Manometer readings too low???

 
titleist1
Member
Posts: 5226
Joined: Wed. Nov. 14, 2007 4:06 pm

Post by titleist1 » Wed. Mar. 14, 2018 8:35 am

rookiecoalburner2 wrote:
Tue. Mar. 13, 2018 8:53 pm
Titleist1,thats exactly what ive done.restictor plate is abot 1/2 open..used port with allen head bolt to take firebox draw..
:yes: You should keep an eye on the draft as temps warm up. When it gets into the 50's and 60's I will cover the baro with foil to make sure the draft stays above .02. Each install is different so you may not need to do anything.


Post Reply

Return to “Coal Bins, Chimneys, CO Detectors & Thermostats”