Hotblast Year 7(?)

Post Reply
 
larryfoster
Member
Posts: 1348
Joined: Fri. Nov. 21, 2014 1:02 am
Location: Armstrong County, Pa.
Hand Fed Coal Stove: Warm Morning 617-B
Hand Fed Coal Furnace: Hot Blast 1557M
Coal Size/Type: Bituminous nut (me and the coal)
Other Heating: Propane Kerosene

Post by larryfoster » Thu. Feb. 03, 2022 7:01 am

Belated annual greetings!
Hope all are warm and well.

My coal burning season has been different and "interesting"

I didn't fire up my stove until around New Year's.
Had someone do some remodeling which I had to re-do the whole project and had bare drywall that I wanted painted before I added soot.

Then, I found myself having difficulty going to the basement to fire the stove and just got out of hospital with pneumonia.

Coal firing duties are entrusted to my 30 year old son.
Great kid but, occasionally, bone-headed.
(Probably got that from his mom.)

Yesterday, he tells me he needs to replace some fire brick.
He's done that before.
Picked some up at Central Tractor and should be good.

Last night he shows me a big crack in the front liner.

My manual for the 1557 shows different numbers for the front and rear liner but they look the same
I'll check with US Stove a little later this morning.
The rear liner number is a lot easier to find.

I'm tempted to put the old liner back in, temporarily.

I'll post an interesting coal story later.

Thanks for always listening to my rambles

 
User avatar
Lightning
Site Moderator
Posts: 14652
Joined: Wed. Nov. 16, 2011 9:51 am
Location: Olean, NY
Stoker Coal Boiler: Modified AA 130
Coal Size/Type: Pea Size - Anthracite

Post by Lightning » Thu. Feb. 03, 2022 6:17 pm

Nice to see you around Larry. The front and rear liners on my 1537 were very different, not sure how different yours are.

 
User avatar
warminmn
Member
Posts: 8075
Joined: Tue. Feb. 08, 2011 5:59 pm
Location: Land of 11,842 lakes
Hand Fed Coal Stove: Chubby Junior, Efel Nestor Martin, Riteway 37
Coal Size/Type: nut and stove anthracite, lignite
Other Heating: Wood and wear a wool shirt

Post by warminmn » Thu. Feb. 03, 2022 6:25 pm

Better late than never (posting). Good luck burning this year now that your almost back at it.


 
User avatar
Lightning
Site Moderator
Posts: 14652
Joined: Wed. Nov. 16, 2011 9:51 am
Location: Olean, NY
Stoker Coal Boiler: Modified AA 130
Coal Size/Type: Pea Size - Anthracite

Post by Lightning » Thu. Feb. 03, 2022 7:08 pm

larryfoster wrote:
Thu. Feb. 03, 2022 7:01 am
Great kid but, occasionally, bone-headed.
(Probably got that from his mom.)
I have to admit.. that is some very clever humor :lol: :clap:

 
larryfoster
Member
Posts: 1348
Joined: Fri. Nov. 21, 2014 1:02 am
Location: Armstrong County, Pa.
Hand Fed Coal Stove: Warm Morning 617-B
Hand Fed Coal Furnace: Hot Blast 1557M
Coal Size/Type: Bituminous nut (me and the coal)
Other Heating: Propane Kerosene

Post by larryfoster » Thu. Feb. 03, 2022 7:27 pm

I had some urgency after letting myself run out of propane just before Christmas and a $900 bill

 
larryfoster
Member
Posts: 1348
Joined: Fri. Nov. 21, 2014 1:02 am
Location: Armstrong County, Pa.
Hand Fed Coal Stove: Warm Morning 617-B
Hand Fed Coal Furnace: Hot Blast 1557M
Coal Size/Type: Bituminous nut (me and the coal)
Other Heating: Propane Kerosene

Post by larryfoster » Thu. Feb. 03, 2022 7:29 pm

Lightning wrote:
Thu. Feb. 03, 2022 6:17 pm
Nice to see you around Larry. The front and rear liners on my 1537 were very different, not sure how different yours are.
Got hold of US Stove his morning.
Front liner was @ $130.00
Rear liners were half


 
User avatar
BigBarney
Member
Posts: 1805
Joined: Wed. Feb. 08, 2006 2:48 pm

Post by BigBarney » Thu. Feb. 03, 2022 10:17 pm

Welcome back Larry..

Stay well...

Ready for new adventures...

BigBarney

 
larryfoster
Member
Posts: 1348
Joined: Fri. Nov. 21, 2014 1:02 am
Location: Armstrong County, Pa.
Hand Fed Coal Stove: Warm Morning 617-B
Hand Fed Coal Furnace: Hot Blast 1557M
Coal Size/Type: Bituminous nut (me and the coal)
Other Heating: Propane Kerosene

Post by larryfoster » Mon. Nov. 21, 2022 12:06 am

BigBarney wrote:
Thu. Feb. 03, 2022 10:17 pm
Welcome back Larry..

Stay well...

Ready for new adventures...

BigBarney
Already in another year, BigBarney

Post Reply

Return to “Hand Fired Coal Boilers & Hot Air Furnaces/Stoves Using Bituminous”