Chimney Clean Out Door Needed
- freetown fred
- Member
- Posts: 30300
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Location: Freetown,NY 13803
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
GOOGLE it S--lots to chose from. piece of tin & duct tape will do temp!!!!!!!!!!!!!!! LOL
- Rob R.
- Site Moderator
- Posts: 18004
- Joined: Fri. Dec. 28, 2007 4:26 pm
- Location: Chazy, NY
- Stoker Coal Boiler: EFM 520
- Hand Fed Coal Stove: Chubby Jr
You need to measure the size of the opening inside the door. 10x10 would be an uncommon size for a clean out. I am thinking you have an 8x8 clean out door, which would measure about 10x10" OD.
Your local masonry supply house should have some in stock. If you want to order online, lots of options there as well.
- freetown fred
- Member
- Posts: 30300
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Location: Freetown,NY 13803
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
Plenty of 10X10's advertised--that's what's on my back block chimney. Make sure on your measurements.
-
- Member
- Posts: 533
- Joined: Fri. Jan. 25, 2008 11:55 pm
- Hand Fed Coal Stove: Harman SF250 & Mark III backup
- Other Heating: Oil Hot Water
I had what seemed a unusual size and bought a few extra from Temple Foundry in Temple, PA. That's just outside Reading, PA. I think they wholesale only unless you go to the factory but they should be able to recommend where to find their product.