Help locating an ash door handle?

Post Reply
 
vanguy
New Member
Posts: 16
Joined: Thu. Jul. 02, 2020 8:06 pm
Hand Fed Coal Stove: Warm Morning 617A
Coal Size/Type: bagged nut anthracite, bulk lump and stove bituminous
Other Heating: Natural Gas Furnace

Post by vanguy » Sat. Feb. 05, 2022 9:38 pm

I bought a Warm Morning 617A today. Long story short: The seller "helped" me break the ash door handle clean off of the stove. Where could I find a replacement?

 
User avatar
Hambden Bob
Member
Posts: 8603
Joined: Mon. Jan. 04, 2010 10:54 am
Location: Hambden Twp. Geauga County,Ohio
Hot Air Coal Stoker Stove: Harman 1998 Magnum Stoker
Hand Fed Coal Stove: Blower Model Coal Chubby 1982-Serial#0097
Coal Size/Type: Rice-A-Roni ! / Nut
Other Heating: Pro-Pain Forced Air

Post by Hambden Bob » Sun. Feb. 06, 2022 3:23 am

Welcome,Van! Hang In There! Perhaps one of Our Fine Folks can help You.

 
vanguy
New Member
Posts: 16
Joined: Thu. Jul. 02, 2020 8:06 pm
Hand Fed Coal Stove: Warm Morning 617A
Coal Size/Type: bagged nut anthracite, bulk lump and stove bituminous
Other Heating: Natural Gas Furnace

Post by vanguy » Sun. Feb. 06, 2022 9:54 am

I know there's one out there. I meant to take photos of the new (to me) stove but it was too dark by the time we got it up on the truck.


 
User avatar
freetown fred
Member
Posts: 30324
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Sun. Feb. 06, 2022 11:01 am

Good--take em now!! :)

 
vanguy
New Member
Posts: 16
Joined: Thu. Jul. 02, 2020 8:06 pm
Hand Fed Coal Stove: Warm Morning 617A
Coal Size/Type: bagged nut anthracite, bulk lump and stove bituminous
Other Heating: Natural Gas Furnace

Post by vanguy » Fri. Feb. 11, 2022 1:47 pm

Can anyone tell me what this is for? It's on the side of a Warm Morning Model 422 heater.

Attachments

WM Knob.jpg
.JPG | 85.1KB | WM Knob.jpg

 
User avatar
freetown fred
Member
Posts: 30324
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Fri. Feb. 11, 2022 3:59 pm

Gotta be some kind of draft control--can ya see it inside what moves when ya play with it.?


 
vanguy
New Member
Posts: 16
Joined: Thu. Jul. 02, 2020 8:06 pm
Hand Fed Coal Stove: Warm Morning 617A
Coal Size/Type: bagged nut anthracite, bulk lump and stove bituminous
Other Heating: Natural Gas Furnace

Post by vanguy » Sat. Feb. 12, 2022 2:10 pm

Well....nobody seemed to have a handle or know where to get one...so I improvised! JB Weld really IS handy stuff!! I got started on the disassembly and painting before I remembered to take good "before" photos. Here is what I have: Warm Morning 617A

Attachments

IMG_20220211_164258951.jpg
.JPG | 394.2KB | IMG_20220211_164258951.jpg
IMG_20220211_164348506.jpg
.JPG | 561.3KB | IMG_20220211_164348506.jpg
IMG_20220205_163505091.jpg
.JPG | 387.5KB | IMG_20220205_163505091.jpg
IMG_20220211_164330203.jpg
.JPG | 286.4KB | IMG_20220211_164330203.jpg
IMG_20220211_164309067.jpg
.JPG | 412.9KB | IMG_20220211_164309067.jpg
IMG_20220211_164250001.jpg
.JPG | 577.4KB | IMG_20220211_164250001.jpg
IMG_20220211_164341606.jpg
.JPG | 172.4KB | IMG_20220211_164341606.jpg

 
User avatar
freetown fred
Member
Posts: 30324
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Sat. Feb. 12, 2022 4:55 pm

Nice on the pix V--yep--JB-weld & duct-tape are a mans best friend right after his dog!!! :) She's lookin REAL good.

 
vanguy
New Member
Posts: 16
Joined: Thu. Jul. 02, 2020 8:06 pm
Hand Fed Coal Stove: Warm Morning 617A
Coal Size/Type: bagged nut anthracite, bulk lump and stove bituminous
Other Heating: Natural Gas Furnace

Post by vanguy » Fri. Feb. 18, 2022 1:51 am

Well...she's in! Haven't burned any coal yet but am burning a wood fire tonight to cure the paint job. House is SMOKY!! I hate that "new paint" smell! Attached are some photos. I moved the Jotul 118 out by myself and brought the Warm Morning in with a dolly. The Jotul 8 in the bed of the truck is one of my next projects....

Attachments

IMG_20220215_162529016.jpg
.JPG | 567.3KB | IMG_20220215_162529016.jpg
IMG_20220217_181709841.jpg
.JPG | 244.8KB | IMG_20220217_181709841.jpg
IMG_20220216_222023136.jpg
.JPG | 319.1KB | IMG_20220216_222023136.jpg
IMG_20220217_212757343.jpg
.JPG | 110.6KB | IMG_20220217_212757343.jpg
IMG_20220217_212652805.jpg
.JPG | 266.7KB | IMG_20220217_212652805.jpg

 
User avatar
carlherrnstein
Member
Posts: 1547
Joined: Tue. Feb. 07, 2012 8:49 am
Location: Clarksburg, ohio
Hot Air Coal Stoker Stove: combustioneer model 77B
Coal Size/Type: pea stoker/Ohio bituminous

Post by carlherrnstein » Sat. Oct. 22, 2022 4:44 pm

Looks good, if that JB stuff fails braze it with the white flux coated brazing rod from TSC or your favorite store. I have fixed a lot of castings with that stuff it's about as strong as cast iron at room temperature. It does take a oxyfuel torch a plumbers torch is not gonna do it.

Post Reply

Return to “Hand Fired Coal Boilers & Hot Air Furnaces/Stoves Using Bituminous”