Want to build a mason chimney
-
- New Member
- Posts: 2
- Joined: Sat. Jan. 16, 2021 6:01 pm
Good luck, it is very hard to introduce a chimney in a already buit house
-
- Member
- Posts: 1137
- Joined: Fri. Feb. 12, 2016 2:36 pm
- Hand Fed Coal Boiler: Harman SF360
- Hand Fed Coal Stove: T.O.M (Warm Morning converted to baseburner by Steve) Round Oak 1917 Door model O-3, Warm Morning 400, Warm Morning 524, Warm Morning 414,Florence No.77, Warm Morning 523-b
- Hand Fed Coal Furnace: Clayton 7.1/DS Machine basement stove/ Harman SF1500
- Baseburners & Antiques: Renown Parlor stove 87B
- Coal Size/Type: Bituminous/anthracite
- Other Heating: Harman Accentra, enviro omega, Vermont Ironworks Elm stove, Quadrafire Mt Vernon, Logwood stove, Sotz barrel stove,
Nice. Wish my chimney had two flues.
-
- New Member
- Posts: 2
- Joined: Sat. Jan. 16, 2021 6:01 pm
This is great. I can give you some advice. If you want to learn how to build a chimney, there are several things you need to take into consideration before getting started. Building a masonry chimney doesn’t require a professional, which can save you a lot of money, but knowing how a chimney works and the importance of building it correctly, can save you from experiencing a dangerous and potentially deadly house fire. Before building any chimney you should check your local building code requirements to make sure you adhere to your local rules and regulations. And don't forget to use a .
____________
https://www.lakeside-hire.co.uk/scaffold/alloy-st ... old-tower/
____________
https://www.lakeside-hire.co.uk/scaffold/alloy-st ... old-tower/
-
- Member
- Posts: 1493
- Joined: Mon. Dec. 16, 2013 1:48 pm
- Location: somewhere high in the catskill mountains
- Hand Fed Coal Boiler: harman sf 160
- Coal Size/Type: Nut
- Other Heating: wood parlor stove
No mason in his right mind would use a scaffold this narrow for a chimney. Stability sucks over one frame high & is just too dangerous; especially loaded with masonry. It's just a European form of Baker scaffold primarily used on house interiors. Standard approved scaffold here in USA is 5 ft wide not 3. Suggest you peddle your UE/BS to unknowing neophytes elsewhere.rakootageen wrote: ↑Sun. Jan. 17, 2021 6:52 amThis is great. I can give you some advice. If you want to learn how to build a chimney, there are several things you need to take into consideration before getting started. Building a masonry chimney doesn’t require a professional, which can save you a lot of money, but knowing how a chimney works and the importance of building it correctly, can save you from experiencing a dangerous and potentially deadly house fire. Before building any chimney you should check your local building code requirements to make sure you adhere to your local rules and regulations. And don't forget to use a .
____________
https://www.lakeside-hire.co.uk/scaffold/alloy-st ... old-tower/
Jim