Finally Getting Set up to Make My Own Hot Water

Post Reply
 
mikethebutcher
Member
Posts: 20
Joined: Thu. Dec. 13, 2007 9:07 am
Location: east stroudsburg,PA
Stoker Coal Boiler: alaska
Coal Size/Type: rice
Other Heating: propane

Post by mikethebutcher » Thu. Oct. 23, 2008 9:21 pm

Hello everyone
i finally got a chance to work on a project I was planning for all summer
i am about 3/4 of the way to finish plumbing to make my own hot water from my coal stove
i have the cold water all hooked up
i need to get more 3/4" copper to tie into my electric hot water heater....looking forward to the day I can shut it off for the winter and just use the coal stove to make my own hot water
i am going to install a hicoil 24s into this stove
here are some pictures to show the work in progress
thank you so much for this forum I have learned a lot
mike s.

Attachments

001.JPG
.JPG | 743.5KB | 001.JPG
002.JPG
.JPG | 730.5KB | 002.JPG
003.JPG
.JPG | 748.8KB | 003.JPG
004.JPG
.JPG | 742.7KB | 004.JPG
005.JPG
.JPG | 791.5KB | 005.JPG

 
steveyrock
Member
Posts: 192
Joined: Thu. Jul. 17, 2008 11:30 am
Location: eastern pa

Post by steveyrock » Thu. Oct. 23, 2008 9:31 pm

Looks like a nice set up,good deal.


 
mikethebutcher
Member
Posts: 20
Joined: Thu. Dec. 13, 2007 9:07 am
Location: east stroudsburg,PA
Stoker Coal Boiler: alaska
Coal Size/Type: rice
Other Heating: propane

Post by mikethebutcher » Sat. Oct. 25, 2008 8:23 pm

picked up some more 3/4" copper today
i will not be able to work on it until thurs.
stove ideling nice....good burn I still feel I need to adjust this stove before it gets really,really cold :)

Post Reply

Return to “Coal Bins, Chimneys, CO Detectors & Thermostats”