Clarion 115

User avatar
mntbugy
Member
Posts: 240
Joined: Fri. Dec. 23, 2016 2:36 pm
Hand Fed Coal Stove: D S 1500, Warm Moring 400
Baseburners & Antiques: Modern Glenwood Oak 114, Clarion 115
Coal Size/Type: stove and nut and some bit
Other Heating: Propain
Location: clearfield,pa

Post By: mntbugy » Fri. Feb. 16, 2018 8:51 pm

The Clarion has been carrying it's own weight down to 0 oat. Then the WM has to help. Had a small puff back this morning(swoosh).
Tried to wake it up to fast. First attempt a real low idle. Had it at
151 barrel top, stack 108 for 24 hrs. Should be able to get lower
while still in base mode. Still sipping coal at 24% overdrive, 30%
is to much.


User avatar
mntbugy
Member
Posts: 240
Joined: Fri. Dec. 23, 2016 2:36 pm
Hand Fed Coal Stove: D S 1500, Warm Moring 400
Baseburners & Antiques: Modern Glenwood Oak 114, Clarion 115
Coal Size/Type: stove and nut and some bit
Other Heating: Propain
Location: clearfield,pa

Post By: mntbugy » Sun. Apr. 15, 2018 7:52 pm

Left the Clarion burn out yesterday, to clean out what ever was in base chamber. It burned 63 hours on about 50 lbs of black rocks.
At 200 deg in cruise mode, needed a little heat in the mornings.

Found around 1/8 to 3/16 inch ash in base chamber, a little deeper under back pipe. Less than I was expecting.
Next time to do a clean out I'm not going to shut it down. Just stick crevis tool from shop vac in, 3 minutes later done.

User avatar
joeq
Member
Posts: 4745
Joined: Sat. Feb. 11, 2012 11:53 am
Hand Fed Coal Stove: G111, Southard Robertson
Stove/Furnace Make: Thermopride
Stove/Furnace Model: oil fired
Location: Northern CT

Post By: joeq » Sun. Apr. 15, 2018 8:17 pm

63 hrs MB? Did you add anything to it, or shake a little ash out of it once or twice? Sounds like you've got it tuned in nicely. Will you need to re-fire it again this season? Mine came back to life a couple weeks ago, and am milking it along another day or two. Then I'll be out...again...for the 3rd time these past few weeks. It was 70° yesterday, and today, back down to 40. (highs).

User avatar
mntbugy
Member
Posts: 240
Joined: Fri. Dec. 23, 2016 2:36 pm
Hand Fed Coal Stove: D S 1500, Warm Moring 400
Baseburners & Antiques: Modern Glenwood Oak 114, Clarion 115
Coal Size/Type: stove and nut and some bit
Other Heating: Propain
Location: clearfield,pa

Post By: mntbugy » Sun. Apr. 15, 2018 8:23 pm

Joe, just floss and shake at 12 hrs. Going to have fire 6 more weeks at least.

User avatar
joeq
Member
Posts: 4745
Joined: Sat. Feb. 11, 2012 11:53 am
Hand Fed Coal Stove: G111, Southard Robertson
Stove/Furnace Make: Thermopride
Stove/Furnace Model: oil fired
Location: Northern CT

Post By: joeq » Sun. Apr. 15, 2018 10:40 pm

Enjoy
("you need to enter at least 10 characters, 'cause your message is too short.")
Hope this helps :lol:

User avatar
Sunny Boy
Member
Posts: 14912
Joined: Mon. Nov. 11, 2013 1:40 pm
Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
Coal Size/Type: Nuts !
Other Heating: Oil &electric plenum furnace
Location: Central NY

Post By: Sunny Boy » Sun. Apr. 15, 2018 11:00 pm

63 hours - very impressive run MB !

Paul

User avatar
Pauliewog
Member
Posts: 1311
Joined: Mon. Dec. 02, 2013 12:15 am
Hot Air Coal Stoker Furnace: Alaska 140 Dual Paddle Feed
Baseburners & Antiques: Fame Rosemont #20, Home Stove Works #25, Glenwood #6, Happy Thought Oak, Merry Bride #214, Sunnyside, Worlds Argand #114, New Golden Sun , & About 30 others.
Coal Size/Type: Stove, Chesnut, Pea, Rice / Anthracite
Location: Pittston, Pennsylvania

Post By: Pauliewog » Mon. Apr. 16, 2018 6:56 pm

mntbugy wrote:
Sun. Apr. 15, 2018 8:23 pm
Joe, just floss and shake at 12 hrs. Going to have fire 6 more weeks at least.
Nice job Artie ! I hope you're right on the 6 weeks, I just picked up 30 bags today just in case.

