Just fill those 2 buckets with coal ash,it will smother the fire just fine .gbru316 wrote:One thing I will be doing before I fire it back up next year is filling a bucket or two with sand, just in case I ever need to shut it down quickly.
Puffback Blew Pipe Off of Chimney and Stove
- windyhill4.2
- Member
- Posts: 6072
- Joined: Fri. Nov. 22, 2013 2:17 pm
- Location: Jonestown,Pa.17038
- Stoker Coal Boiler: 1960 EFM520 installed in truck box
- Hand Fed Coal Stove: Crane 404 with variable blower
- Coal Size/Type: 404-nut, 520 rice ,anthracite for both
- coaledsweat
- Site Moderator
- Posts: 13767
- Joined: Fri. Oct. 27, 2006 2:05 pm
- Location: Guilford, Connecticut
- Stoker Coal Boiler: Axeman Anderson 260M
- Coal Size/Type: Pea
Stick with the sand, heaving a bucket of ash can't end well.
- McGiever
- Member
- Posts: 10130
- Joined: Sun. May. 02, 2010 11:26 pm
- Location: Junction of PA-OH-WV
- Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
- Hand Fed Coal Boiler: BUCKET A DAY water heater
- Hand Fed Coal Stove: Warm Morning 414A
- Coal Size/Type: PEA,NUT,STOVE /ANTHRACITE
- Other Heating: Ground Source Heat Pump and some Solar
For convenient sand purchase look to big blue or big orange box stores, they carry 40 lb. bags of 'Play Sand' for kids sandbox ect..
-
- Member
- Posts: 400
- Joined: Sat. Jan. 24, 2015 11:22 pm
- Hand Fed Coal Stove: Vigilant II 2310
- Other Heating: natural gas central forced air
Yes, their manual is online. It even talks about puff backs.
http://downloads.hearthnhome.com/installManuals/M ... II_III.pdf
http://downloads.hearthnhome.com/installManuals/M ... II_III.pdf
gbru316 wrote: ↑Tue. Mar. 14, 2017 12:53 pmlol that's what my thought was, but since this is only my second season with stoves in general, I wasn't sure if there were acceptable deviations.
They're sending someone out first thing tomorrow morning to fix everything and they're going to talk to their insurance company about the carpet. I plan on staying home from work to "supervise" given that they dropped the ball so spectacularly the first time around.
Is there a guide that shows/explains exactly how the stove should be connected to the chimney? Attachment points, types of fasteners, etc? I'd prefer to know exactly what needs done tomorrow to make everything safe so it's not the blind leading the blind.
-
- Member
- Posts: 32
- Joined: Mon. Jan. 21, 2019 10:44 pm
- Hand Fed Coal Stove: Harmaan MK I
- Coal Size/Type: anthracite nut
- Other Heating: oil
i use ultra copper hi temp adhesive-silicone sealer where my stove pipe enters the "crock" it has to be cut out for yearly cleaning. good stuff where you can't screw.
- oliver power
- Member
- Posts: 2970
- Joined: Sun. Apr. 16, 2006 9:28 am
- Location: Near Dansville, NY
- Stoker Coal Boiler: KEYSTOKER Kaa-2
- Hand Fed Coal Stove: Hitzer 50-93 & 30-95, Vigilant (pre-2310), D.S. 1600 Circulator, Hitzer 254
That's more like an explosion, than a puff back. We've been using the term "Puff Back" loosely in the coal burning. We've been calling light explosions, Puff Backs. In my opinion, when burning wood, sometimes we'd get a down draft, which would let a puff of smoke into the room. That's what we always called a puff back. Not an explosion, but a puff back. Many "X" wood burners on here. Do you all agree?
- freetown fred
- Member
- Posts: 30300
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Location: Freetown,NY 13803
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
Loosely indeed Scott!!!!!!!!!!!!!!!!!!!!!!! LOL