New chimney install

Post Reply
 
User avatar
firewoodman
Member
Posts: 152
Joined: Sat. Dec. 19, 2009 9:10 pm
Location: Carbondale, Pa.

Post by firewoodman » Mon. Oct. 30, 2017 10:38 pm

Im installing a wcb-24-1 at my new place and after getting crazy estimates on a chimney I decided to do it myself! 16x16 block with 8x8 square flue..all sealed up with refractory mortar(very expensive!) Just have to parge the outside and paint to match rest of the house. Then onto phase 2..plumb in the boiler into the existing heating system
20171028_162624.jpg
.JPG | 341KB | 20171028_162624.jpg

 
User avatar
lsayre
Member
Posts: 21781
Joined: Wed. Nov. 23, 2005 9:17 pm
Location: Ohio
Stoker Coal Boiler: AHS S130 Coal Gun
Coal Size/Type: Lehigh Anthracite Pea
Other Heating: Resistance Boiler (13.5 KW), ComfortMax 75

Post by lsayre » Tue. Oct. 31, 2017 4:58 am

Nice work!!!

 
User avatar
Freddy
Member
Posts: 7293
Joined: Fri. Apr. 11, 2008 2:54 pm
Location: Orrington, Maine
Stoker Coal Boiler: Axeman Anderson 130 (pea)
Coal Size/Type: Pea size, Superior, deep mined

Post by Freddy » Tue. Oct. 31, 2017 5:26 am

Plenty tall. Nice job!


 
User avatar
firewoodman
Member
Posts: 152
Joined: Sat. Dec. 19, 2009 9:10 pm
Location: Carbondale, Pa.

Post by firewoodman » Wed. Nov. 01, 2017 6:08 am

Thanks guys...those block were crazy heavy at the top ....all cement...no panzy lightweight stuff here!

 
User avatar
davidmcbeth3
Member
Posts: 8505
Joined: Sun. Jun. 14, 2009 2:31 pm
Coal Size/Type: nut/pea/anthra

Post by davidmcbeth3 » Wed. Nov. 01, 2017 7:02 am

firewoodman wrote:
Wed. Nov. 01, 2017 6:08 am
Thanks guys...those block were crazy heavy at the top ....all cement...no panzy lightweight stuff here!
Your wife seemed up to the task !

Post Reply

Return to “Coal Bins, Chimneys, CO Detectors & Thermostats”