Art Garland No46
-
- New Member
- Posts: 5
- Joined: Sun. Feb. 22, 2015 8:30 pm
- Location: Tampa Bay Area, FL
- Baseburners & Antiques: Art Garland No 46
I am new to the forum and hoping to get some advice. I picked up an Art Garland No 46 at an estate sale. All though I have found various articles on base burners, I haven't found this particular No 46.
Would anyone on here have any info on this particular model?
I think I would like to restore it, for now just as a conversation piece. I plan on having it sand blasted but after that, is it better to apply paint or polish? I also plan on having nickel plating done. There are a couple of cracks that I am hoping to have repaired. ANY Advice will be appreciated!
JW
Attachments
- SWPaDon
- Member
- Posts: 9857
- Joined: Sun. Nov. 24, 2013 12:05 pm
- Location: Southwest Pa.
- Hand Fed Coal Furnace: Clayton 1600M
- Coal Size/Type: Bituminous
- Other Heating: Oil furnace
Welcome to the forum.
I can't help with your stove, but others here will be able to help you immensely.
Can you provide pictures of the inside also, along with the damaged areas?
I can't help with your stove, but others here will be able to help you immensely.
Can you provide pictures of the inside also, along with the damaged areas?
- SWPaDon
- Member
- Posts: 9857
- Joined: Sun. Nov. 24, 2013 12:05 pm
- Location: Southwest Pa.
- Hand Fed Coal Furnace: Clayton 1600M
- Coal Size/Type: Bituminous
- Other Heating: Oil furnace
Thanks for the added photos, that will save time when the guys that know these stoves get back online.
The first thing they usually ask for is pictures of the firepot and grates.
The first thing they usually ask for is pictures of the firepot and grates.
- Pauliewog
- Member
- Posts: 1824
- Joined: Mon. Dec. 02, 2013 12:15 am
- Location: Pittston, Pennsylvania
- Hot Air Coal Stoker Furnace: Alaska 140 Dual Paddle Feed
- Baseburners & Antiques: Fame Rosemont #20, Home Stove Works #25, Glenwood #6, Happy Thought Oak, Merry Bride #214, Sunnyside, Worlds Argand #114, New Golden Sun , & About 30 others.
- Coal Size/Type: Stove, Chesnut, Pea, Rice / Anthracite
Welcome to the forum ! To get you started go up to the search box and type in Art Garland. One of the members has a thread on his . I think it is lefarm .
Another thing to do is go back to your profile page and fill in your location. You may be close to another member that may be able to help you with local sources for materials you will need.
There is a wealth of information here and great advice to get you in the right direction.
Paulie
Another thing to do is go back to your profile page and fill in your location. You may be close to another member that may be able to help you with local sources for materials you will need.
There is a wealth of information here and great advice to get you in the right direction.
Paulie
- SWPaDon
- Member
- Posts: 9857
- Joined: Sun. Nov. 24, 2013 12:05 pm
- Location: Southwest Pa.
- Hand Fed Coal Furnace: Clayton 1600M
- Coal Size/Type: Bituminous
- Other Heating: Oil furnace
You were right about LS Farm, his thread is here: Art Garland Baseburner "Double Heater"Pauliewog wrote:Welcome to the forum ! To get you started go up to the search box and type in Art Garland. One of the members has a thread on his . I think it is lefarm .
Another thing to do is go back to your profile page and fill in your location. You may be close to another member that may be able to help you with local sources for materials you will need.
There is a wealth of information here and great advice to get you in the right direction.
Paulie
- Pauliewog
- Member
- Posts: 1824
- Joined: Mon. Dec. 02, 2013 12:15 am
- Location: Pittston, Pennsylvania
- Hot Air Coal Stoker Furnace: Alaska 140 Dual Paddle Feed
- Baseburners & Antiques: Fame Rosemont #20, Home Stove Works #25, Glenwood #6, Happy Thought Oak, Merry Bride #214, Sunnyside, Worlds Argand #114, New Golden Sun , & About 30 others.
- Coal Size/Type: Stove, Chesnut, Pea, Rice / Anthracite
Thanks for posting the link Don ......... I've been waiting all day for your new CL stove posts..... but I appreciate the good jokes too !SWPaDon wrote:
You were right about LS Farm, his thread is here: Art Garland Baseburner "Double Heater"
Paulie
- SWPaDon
- Member
- Posts: 9857
- Joined: Sun. Nov. 24, 2013 12:05 pm
- Location: Southwest Pa.
- Hand Fed Coal Furnace: Clayton 1600M
- Coal Size/Type: Bituminous
- Other Heating: Oil furnace
I couldn't find any new CL ads yesterday.Pauliewog wrote:Thanks for posting the link Don ......... I've been waiting all day for your new CL stove posts..... but I appreciate the good jokes too !SWPaDon wrote:
You were right about LS Farm, his thread is here: Art Garland Baseburner "Double Heater"
Paulie
This Art Garland will be a beautiful stove once completed.
- Sunny Boy
- Member
- Posts: 25756
- Joined: Mon. Nov. 11, 2013 1:40 pm
- Location: Central NY
- Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
- Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
- Coal Size/Type: Nuts !
