Question About A Glenwood Oak 40 I've Found
-
- Member
- Posts: 216
- Joined: Thu. May. 22, 2008 2:24 pm
- Location: Acworth, NH
- Baseburners & Antiques: Glenwood No. 6 BH, Crawfords No.2 & 3 BH, Hub Heater 115 Circulator, Crawford Wood 19
- Other Heating: Oil
Hello everyone. Haven't posted in a number of years, as I have been happily heating our house in western New Hampshire with two Grand Godins and a Petit Godin. I've loved the Grand Godins, but they seem to use a lot of coal and the coal dust is really a pain.
I have a Smith Anthony Pearl Hub 1910 range I've been considering letting the guys at Antique Stove Hospital restore. After a couple of lengthy discussions with them, they advised me that the Grand Godins are very inefficient, and that I have been wasting a lot of coal (money) using them to heat with. They recommended I get a Glenwood Oak, base heater or even a City Glenwood (hybrid) which are the best and most efficient of the cylinder stoves. After I hung up from speaking with Emery, I signed onto eBay, and immediately found a City Glenwood in Rhode Island. I did Buy it Now for $85.00, since the owner stated it was complete with all trim. It turns out it may be missing the top beauty ring, but it appears the fenders are both there. I plan to pick it up next weekend, and restore it this summer. I'll need to find a beauty ring - maybe Emery can help? Of course, I was just down to RI last weekend to pickup a Lange 6303A I bought for $75 on eBay (for my woodshop).
While returning from picking up a ton of nut coal today, I stumbled upon a really nice Glenwood Oak 40 at a second hand store (I know he's had it a while). It appears complete, has the correct 3 sided coal grates, and no cracks I can see. He's asking $875. I'm considering making an offer of $800 (on layaway). I know from my recent studies that these are GREAT stoves. It appears that the 40 is not very common. It needs a complete rebuild, of course.
My question is should I grab it for my kitchen at that price? Would it produce too much heat for one large room? I don't really want to spend the money right now, but I hate to pass a beautiful Glenwood jewel by.
Any advise is greatly appreciated - Chris
I have a Smith Anthony Pearl Hub 1910 range I've been considering letting the guys at Antique Stove Hospital restore. After a couple of lengthy discussions with them, they advised me that the Grand Godins are very inefficient, and that I have been wasting a lot of coal (money) using them to heat with. They recommended I get a Glenwood Oak, base heater or even a City Glenwood (hybrid) which are the best and most efficient of the cylinder stoves. After I hung up from speaking with Emery, I signed onto eBay, and immediately found a City Glenwood in Rhode Island. I did Buy it Now for $85.00, since the owner stated it was complete with all trim. It turns out it may be missing the top beauty ring, but it appears the fenders are both there. I plan to pick it up next weekend, and restore it this summer. I'll need to find a beauty ring - maybe Emery can help? Of course, I was just down to RI last weekend to pickup a Lange 6303A I bought for $75 on eBay (for my woodshop).
While returning from picking up a ton of nut coal today, I stumbled upon a really nice Glenwood Oak 40 at a second hand store (I know he's had it a while). It appears complete, has the correct 3 sided coal grates, and no cracks I can see. He's asking $875. I'm considering making an offer of $800 (on layaway). I know from my recent studies that these are GREAT stoves. It appears that the 40 is not very common. It needs a complete rebuild, of course.
My question is should I grab it for my kitchen at that price? Would it produce too much heat for one large room? I don't really want to spend the money right now, but I hate to pass a beautiful Glenwood jewel by.
Any advise is greatly appreciated - Chris
- wsherrick
- Member
- Posts: 3744
- Joined: Wed. Jun. 18, 2008 6:04 am
- Location: High In The Poconos
- Hand Fed Coal Stove: Glenwood Base Heater, Crawford Base Heater
- Baseburners & Antiques: Crawford Base Heater, Glenwood, Stanley Argand
- Coal Size/Type: Chestnut, Stove Size
Does it have the indirect back pipe? The Glenwood Oak 40 is the largest of the Glenwood Oak line. It will heat a whole house.
-
- Member
- Posts: 216
- Joined: Thu. May. 22, 2008 2:24 pm
- Location: Acworth, NH
- Baseburners & Antiques: Glenwood No. 6 BH, Crawfords No.2 & 3 BH, Hub Heater 115 Circulator, Crawford Wood 19
- Other Heating: Oil
Thanks for the quick replies guys.
In my experience, when I start looking, I find, which can bankrupt you!
Yes - it does have the indirect back pipe
Should I get it - is it a killer price, or so so. Now I'm afraid I'll loose it.
More input would be very helpful.
Chris
In my experience, when I start looking, I find, which can bankrupt you!
Yes - it does have the indirect back pipe
Should I get it - is it a killer price, or so so. Now I'm afraid I'll loose it.
More input would be very helpful.
