Thought Oak, Merry Bride #214, Sunnyside, Worlds Argand #114, New Golden Sun , & About 30 others.
- Coal Size/Type: Stove, Chesnut, Pea, Rice / Anthracite
Before you decide on replating,check out Mntbugy's Glenwood 114 thread . He did a great job polishing up the original nickel.
Paulie
Paulie
- mntbugy
- Member
- Posts: 2046
- Joined: Fri. Dec. 23, 2016 2:36 pm
- Location: clearfield,pa
- Hand Fed Coal Stove: D S 1500, Warm Moring 400
- Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
- Coal Size/Type: stove and nut and some bit
- Other Heating: Propain
Try Skips idea on nickle cleaning. That's what I used. Soak 24hrs in baking soda and washing soda water with a couple Brillow pads or S.O.S..
Brillow has blue jewelers rouge in it. Then rub brillow on parts. Finish with chrome polish.
I spent 4hrs on finial alone to get shinny. Skirt parts shined up alot quicker
Miss spoke it's Dfrost idea
Brillow has blue jewelers rouge in it. Then rub brillow on parts. Finish with chrome polish.
I spent 4hrs on finial alone to get shinny. Skirt parts shined up alot quicker
Miss spoke it's Dfrost idea
- philthy
- Member
- Posts: 163
- Joined: Sat. Nov. 09, 2013 9:15 pm
- Location: Newville PA
- Hot Air Coal Stoker Stove: Keystoke Koker Lite, Alaska Kast Konsole
- Baseburners & Antiques: Glenwood #6, Glenwood #116 x 2, Crawford 40
Update on the nickel,
I did talk to mtbugy about the best way to polish up the nickel. I gotta say it worked great! Problem is there wasn't much nickel under all that crude. I'd say it was about 50% gone. Would've been great if the nickel was in better shape but its not the end of the world either. At least I learned something along the way.
I did talk to mtbugy about the best way to polish up the nickel. I gotta say it worked great! Problem is there wasn't much nickel under all that crude. I'd say it was about 50% gone. Would've been great if the nickel was in better shape but its not the end of the world either. At least I learned something along the way.
- mntbugy
- Member
- Posts: 2046
- Joined: Fri. Dec. 23, 2016 2:36 pm
- Location: clearfield,pa
- Hand Fed Coal Stove: D S 1500, Warm Moring 400
- Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
- Coal Size/Type: stove and nut and some bit
- Other Heating: Propain
Your finial looks like it will clean up nice with light pressure scrub. Them ears are fragile.
Don't know about dome under finial.
Don't know about dome under finial.
- freetown fred
- Member
- Posts: 30302
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Location: Freetown,NY 13803
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
Lookin good P.
- mntbugy
- Member
- Posts: 2046
- Joined: Fri. Dec. 23, 2016 2:36 pm
- Location: clearfield,pa
- Hand Fed Coal Stove: D S 1500, Warm Moring 400
- Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
- Coal Size/Type: stove and nut and some bit
- Other Heating: Propain
your bricks look good, nice to see square nuts
- mntbugy
- Member
- Posts: 2046
- Joined: Fri. Dec. 23, 2016 2:36 pm
- Location: clearfield,pa
- Hand Fed Coal Stove: D S 1500, Warm Moring 400
- Baseburners & Antiques: Art Garland 145,GW114 ,Clarion 115, Vestal 20 Globe,New Royal22 Globe, Red Cross Oak 56,Acme Ventiduct 38,Radiant Airblast 626,Home Airblast 62,Moores #7,Moores 3way
- Coal Size/Type: stove and nut and some bit
- Other Heating: Propain
Looking good. Did Middletown do your nickel ??
- philthy
- Member
- Posts: 163
- Joined: Sat. Nov. 09, 2013 9:15 pm
- Location: Newville PA
- Hot Air Coal Stoker Stove: Keystoke Koker Lite, Alaska Kast Konsole
- Baseburners & Antiques: Glenwood #6, Glenwood #116 x 2, Crawford 40
Thanks mntbugy but no. That is actually just polished metal. I blasted it all clean as most of the original nickle was in poor shape. I then started sanding and polishing. I have a lot of time in it but to see it in person its not perfect by a long shot.mntbugy wrote:Looking good. Did Middletown do your nickel ??
- philthy
- Member
- Posts: 163
- Joined: Sat. Nov. 09, 2013 9:15 pm
- Location: Newville PA
- Hot Air Coal Stoker Stove: Keystoke Koker Lite, Alaska Kast Konsole
- Baseburners & Antiques: Glenwood #6, Glenwood #116 x 2, Crawford 40
Fellas it is with broken heart that I inform you that my wife went to be with the lord on January 19th. We found out she had cancer on July 13th of 2017 and exactly six months and six days later she was gone.
Iv'e debated for days about whether or not to post about this but this place has become somewhat of a second family to me. Even though I have never met any of you face to face, I feel as though I know many of you very well.
It seemed appropriate that I share this pic of her and Skip on our trip to pick up this GW 116 last March. I can tell you that her and Skip got along great and she brought home almost as much home as I did; none of it stove related.
Iv'e debated for days about whether or not to post about this but this place has become somewhat of a second family to me. Even though I have never met any of you face to face, I feel as though I know many of you very well.
It seemed appropriate that I share this pic of her and Skip on our trip to pick up this GW 116 last March. I can tell you that her and Skip got along great and she brought home almost as much home as I did; none of it stove related.
Attachments
- Sunny Boy
- Member
- Posts: 25749
- Joined: Mon. Nov. 11, 2013 1:40 pm
- Location: Central NY
- Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
- Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
- Coal Size/Type: Nuts !
- Other Heating: Oil &electric plenum furnace
So sorry to hear that, Philthy.
Prayers sent for her, you, and your family.
Paul
Prayers sent for her, you, and your family.
Paul
- Lightning
- Site Moderator
- Posts: 14669
- Joined: Wed. Nov. 16, 2011 9:51 am
- Location: Olean, NY
- Stoker Coal Boiler: Modified AA 130
- Coal Size/Type: Pea Size - Anthracite
It's difficult to find the right words but you have my sincerest condolences. She looks way to young, happy and full of life to have left this world so soon.
- michaelanthony
- Member
- Posts: 4550
- Joined: Sat. Nov. 22, 2008 10:42 pm
- Location: millinocket,me.
- Hand Fed Coal Stove: Vigilant 2310, gold marc box stove
- Hand Fed Coal Furnace: Gold Marc Independence
- Baseburners & Antiques: Home Sparkle 12
- Coal Size/Type: 'nut
- Other Heating: Fujitsu mini split, FHA oil furnace
So sorry my friend, God bless.