Coalvac Progress!

Post Reply
 
Kungur
Member
Posts: 722
Joined: Thu. Sep. 25, 2008 7:09 am
Location: Chardon,Ohio

Post by Kungur » Wed. Oct. 17, 2018 2:38 pm

I have the "over hopper" bin pretty much completed. It is currently in my basement but here are some pics of it in my shop.
P_20181016_105741_1_p.jpg
.JPG | 215.1KB | P_20181016_105741_1_p.jpg
P_20181016_105737_1_p.jpg
.JPG | 218.9KB | P_20181016_105737_1_p.jpg

 
Qtown1835
Member
Posts: 705
Joined: Sat. Nov. 08, 2014 11:47 am
Location: Quakertown, PA
Stoker Coal Boiler: Keystoker '81 KA4 (online 1/16/17)
Coal Size/Type: WAS Lehigh Rice (TBD)
Other Heating: EFM SPK600

Post by Qtown1835 » Wed. Oct. 17, 2018 3:27 pm

Looking good. How are you planning on having the coal enter?


 
Kungur
Member
Posts: 722
Joined: Thu. Sep. 25, 2008 7:09 am
Location: Chardon,Ohio

Post by Kungur » Wed. Oct. 17, 2018 5:08 pm

Stay tuned!!!

 
Kungur
Member
Posts: 722
Joined: Thu. Sep. 25, 2008 7:09 am
Location: Chardon,Ohio

Post by Kungur » Sat. Oct. 20, 2018 3:50 pm

P_20181020_151100_1_p.jpg
.JPG | 263.4KB | P_20181020_151100_1_p.jpg
P_20181020_151050_1_p.jpg
.JPG | 244.8KB | P_20181020_151050_1_p.jpg
P_20181020_151033_1_p.jpg
.JPG | 269.8KB | P_20181020_151033_1_p.jpg
So here a few more pics of the "system". As you can see I have a section of vac hose I am using to suck up the coal. I could use some advice on the Pick up End and the "by pass" ? Tube.
Thanks

Post Reply

Return to “Coal Bins, Chimneys, CO Detectors & Thermostats”