NTM Warm Morning 400 in Upstate NY
- Dremel
- Member
- Posts: 43
- Joined: Sat. Jan. 28, 2017 2:18 am
- Location: Hudson Valley NY
- Stoker Coal Boiler: William Myers
- Hand Fed Coal Stove: warm morning 400
Hi folks!
Been lurking a few weeks educating myself on coal burning. I'm new to coal burning and I thought my wood burning experience was worth something but not really huh!
Picked up a WM 400 in really good shape off CL for $75. A few cracks in the brick but not a big deal. The flutes and the rest of the lining have crisp low milage edges and grates have lots of life. Came with the fan but not shaker handle.
Great cache of experience here on using this stove so I'm up and running just need some fine tuning, adjust the bimetal stat, etc. Way happy with the results, I hate winter and spent 20 yrs in Phoenix,AZ where heating your home happens all by itself.
What I am in need of now is coal. I am between Poughkeepsie and Albany. Best place I've found so far is Cornwall, NY for bulk buying. Any other Apple Knockers have suggestions?
Also, what's a good size coal to burn in the WM400?
Thanks !
Been lurking a few weeks educating myself on coal burning. I'm new to coal burning and I thought my wood burning experience was worth something but not really huh!
Picked up a WM 400 in really good shape off CL for $75. A few cracks in the brick but not a big deal. The flutes and the rest of the lining have crisp low milage edges and grates have lots of life. Came with the fan but not shaker handle.
Great cache of experience here on using this stove so I'm up and running just need some fine tuning, adjust the bimetal stat, etc. Way happy with the results, I hate winter and spent 20 yrs in Phoenix,AZ where heating your home happens all by itself.
What I am in need of now is coal. I am between Poughkeepsie and Albany. Best place I've found so far is Cornwall, NY for bulk buying. Any other Apple Knockers have suggestions?
Also, what's a good size coal to burn in the WM400?
Thanks !
Attachments
Last edited by Dremel on Mon. Feb. 06, 2017 12:29 pm, edited 1 time in total.
- Dremel
- Member
- Posts: 43
- Joined: Sat. Jan. 28, 2017 2:18 am
- Location: Hudson Valley NY
- Stoker Coal Boiler: William Myers
- Hand Fed Coal Stove: warm morning 400
I was thinking Anthracite coal to avoid any kind of sulfur stink or perhaps a mix. Whatever I can find that is cheap and I don't have to but and store 10 tons right now.
I have a Buderus hand fired boiler that I want to put in service too. Been splitting wood long enough !
Thanks,
Bill
I have a Buderus hand fired boiler that I want to put in service too. Been splitting wood long enough !
Thanks,
Bill
- SWPaDon
- Member
- Posts: 9857
- Joined: Sun. Nov. 24, 2013 12:05 pm
- Location: Southwest Pa.
- Hand Fed Coal Furnace: Clayton 1600M
- Coal Size/Type: Bituminous
- Other Heating: Oil furnace
Had to make sure of which coal you were using. I'm not sure you could even get Bituminous in your area, if you could it would probably be the same or more in price.Dremel wrote:Anthracite for $227 / ton. I don't think it mattered what size it was.
Others that have mixed the two coals didn't have very good results as the two coals have very different burn characteristics.
Member King Coal is the resident Warm Morning Guru, I'll send him a PM about this thread.
-
- Member
- Posts: 1503
- Joined: Mon. Dec. 16, 2013 1:48 pm
- Location: somewhere high in the catskill mountains
- Hand Fed Coal Boiler: harman sf 160
- Coal Size/Type: Nut
- Other Heating: wood parlor stove
Dremel, if you are between Poughkeepsie & Albany you cant be very far from me. I live about 6 miles off exit 20 NY T-Way. Bit doesn't exist here, however Cornwall seems to get high praises. There is also a member on here that lives in Greenville, NY who does bulk delivery believe he goes by justify003. I'll search & confirm. Other than that I heard there was a bulk dealer in Albany, but don't know the name. I get bagged Blasckak from a dealer in Catskill for $ 350 ton. Welcome & good luck.
