Chimney Clean Out Door Needed

Post Reply
 
User avatar
Snotzalot
Member
Posts: 196
Joined: Fri. Nov. 21, 2014 10:27 pm
Location: Some where over the Rainbow, Pa.
Hand Fed Coal Stove: Old Mill
Coal Size/Type: Nut/Reading
Other Heating: Elec

Post by Snotzalot » Fri. Sep. 21, 2018 4:03 pm

Looking for source for chimney clean out doors. I need one with an exterior frame size of 10X10.

 
User avatar
freetown fred
Member
Posts: 26106
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Fri. Sep. 21, 2018 4:04 pm

GOOGLE it S--lots to chose from. :) piece of tin & duct tape will do temp!!!!!!!!!!!!!!! LOL

 
User avatar
Rob R.
Site Moderator
Posts: 14541
Joined: Fri. Dec. 28, 2007 4:26 pm
Location: Chazy, NY
Stoker Coal Boiler: EFM DF520
Hand Fed Coal Stove: Hitzer 50-93
Coal Size/Type: Lehigh Rice
Other Heating: Dad's 1953 EFM Highboy

Post by Rob R. » Fri. Sep. 21, 2018 4:56 pm

Snotzalot wrote:
Fri. Sep. 21, 2018 4:03 pm
Looking for source for chimney clean out doors. I need one with an exterior frame size of 10X10.
You need to measure the size of the opening inside the door. 10x10 would be an uncommon size for a clean out. I am thinking you have an 8x8 clean out door, which would measure about 10x10" OD.

Your local masonry supply house should have some in stock. If you want to order online, lots of options there as well.

Visit DS Stoves

 
User avatar
Snotzalot
Member
Posts: 196
Joined: Fri. Nov. 21, 2014 10:27 pm
Location: Some where over the Rainbow, Pa.
Hand Fed Coal Stove: Old Mill
Coal Size/Type: Nut/Reading
Other Heating: Elec

Post by Snotzalot » Fri. Sep. 21, 2018 5:04 pm

Thanks Rob!

 
User avatar
freetown fred
Member
Posts: 26106
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Fri. Sep. 21, 2018 6:16 pm

Plenty of 10X10's advertised--that's what's on my back block chimney. Make sure on your measurements.

 
snuffy
Member
Posts: 432
Joined: Fri. Jan. 25, 2008 11:55 pm
Hand Fed Coal Stove: Harman SF250 & Mark III backup
Other Heating: Oil Hot Water

Post by snuffy » Fri. Sep. 21, 2018 7:29 pm

I had what seemed a unusual size and bought a few extra from Temple Foundry in Temple, PA. That's just outside Reading, PA. I think they wholesale only unless you go to the factory but they should be able to recommend where to find their product.

Post Reply

Return to “Coal Bins, Chimneys, CO Detectors & Thermostats”