- Other Heating: Oil &electric plenum furnace
Welcome,
Those cracks can be welded, but you need to find a welder who is experienced in welding cast iron. Not all professional welders are these days.
Paul
Those cracks can be welded, but you need to find a welder who is experienced in welding cast iron. Not all professional welders are these days.
Paul
-
- Member
- Posts: 216
- Joined: Thu. May. 22, 2008 2:24 pm
- Location: Acworth, NH
- Baseburners & Antiques: Glenwood No. 6 BH, Crawfords No.2 & 3 BH, Hub Heater 115 Circulator, Crawford Wood 19
- Other Heating: Oil
Welcome to the forum - you've found the BEST place for antique coal stove info.
There are many members who have collections of stoves of all types, including Garland Base Burners.
I believe I have at least one Garland catalog. I'll check and see if it has your No. 46.
This type of stove is very time consuming to restore, due to its complexity and the delicate castings of the multiple mica doors. Plus, the nickle will cost a small fortune to have plated. I've wanted to get one for several years, but was put off by Emery at the stove hospital. They told me a couple of years ago they tend to stay away from them for those reasons.
However, they are amazing looking and amazing heaters. Hopefully you got it for a good price.
Please post lots of pictures of the process.
Chris
There are many members who have collections of stoves of all types, including Garland Base Burners.
I believe I have at least one Garland catalog. I'll check and see if it has your No. 46.
This type of stove is very time consuming to restore, due to its complexity and the delicate castings of the multiple mica doors. Plus, the nickle will cost a small fortune to have plated. I've wanted to get one for several years, but was put off by Emery at the stove hospital. They told me a couple of years ago they tend to stay away from them for those reasons.
However, they are amazing looking and amazing heaters. Hopefully you got it for a good price.
Please post lots of pictures of the process.
Chris
- BPatrick
- Member
- Posts: 349
- Joined: Wed. Jan. 25, 2012 5:29 pm
- Location: Cassopolis, MI
- Baseburners & Antiques: 2 Crawford 40 Baseheaters
- Coal Size/Type: Stove Coal
- Other Heating: Herald Oak No. 18
You need to contact Emery at the Stove Hospital and have him restore your stove. This will be a beautiful, functional work of art by the time he's done with it. If your going to do it...do it right.
- Photog200
- Member
- Posts: 2063
- Joined: Tue. Feb. 05, 2013 7:11 pm
- Location: Fulton, NY
- Baseburners & Antiques: Colonial Clarion cook stove, Kineo #15 base burner & 2 Geneva Oak Andes #517's
- Coal Size/Type: Blaschak Chestnut
- Other Heating: Electric Baseboard
I am attaching an Art Garland catalog from 1888-89. It does not depict your exact stove but may give you a starting point for information.
Randy
Randy
Attachments
- Sunny Boy
- Member
- Posts: 25756
- Joined: Mon. Nov. 11, 2013 1:40 pm
- Location: Central NY
- Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
- Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
- Coal Size/Type: Nuts !
- Other Heating: Oil &electric plenum furnace
Thanks Randy. Very interesting.
Especially the sections about the cook stoves, the "stair-step" high oven cook stoves, and the ranges. It's one of the best examples I've seen so far of an original catalog with info that clearly shows the difference in kitchen stove types and options that were available back then.
Would you mind if I reposted that info in the Cookin' With Coal thread ?
Paul
Especially the sections about the cook stoves, the "stair-step" high oven cook stoves, and the ranges. It's one of the best examples I've seen so far of an original catalog with info that clearly shows the difference in kitchen stove types and options that were available back then.
Would you mind if I reposted that info in the Cookin' With Coal thread ?
Paul
- Pauliewog
- Member
- Posts: 1824
- Joined: Mon. Dec. 02, 2013 12:15 am
- Location: Pittston, Pennsylvania
- Hot Air Coal Stoker Furnace: Alaska 140 Dual Paddle Feed
- Baseburners & Antiques: Fame Rosemont #20, Home Stove Works #25, Glenwood #6, Happy Thought Oak, Merry Bride #214, Sunnyside, Worlds Argand #114, New Golden Sun , & About 30 others.
- Coal Size/Type: Stove, Chesnut, Pea, Rice / Anthracite
Randy,Photog200 wrote:I am attaching an Art Garland catalog from 1888-89. It does not depict your exact stove but may give you a starting point for information.
Randy
Looking at the pictures posted by the OP his Art Garland was made by the Michigan Stove Company. That may explain why there is no reference to the stove in the Canadian catalog.
I had a similar issue when searching the John M Wolf Company plate on my Rosemont. It turned out Wolf Co. bought out Floyd Wells Co and installed their cast nameplate on the later Rosemonts.
Paulie
- Sunny Boy
- Member
- Posts: 25756
- Joined: Mon. Nov. 11, 2013 1:40 pm
- Location: Central NY
- Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
- Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
- Coal Size/Type: Nuts !
- Other Heating: Oil &electric plenum furnace
To further confuse us, some well established eastern stove companies moved out west, or opened additional factories in other parts of the country as the country was still growing westward in the late 19th and early 20th centuries.
Where stoves were made can be confusing at times, ...... almost as confusing as the companies that made them.
Paul
Where stoves were made can be confusing at times, ...... almost as confusing as the companies that made them.
Paul