Oval to 6" adapter for chimney

Post Reply
Butchy65
New Member
Posts: 4
Joined: Fri. Dec. 29, 2017 4:30 am
Hand Fed Coal Stove: Warm Morning 414 and Sears Hand Fed
Location: Pittsburgh Pa

Post By: Butchy65 » Mon. Feb. 12, 2018 8:10 pm

I'm looking for an adapter to go from this to 6" flue pipe. Any suggestions? Thx
Attachments
image.jpeg
image.jpeg

User avatar
McGiever
Member
Posts: 6820
Joined: Sun. May. 02, 2010 11:26 pm
Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
Hand Fed Coal Boiler: BUCKET A DAY water heater
Hot Air Coal Stoker Furnace: Converted Riteway into a Stoker Fed
Hot Air Coal Stoker Stove: Harman Magnum
Hand Fed Coal Stove: Warm Morning 414A
Baseburners & Antiques: Our Glenwood 111 ; Art Garland 130 ; Favorite 513
Coal Size/Type: RICE,PEA,NUT,STOVE /ANTHRACITE and EGG / BIT
Other Heating: Ground Source Heat Pump and some Solar
Location: Junction of PA-OH-WV

Post By: McGiever » Mon. Feb. 12, 2018 9:47 pm

Take a piece of string and wrap around oval to get measurement and then wrap that around 5" round...if the same measurement it will fit w/ some reshaping.
Last edited by McGiever on Tue. Feb. 13, 2018 8:49 am, edited 1 time in total.

User avatar
coaledsweat
Site Moderator
Posts: 10749
Joined: Fri. Oct. 27, 2006 2:05 pm
Stoker Coal Boiler: Axeman Anderson 260M
Coal Size/Type: Pea
Location: Guilford, Connecticut

Post By: coaledsweat » Mon. Feb. 12, 2018 10:18 pm

5" is what it appears to be, no? Then an adapter to 6" if needed.


User avatar
BigBarney
Member
Posts: 725
Joined: Wed. Feb. 08, 2006 2:48 pm

Post By: BigBarney » Tue. Feb. 13, 2018 3:26 pm

Does anyone know why they used the oval on the stove pipe in the

first place ? Seems a lot simpler to use a standard round size and be

able to use a standard ell or t to connect a chimney.


BigBarney

User avatar
coaledsweat
Site Moderator
Posts: 10749
Joined: Fri. Oct. 27, 2006 2:05 pm
Stoker Coal Boiler: Axeman Anderson 260M
Coal Size/Type: Pea
Location: Guilford, Connecticut

Post By: coaledsweat » Tue. Feb. 13, 2018 5:24 pm

Probably makes for a larger top surface.

Den034071
Member
Posts: 567
Joined: Sat. Jun. 25, 2011 4:30 pm
Hand Fed Coal Stove: Hitzer, 3095

Post By: Den034071 » Tue. Feb. 13, 2018 7:50 pm

Butch I have a 617 Warm Morning stove .Ace hardware had the Oval Adapter for me 19 bucks .Go there jack

Post Reply

Return to “Coal Bins, Chimneys, CO Detectors & Thermostats”