Fire Pot

Post Reply
 
Redonion
New Member
Posts: 5
Joined: Wed. Jun. 09, 2021 9:47 pm

Post by Redonion » Thu. Jun. 10, 2021 12:50 pm

New to stoves and I was wondering if this fire pot or refractory liner look ok? I had the grates removed for picture.

Attachments

78E4351B-5D29-48DC-9C57-440CF85E274C.jpeg
.JPEG | 799KB | 78E4351B-5D29-48DC-9C57-440CF85E274C.jpeg

 
franco b
Site Moderator
Posts: 11065
Joined: Wed. Nov. 05, 2008 5:11 pm
Location: Kent CT
Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
Baseburners & Antiques: Glenwood Modern Oak 114
Coal Size/Type: nut and pea

Post by franco b » Thu. Jun. 10, 2021 7:40 pm

Looks OK. Appears to be a suspended fire pot.

 
Redonion
New Member
Posts: 5
Joined: Wed. Jun. 09, 2021 9:47 pm

Post by Redonion » Thu. Jun. 10, 2021 8:19 pm

It’s an “Our Glenwood “ 109.


 
franco b
Site Moderator
Posts: 11065
Joined: Wed. Nov. 05, 2008 5:11 pm
Location: Kent CT
Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
Baseburners & Antiques: Glenwood Modern Oak 114
Coal Size/Type: nut and pea

Post by franco b » Fri. Jun. 11, 2021 8:51 am

Redonion wrote:
Thu. Jun. 10, 2021 8:19 pm
It’s an “Our Glenwood “ 109.
There is supposed to be a grill surrounding the upper part of the fire pot to prevent coal from falling down around the fire pot. Without it you will have to be more careful while loading.

 
Redonion
New Member
Posts: 5
Joined: Wed. Jun. 09, 2021 9:47 pm

Post by Redonion » Fri. Jun. 11, 2021 10:30 am

I do have the upper grill. I took it out for the picture.

Post Reply

Return to “Antiques, Baseburners, Kitchen Stoves, Restorations & Modern Reproductions”