Jim
Jim
-
- Member
- Posts: 1503
- Joined: Mon. Dec. 16, 2013 1:48 pm
- Location: somewhere high in the catskill mountains
- Hand Fed Coal Boiler: harman sf 160
- Coal Size/Type: Nut
- Other Heating: wood parlor stove
Dremel , try Justin Arp 518-965-3301. If this is not correct, someone on here will straighten it out.
JIm
JIm
- Dremel
- Member
- Posts: 43
- Joined: Sat. Jan. 28, 2017 2:18 am
- Location: Hudson Valley NY
- Stoker Coal Boiler: William Myers
- Hand Fed Coal Stove: warm morning 400
He does coal too? I've bought pellets from him before. Didnt ask about coal.coalder wrote:Dremel , try Justin Arp 518-965-3301. If this is not correct, someone on here will straighten it out.
JIm
-
- Member
- Posts: 1503
- Joined: Mon. Dec. 16, 2013 1:48 pm
- Location: somewhere high in the catskill mountains
- Hand Fed Coal Boiler: harman sf 160
- Coal Size/Type: Nut
- Other Heating: wood parlor stove
Dremel, I believe you are talking about Justin Slater, of Slater's pellets in Cairo, NY. This is another Justin in Greenville, NY who delivers bulk coal. Kindly PM me as I think we live real close!!
Thx
Jim
Thx
Jim
- Dremel
- Member
- Posts: 43
- Joined: Sat. Jan. 28, 2017 2:18 am
- Location: Hudson Valley NY
- Stoker Coal Boiler: William Myers
- Hand Fed Coal Stove: warm morning 400
Check your inbox.coalder wrote:Dremel, I believe you are talking about Justin Slater, of Slater's pellets in Cairo, NY. This is another Justin in Greenville, NY who delivers bulk coal. Kindly PM me as I think we live real close!!
Thx
Jim
- Homesteader
- Member
- Posts: 299
- Joined: Sat. Aug. 13, 2016 4:24 pm
- Location: Goshen, CT.
- Hand Fed Coal Stove: Harman Mark II
- Coal Size/Type: Nut, Stove
- Other Heating: H.B. Smith oil fired boiler
I bought a ten ton load from him this summer that he brought up from Lehigh Anthracite. It worked out very good for me. Here is the thread that gives the information:coalder wrote:Dremel , try Justin Arp 518-965-3301. If this is not correct, someone on here will straighten it out.
JIm
Coal Delivery 10Tons Bulk Anywhere in Northeast
J.L.
- coalturkey
- Member
- Posts: 80
- Joined: Sun. Nov. 27, 2011 1:38 am
- Location: Winchester, VA
- Hand Fed Coal Stove: Warm Morning 400
- Baseburners & Antiques: Oakland #6 baseheater
- Coal Size/Type: blaschek nut
I have used a WM 400 for a number of years and can't say much bad about them. They pour out heat. I use a lot of stove coal in mine and when the temps get warm outside I use pea coal on top to slow the burn way down. If you're using anthracite, don't worry about the flues in the corners. I just let mine fill up so I just get bottom air. You can easily get 2 day burns in mild weather and the bi-metallic draft works great. Use a manual damper. Only thing I don't like is the rotating grate is slow and a pain as you need to poke from the top. Mike
- Dremel
- Member
- Posts: 43
- Joined: Sat. Jan. 28, 2017 2:18 am
- Location: Hudson Valley NY
- Stoker Coal Boiler: William Myers
- Hand Fed Coal Stove: warm morning 400
Thanks Coalturkey.coalturkey wrote: You can easily get 2 day burns in mild weather and the bi-metallic draft works great. Use a manual damper. Only thing I don't like is the rotating grate is slow and a pain as you need to poke from the top. Mike
Lots of good information in your reply. I found a thread about adjusting the bimetal draft control but I still don't have it quite right. Is there another spring assist in the draft door hinge itself? It seems like the bimetal spring doesn't have the hurumph-umph to push open the draft door. Instead of opening the draft door the bimetal spring just bends and/or the "rod" that goes to the door bends. Either that or the draft control knob pushes itself up. Any sage advice on that ?
Manual damper installed...
As far as output, yeah it does pour out the heat !
Thanks,
Bill