Setting up the Coal-Trol TS2 Thermostat

This forum is for common products and questions such as chimney installations, CO detectors, coal bin designs and a variety of other general topics that do not fit into the other forums.
Post Reply
New Member
Posts: 7
Joined: Thu. Oct. 30, 2008 7:48 am
Stove/Furnace Make: Leisure Line/Hyfire II

Post Thu. Oct. 30, 2008 8:22 am

I own a Leisure line Hyfire II. I have a [email protected] Thermostat hooked up to it. I need help making sure I have all the setting set properly and what all the diffrent fuctions are. For example, What does the CFT control?

User avatar
Posts: 5849
Joined: Mon. Nov. 14, 2005 8:40 am
Hot Air Coal Stoker Stove: Keystoker 90K, Leisure Line Hyfire I
Coal Size/Type: Rice
Stove/Furnace Make: Keystoker, LL & CoalTrol
Stove/Furnace Model: 90K, Hyfire I, VF3000 Soon
Location: Cuba, NY

Post Thu. Oct. 30, 2008 9:10 am

Read this thread.
Coal-Trol V3 Firmware Features

Most of it should be Default, you shouldn't have to mess with too many of the functions, It is setup pretty good from the factory.

I only had to bump Max up to 46 to get to maximize the burn rate, but that is all I mess with, other than the Convection Fan control, I turn on to circulate the air when it's on idle.
- Dave
Hyfire I & Keystoker 90K heating an 1890 Victorian
- Amsoil Authorized T1 Certified Dealer

Post Reply

Return to “Coal Bins, Chimneys, CO Detectors & Thermostats”