Page 1 of 1
Oval to 6" adapter for chimney
Posted: Mon. Feb. 12, 2018 8:10 pm
by Butchy65
I'm looking for an adapter to go from this to 6" flue pipe. Any suggestions? Thx
Re: Oval to 6" adapter for chimney
Posted: Mon. Feb. 12, 2018 9:47 pm
by McGiever
Take a piece of string and wrap around oval to get measurement and then wrap that around 5" round...if the same measurement it will fit w/ some reshaping.
Re: Oval to 6" adapter for chimney
Posted: Mon. Feb. 12, 2018 10:18 pm
by coaledsweat
5" is what it appears to be, no? Then an adapter to 6" if needed.
Re: Oval to 6" adapter for chimney
Posted: Tue. Feb. 13, 2018 3:26 pm
by BigBarney
Does anyone know why they used the oval on the stove pipe in the
first place ? Seems a lot simpler to use a standard round size and be
able to use a standard ell or t to connect a chimney.
BigBarney
Re: Oval to 6" adapter for chimney
Posted: Tue. Feb. 13, 2018 5:24 pm
by coaledsweat
Probably makes for a larger top surface.
Re: Oval to 6" adapter for chimney
Posted: Tue. Feb. 13, 2018 7:50 pm
by Den034071
Butch I have a 617 Warm Morning stove .Ace hardware had the Oval Adapter for me 19 bucks .Go there jack