I'm looking to size up a ups / back up power supply for my stove. Need to figure out the amp draw from all the electrics. Does anyone know what it is? Has anyone retrofitted a ups onto their stove yet? Searched the forums but didn't come up with anything. I'm sure this has been done by someone somewhere.
Steve
UPS for Pocono BV
- Cold_Mainer
- Member
- Posts: 143
- Joined: Sat. Jun. 28, 2008 2:32 pm
- Location: Central Maine
- Hot Air Coal Stoker Furnace: Pocono BV 90,000 BTU
- Coal Size/Type: Rice
- Cold_Mainer
- Member
- Posts: 143
- Joined: Sat. Jun. 28, 2008 2:32 pm
- Location: Central Maine
- Hot Air Coal Stoker Furnace: Pocono BV 90,000 BTU
- Coal Size/Type: Rice
Thank you.
Shame on me for not checking the web site. Guess I'll check to see what the coal trol system draws on thier web site.
Shame on me for not checking the web site. Guess I'll check to see what the coal trol system draws on thier web site.
- WNY
- Member
- Posts: 6307
- Joined: Mon. Nov. 14, 2005 8:40 am
- Location: Cuba, NY
- Hot Air Coal Stoker Stove: Keystoker 90K, Leisure Line Hyfire I
- Coal Size/Type: Rice
- Contact:
Do a search on here for Back UP Power Supply, many of us have different setups, either UPS, Inverters, generators, etc....
Make sure you get a decent one with a Modified or FULL SINE wave output, if you get the cheap UPS, it may have a square wave output and could damage your motors/blowers, it will definitely make them hummm pretty loud too.
More info on inverters/batteries.
Inverter for Homemade Battery Backup
Make sure you get a decent one with a Modified or FULL SINE wave output, if you get the cheap UPS, it may have a square wave output and could damage your motors/blowers, it will definitely make them hummm pretty loud too.
More info on inverters/batteries.
Inverter for Homemade Battery Backup