Help identify maker of this?

Post Reply
 
User avatar
wilder11354
Member
Posts: 1221
Joined: Sat. Jan. 29, 2011 10:48 pm
Location: Montrose, Pa.
Hand Fed Coal Boiler: Harman SF260 Boiler
Hand Fed Coal Stove: Hitzer 50-93
Coal Size/Type: nut or pea, anthracite
Other Heating: crown oil boiler, backup.if needed

Post by wilder11354 » Sun. Oct. 01, 2017 3:55 pm

there's a thru ceiling double wall stove pipe in other section of house..its in real good shape...i just can't figure what brand?? Anyone that works with this stuff a lot, please help
IMG_20171001_154150.jpg
.JPG | 322.3KB | IMG_20171001_154150.jpg
IMG_20171001_154233.jpg
.JPG | 319KB | IMG_20171001_154233.jpg
IMG_20171001_154309.jpg
.JPG | 362KB | IMG_20171001_154309.jpg
IMG_20171001_154314.jpg
.JPG | 343.2KB | IMG_20171001_154314.jpg

 
User avatar
coaledsweat
Site Moderator
Posts: 13763
Joined: Fri. Oct. 27, 2006 2:05 pm
Location: Guilford, Connecticut
Stoker Coal Boiler: Axeman Anderson 260M
Coal Size/Type: Pea

Post by coaledsweat » Sun. Oct. 01, 2017 5:12 pm

Selkirk?

 
franco b
Site Moderator
Posts: 11416
Joined: Wed. Nov. 05, 2008 5:11 pm
Location: Kent CT
Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
Baseburners & Antiques: Glenwood Modern Oak 114
Coal Size/Type: nut and pea

Post by franco b » Sun. Oct. 01, 2017 6:09 pm

I thought Selkirk Metalbestos as well. You will need the transition piece to connect smoke pipe or if you have a crimping tool you can crimp the smoke pipe to fit inside the inner pipe of the ceiling support.


 
User avatar
wilder11354
Member
Posts: 1221
Joined: Sat. Jan. 29, 2011 10:48 pm
Location: Montrose, Pa.
Hand Fed Coal Boiler: Harman SF260 Boiler
Hand Fed Coal Stove: Hitzer 50-93
Coal Size/Type: nut or pea, anthracite
Other Heating: crown oil boiler, backup.if needed

Post by wilder11354 » Sun. Oct. 01, 2017 8:11 pm

franco b wrote:
Sun. Oct. 01, 2017 6:09 pm
I thought Selkirk Metalbestos as well. You will need the transition piece to connect smoke pipe or if you have a crimping tool you can crimp the smoke pipe to fit inside the inner pipe of the ceiling support.
I Have selkirk metalbestos on coal boiler. its all twist to lock and small band to positive lock. This looks like individual spring tabs circumference on outer pipe, not the outer outer, but inner outer insulated wall of flue pipe. look again 3 layers; outer i assume airspace, next one in outer insulated pipe, inner actual flue.

 
franco b
Site Moderator
Posts: 11416
Joined: Wed. Nov. 05, 2008 5:11 pm
Location: Kent CT
Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
Baseburners & Antiques: Glenwood Modern Oak 114
Coal Size/Type: nut and pea

Post by franco b » Sun. Oct. 01, 2017 8:19 pm

Just install smoke pipe from stove into the inner flue or pipe. You may need to crimp it smaller.

I do see the springs, so can't tell the make.

 
User avatar
coaledsweat
Site Moderator
Posts: 13763
Joined: Fri. Oct. 27, 2006 2:05 pm
Location: Guilford, Connecticut
Stoker Coal Boiler: Axeman Anderson 260M
Coal Size/Type: Pea

Post by coaledsweat » Sun. Oct. 01, 2017 8:42 pm

May be Duravent?

Post Reply

Return to “Coal Bins, Chimneys, CO Detectors & Thermostats”