Chris
- wsherrick
- Member
- Posts: 3744
- Joined: Wed. Jun. 18, 2008 6:04 am
- Location: High In The Poconos
- Hand Fed Coal Stove: Glenwood Base Heater, Crawford Base Heater
- Baseburners & Antiques: Crawford Base Heater, Glenwood, Stanley Argand
- Coal Size/Type: Chestnut, Stove Size
Yes, that is a steal at that price, even if it needs a complete restoration. If I found it, I don't think I could resist it, even though I need another stove like a hole in the head. They are such beautiful, well designed stoves.
It is however, way too big for a single room. If I were you I would find a place to instal it even if I had to make a new chimney for it.
It is however, way too big for a single room. If I were you I would find a place to instal it even if I had to make a new chimney for it.
-
- Member
- Posts: 216
- Joined: Thu. May. 22, 2008 2:24 pm
- Location: Acworth, NH
- Baseburners & Antiques: Glenwood No. 6 BH, Crawfords No.2 & 3 BH, Hub Heater 115 Circulator, Crawford Wood 19
- Other Heating: Oil
Well, I just called the dealer and he was kind enough to put a hold on the stove until I can come in tomorrow to look it over again. He says it belonged to a Cavendish Vermont dealer who had terminal cancer.
He's open to offers - yea !!
I live in a 1793 early Federal house with a back kitchen ell. We are currently only using the front half, but plan to restore the whole room, which will have cathedral ceilings, with ceiling girts and beams exposed. That will make the room HUGE (roughly 20 X 30) - hence my consideration of the Oak 40.
Still to big for that size space?
Chris
He's open to offers - yea !!
I live in a 1793 early Federal house with a back kitchen ell. We are currently only using the front half, but plan to restore the whole room, which will have cathedral ceilings, with ceiling girts and beams exposed. That will make the room HUGE (roughly 20 X 30) - hence my consideration of the Oak 40.
Still to big for that size space?
Chris
-
- Member
- Posts: 216
- Joined: Thu. May. 22, 2008 2:24 pm
- Location: Acworth, NH
- Baseburners & Antiques: Glenwood No. 6 BH, Crawfords No.2 & 3 BH, Hub Heater 115 Circulator, Crawford Wood 19
- Other Heating: Oil
No - It's a very compartmentalized house. Just to small doors into the main house.
Chris
Chris
- wsherrick
- Member
- Posts: 3744
- Joined: Wed. Jun. 18, 2008 6:04 am
- Location: High In The Poconos
- Hand Fed Coal Stove: Glenwood Base Heater, Crawford Base Heater
- Baseburners & Antiques: Crawford Base Heater, Glenwood, Stanley Argand
- Coal Size/Type: Chestnut, Stove Size
What I would think about, since the end of the room which Tee's into the rest of the house will be adjacent and open to both stories of the front part of the house, would be to put some nice, large vents into the upper story. This would allow for a large convection current to flow from all of the heat that will accumulate up in the vaulted ceiling into the upstairs and the cool air will return through the doors back into the kitchen from the bottom floor. The star case will work as a return air. You just have to keep the doors open.
-
- Member
- Posts: 216
- Joined: Thu. May. 22, 2008 2:24 pm
- Location: Acworth, NH
- Baseburners & Antiques: Glenwood No. 6 BH, Crawfords No.2 & 3 BH, Hub Heater 115 Circulator, Crawford Wood 19
- Other Heating: Oil
Hey - That's a great idea. We have no heat but electric radiators in the upstairs of the main house. Bringing the warm/hot air in the vaulted ceiling into the bedrooms might work!
Thanks for that great tip.
Chris
Thanks for that great tip.
Chris
Anyway, at that price don't miss that stove. Once you get it, you Have it and you can fix the house set up later while you admire the stove
BTW, if someone have a photo showing a Glenwood Oak 40, it would be great to see that stove. Thanks.
BTW, if someone have a photo showing a Glenwood Oak 40, it would be great to see that stove. Thanks.
- wsherrick
- Member
- Posts: 3744
- Joined: Wed. Jun. 18, 2008 6:04 am
- Location: High In The Poconos
- Hand Fed Coal Stove: Glenwood Base Heater, Crawford Base Heater
- Baseburners & Antiques: Crawford Base Heater, Glenwood, Stanley Argand
- Coal Size/Type: Chestnut, Stove Size
Ask and Ye shall receive. A Glenwood Oak No 40
Attachments
Thanks Will. Very nice stove, from the photo the stove doesn't look bigger than a No 6, is it really? How would you describe the Oak 40 if compared to a No 6?wsherrick wrote:Ask and Ye shall receive. A Glenwood Oak No 40
Thanks
-
- Member
- Posts: 216
- Joined: Thu. May. 22, 2008 2:24 pm
- Location: Acworth, NH
- Baseburners & Antiques: Glenwood No. 6 BH, Crawfords No.2 & 3 BH, Hub Heater 115 Circulator, Crawford Wood 19
- Other Heating: Oil
Here's a picture of a Glenwood Oak 40. I can't figure out how to upload more than one picture?