Warm Morning safe install in garage

 
larryfoster
Member
Posts: 1312
Joined: Fri. Nov. 21, 2014 1:02 am
Location: Armstrong County, Pa.
Hand Fed Coal Stove: Warm Morning 617-B
Hand Fed Coal Furnace: Hot Blast 1557M
Coal Size/Type: Bituminous nut (me and the coal)
Other Heating: Propane Kerosene

Post by larryfoster » Mon. Oct. 02, 2017 6:50 am

Google helped me out.
:)

I found this and it seems to answer my questions.
viewtopic.php?f=55&t=39013&sid=231e672b ... a&start=60

I do need to check the bricks out.
I hope they're good because they're very expensive!!!

What can I use for "fireproof spacers"?

Also, can one still buy asbestos millboard or what can I use for a backer?
Last edited by larryfoster on Mon. Oct. 02, 2017 7:01 am, edited 1 time in total.

Advertise on Coalpail.com

 
User avatar
freetown fred
Member
Posts: 24497
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Mon. Oct. 02, 2017 6:56 am

TSC--porcelain fence insulators

 
larryfoster
Member
Posts: 1312
Joined: Fri. Nov. 21, 2014 1:02 am
Location: Armstrong County, Pa.
Hand Fed Coal Stove: Warm Morning 617-B
Hand Fed Coal Furnace: Hot Blast 1557M
Coal Size/Type: Bituminous nut (me and the coal)
Other Heating: Propane Kerosene

Post by larryfoster » Mon. Oct. 02, 2017 7:02 am

TSC--porcelain fence insulators
Thanks, Fred.
I got lots of those laying around

 
KingCoal
Member
Posts: 3910
Joined: Wed. Apr. 03, 2013 1:24 pm
Location: Elkhart county, IN.
Hand Fed Coal Stove: 2-Locke Warm Morning #120, 1-Locke Warm Morning #524B, 1 - custom Locke Warm Morning Extended barrel Base Heater Double Heater
Baseburners & Antiques: 2014 DTS C17 Base Burner
Coal Size/Type: Nut Anth.
Other Heating: none

Post by KingCoal » Mon. Oct. 02, 2017 11:44 am

can you get a piece of 6" single wall stove pipe and use it like this pic to go from oval to round ?

download/file.php?id=81671

download/file.php?id=81673

you would then just need to push the triple wall up some to make the connection from single round into the triple wall.

 
larryfoster
Member
Posts: 1312
Joined: Fri. Nov. 21, 2014 1:02 am
Location: Armstrong County, Pa.
Hand Fed Coal Stove: Warm Morning 617-B
Hand Fed Coal Furnace: Hot Blast 1557M
Coal Size/Type: Bituminous nut (me and the coal)
Other Heating: Propane Kerosene

Post by larryfoster » Mon. Oct. 02, 2017 1:03 pm

Thanks, King Coal.
I bet I can.
Do you think I could just go through the wood sidewall with the triple wall?

 
KingCoal
Member
Posts: 3910
Joined: Wed. Apr. 03, 2013 1:24 pm
Location: Elkhart county, IN.
Hand Fed Coal Stove: 2-Locke Warm Morning #120, 1-Locke Warm Morning #524B, 1 - custom Locke Warm Morning Extended barrel Base Heater Double Heater
Baseburners & Antiques: 2014 DTS C17 Base Burner
Coal Size/Type: Nut Anth.
Other Heating: none

Post by KingCoal » Mon. Oct. 02, 2017 1:16 pm

it depends, do you have a couple triple wall elbows to turn the pipe toward the outside then up ?

you will also have to figure out how to support the weight of the triple both inside and out

 
larryfoster
Member
Posts: 1312
Joined: Fri. Nov. 21, 2014 1:02 am
Location: Armstrong County, Pa.
Hand Fed Coal Stove: Warm Morning 617-B
Hand Fed Coal Furnace: Hot Blast 1557M
Coal Size/Type: Bituminous nut (me and the coal)
Other Heating: Propane Kerosene

Post by larryfoster » Mon. Oct. 02, 2017 9:05 pm

I would have just run single wall from the stove to the triple wall.
Unless there is something made for it, I would redneck engineer a hanger for the triple wall

 
larryfoster
Member
Posts: 1312
Joined: Fri. Nov. 21, 2014 1:02 am
Location: Armstrong County, Pa.
Hand Fed Coal Stove: Warm Morning 617-B
Hand Fed Coal Furnace: Hot Blast 1557M
Coal Size/Type: Bituminous nut (me and the coal)
Other Heating: Propane Kerosene

Post by larryfoster » Tue. Oct. 03, 2017 10:49 am

Also, can one still buy asbestos millboard or what can I use for a backer?
I found this at Lowe's:
https://www.lowes.com/pd/IMPERIAL-Black ... rd/3818607
Imperial black stove board.

Also, I haven't checked my fire bricks yet but was looking around in case I needed some.
I found 2 places and they're @ $100.
It seems like they are saying that is per brick.
Would that be correct?