Paulie

KingCoal
Member
Posts: 3481
Joined: Wed. Apr. 03, 2013 1:24 pm
Hand Fed Coal Stove: 2-Locke Warm Morning #120, 1-Locke Warm Morning #524B, 1 - custom Locke Warm Morning Extended barrel Base Heater Double Heater
Baseburners & Antiques: 2014 DTS C17 Base Burner
Coal Size/Type: Nut Anth.
Other Heating: none
Location: Elkhart county, IN.

Post By: KingCoal » Mon. Apr. 16, 2018 7:51 pm

ACK, are you kidding me ? i don't want to burn clear thru May !


User avatar
mntbugy
Member
Posts: 240
Joined: Fri. Dec. 23, 2016 2:36 pm
Hand Fed Coal Stove: D S 1500, Warm Moring 400
Baseburners & Antiques: Modern Glenwood Oak 114, Clarion 115
Coal Size/Type: stove and nut and some bit
Other Heating: Propain
Location: clearfield,pa

Post By: mntbugy » Sun. May. 27, 2018 7:01 pm

The heating season ended somewhere between midnight and 5:30 am this morning .

Total for 2017-18 season 9580lbs, ish.

Since heating season is over, restoration season is in high gear.
These two are mine, another on it way soon.

One more is not mine.
Attachments
stove pics 050.jpg
Germer Home Airblast 62
stove pics 049.jpg
Has 14 inch fire pot
stove pics 052.jpg
Germer Radiant Air Blast 626
stove pics 055.jpg
Has 16 inch fire pot

User avatar
Sunny Boy
Member
Posts: 14912
Joined: Mon. Nov. 11, 2013 1:40 pm
Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
Coal Size/Type: Nuts !
Other Heating: Oil &electric plenum furnace
Location: Central NY

Post By: Sunny Boy » Sun. May. 27, 2018 10:48 pm

Those'll be some good projects.

Are they both bit coal stoves ?

Paul

User avatar
joeq
Member
Posts: 4745
Joined: Sat. Feb. 11, 2012 11:53 am
Hand Fed Coal Stove: G111, Southard Robertson
Stove/Furnace Make: Thermopride
Stove/Furnace Model: oil fired
Location: Northern CT

Post By: joeq » Sun. May. 27, 2018 11:41 pm

That 626 should put out some nice heat. Do you have a recipient room for the double heater? What kind of grating is in it? And how do you shake it down? Congrats on being one of, if not the longest to burn this season.

User avatar
mntbugy
Member
Posts: 240
Joined: Fri. Dec. 23, 2016 2:36 pm
Hand Fed Coal Stove: D S 1500, Warm Moring 400
Baseburners & Antiques: Modern Glenwood Oak 114, Clarion 115
Coal Size/Type: stove and nut and some bit
Other Heating: Propain
Location: clearfield,pa

Post By: mntbugy » Mon. May. 28, 2018 7:01 am

Sunny Boy wrote:
Sun. May. 27, 2018 10:48 pm
Those'll be some good projects.

Are they both bit coal stoves ?

Paul
Yes. Bit stoves.

User avatar
mntbugy
Member
Posts: 240
Joined: Fri. Dec. 23, 2016 2:36 pm
Hand Fed Coal Stove: D S 1500, Warm Moring 400
Baseburners & Antiques: Modern Glenwood Oak 114, Clarion 115
Coal Size/Type: stove and nut and some bit
Other Heating: Propain
Location: clearfield,pa

Post By: mntbugy » Mon. May. 28, 2018 7:08 am

joeq wrote:
Sun. May. 27, 2018 11:41 pm
That 626 should put out some nice heat. Do you have a recipient room for the double heater? What kind of grating is in it? And how do you shake it down? Congrats on being one of, if not the longest to burn this season.
Double heater will get piped to top of cellar steps.

Three piece shaker grate. Draw center, grate, and outer ring thingy.


Freetown Fred gots fire yet. Plus the water people.

User avatar
freetown fred
Member
Posts: 23199
Joined: Thu. Dec. 31, 2009 12:33 pm
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut
Location: Freetown,NY 13803

Post By: freetown fred » Mon. May. 28, 2018 8:19 am

Lovin the stoves M, the HITZER has retired for the summer--took 3 days for the old girl to give it up.

KingCoal
Member
Posts: 3481
Joined: Wed. Apr. 03, 2013 1:24 pm
Hand Fed Coal Stove: 2-Locke Warm Morning #120, 1-Locke Warm Morning #524B, 1 - custom Locke Warm Morning Extended barrel Base Heater Double Heater
Baseburners & Antiques: 2014 DTS C17 Base Burner
Coal Size/Type: Nut Anth.
Other Heating: none
Location: Elkhart county, IN.

Post By: KingCoal » Tue. May. 29, 2018 6:46 pm

WOW, now i see why you said you were watching those estate sales so close.

nice haul :clap:


Post Reply

Return to “Antiques, Baseburners, Kitchen Stoves, Restorations & Modern Reproductions”