Advertise on Coalpail.com

 
User avatar
hotblast1357
Member
Posts: 4829
Joined: Mon. Mar. 10, 2014 10:06 pm
Location: Peasleeville NY
Stoker Coal Boiler: 1984 Eshland S260 coal gun
Coal Size/Type: Lehigh anthracite pea
Other Heating: oil furnace

Post by hotblast1357 » Tue. Oct. 03, 2017 11:23 am

Haha gosh no!

Attachments

B5193F37-82FA-4A1A-89E5-4726225F4F89.png
.PNG | 179.7KB | B5193F37-82FA-4A1A-89E5-4726225F4F89.png

 
larryfoster
Member
Posts: 1312
Joined: Fri. Nov. 21, 2014 1:02 am
Location: Armstrong County, Pa.
Hand Fed Coal Stove: Warm Morning 617-B
Hand Fed Coal Furnace: Hot Blast 1557M
Coal Size/Type: Bituminous nut (me and the coal)
Other Heating: Propane Kerosene

Post by larryfoster » Tue. Oct. 03, 2017 12:33 pm

Thanks, Hotblast 1357.

Those look like regular old fire bricks.
The ones inside my WM seem thicker and some aren't rectangular

Here's one I found

http://www.woodmanspartsplus.com/65649/ ... brick.html

 
User avatar
windyhill4.2
Member
Posts: 6067
Joined: Fri. Nov. 22, 2013 2:17 pm
Location: Jonestown,Pa.17038
Stoker Coal Boiler: 1960 EFM520 installed in truck box
Hand Fed Coal Stove: Crane 404 with variable blower
Coal Size/Type: 404-nut, 520 rice ,anthracite for both

Post by windyhill4.2 » Tue. Oct. 03, 2017 8:48 pm

I think it was a forum member that threw out the caution about buying those Warm Morning stoves...... MUST check the condition of the bricks because of the very high cost of replacing them.

 
larryfoster
Member
Posts: 1312
Joined: Fri. Nov. 21, 2014 1:02 am
Location: Armstrong County, Pa.
Hand Fed Coal Stove: Warm Morning 617-B
Hand Fed Coal Furnace: Hot Blast 1557M
Coal Size/Type: Bituminous nut (me and the coal)
Other Heating: Propane Kerosene

Post by larryfoster » Tue. Oct. 03, 2017 9:00 pm

I have had this one for years.
More accurately, my parents had it for years.

So, no acquisition cost.

I'll be checking the bricks real soon.
Although it's outrageous, I might pay $88 for a set but not just one brick in the link.

I'm waiting for clarification from the seller now

 
KingCoal
Member
Posts: 3910
Joined: Wed. Apr. 03, 2013 1:24 pm
Location: Elkhart county, IN.
Hand Fed Coal Stove: 2-Locke Warm Morning #120, 1-Locke Warm Morning #524B, 1 - custom Locke Warm Morning Extended barrel Base Heater Double Heater
Baseburners & Antiques: 2014 DTS C17 Base Burner
Coal Size/Type: Nut Anth.
Other Heating: none

Post by KingCoal » Wed. Oct. 04, 2017 7:43 am

this is the link to the page for the 2 flat bricks you need for the 617. you need WM9885R and WM9884R

i had a link for the corner bricks too but that source no longer has them

there was a recent thread on this type stove where the owner made a full set of replacement bricks including corners from standard flat bricks, it was an awesome job.

i'll try to find it on forum for you.

steve

 
KingCoal
Member
Posts: 3910
Joined: Wed. Apr. 03, 2013 1:24 pm
Location: Elkhart county, IN.
Hand Fed Coal Stove: 2-Locke Warm Morning #120, 1-Locke Warm Morning #524B, 1 - custom Locke Warm Morning Extended barrel Base Heater Double Heater
Baseburners & Antiques: 2014 DTS C17 Base Burner
Coal Size/Type: Nut Anth.
Other Heating: none

Post by KingCoal » Wed. Oct. 04, 2017 7:45 am

sorry forgot to post the link

http://www.woodmanspartsplus.com/Parts/ ... %20Morning

if you go looking the corner brick you need is WM5289R

 
larryfoster
Member
Posts: 1312
Joined: Fri. Nov. 21, 2014 1:02 am
Location: Armstrong County, Pa.
Hand Fed Coal Stove: Warm Morning 617-B
Hand Fed Coal Furnace: Hot Blast 1557M
Coal Size/Type: Bituminous nut (me and the coal)
Other Heating: Propane Kerosene

Post by larryfoster » Wed. Oct. 04, 2017 8:18 am

Thanks, King Coal.

I'm heading to the basement to look at the bricks this morning.

I would be very pleasantly surprised if it didn't need some.

My dad has been gone 30 years and he used the stove to burn waste paper.
He told me not to burn it too hot.

I don't know if that is because of the bricks or the chimney.
It was hooked up to the same flue that I have my coal furnace hooked into before I lined it

Edit:

I missed your post from last evening, Steve.
there was a recent thread on this type stove where the owner made a full set of replacement bricks including corners from standard flat bricks, it was an awesome job.

i'll try to find it on forum for you.
That would be awesome.
I'll look too.

Found it.

viewtopic.php?f=55&t=38374&start=30

Advertise on Coalpail.com

Post Reply

Return to “Hand Fired Coal Boilers & Hot Air Furnaces/Stoves Using Bituminous”