Coal Bin Pictures and Designs

 
User avatar
k9 Bara
Member
Posts: 499
Joined: Mon. Mar. 31, 2008 11:27 am
Location: Red Creek, Fair Haven area NY
Stoker Coal Boiler: 1996 EFM 520 DF
Coal Size/Type: Buck / Reading

Post by k9 Bara » Sat. Oct. 09, 2010 8:19 pm

Very nice. That is what I will be looking to do for sure. Once I get the EFM going, Ill build and outside bin. Great Job. :D


 
User avatar
Short Bus
Member
Posts: 510
Joined: Sun. Jan. 10, 2010 12:22 am
Location: Cantwell Alaska
Stoker Coal Boiler: Kewanee boiler with Anchor stoker
Coal Size/Type: Chestnut / Sub-bituminous C
Other Heating: Propane wall furnace back up only

Post by Short Bus » Sat. Oct. 09, 2010 10:35 pm

Thanks for showing us that George, I've wondered about those flexable augers for awhile.

 
User avatar
k9 Bara
Member
Posts: 499
Joined: Mon. Mar. 31, 2008 11:27 am
Location: Red Creek, Fair Haven area NY
Stoker Coal Boiler: 1996 EFM 520 DF
Coal Size/Type: Buck / Reading

Post by k9 Bara » Sat. Oct. 09, 2010 10:54 pm

reckebecca wrote:My coal bin - window in side wall is for the loading conveyor.

~Rebecca
I wish I had those kind of skills, Great job. :D

 
User avatar
rockwood
Member
Posts: 1381
Joined: Sun. Sep. 21, 2008 7:37 pm
Location: Utah
Hot Air Coal Stoker Furnace: Stokermatic
Hand Fed Coal Stove: Rockwood Stoveworks Circulator
Baseburners & Antiques: Malleable/Monarch Range
Coal Size/Type: Lump and stoker + Blaschak-stove size

Post by rockwood » Sun. Oct. 10, 2010 12:16 am

reckebecca wrote:My coal bin - window in side wall is for the loading conveyor.

~Rebecca
Looks good to me and would easy to move if necessary (empty of course) ;) I like movable outdoor coal bins....Just as soon as you build a permanent one with concrete etc. something comes up and you need to move it.

 
GeorgiePorgie
Member
Posts: 167
Joined: Tue. Dec. 09, 2008 8:44 pm

Post by GeorgiePorgie » Sun. Oct. 10, 2010 7:52 pm

Just a minor correction:

It took me a while to figure out the volume of the cooler I was using, as it turned out, it's a Coleman 100 QTS Cooler, and according to the test of moving coal horizontally, it took 8 minutes, I guess that's much more than 12 Gallons as I thought earlier

 
reckebecca
Member
Posts: 101
Joined: Thu. Aug. 28, 2008 4:03 pm

Post by reckebecca » Tue. Oct. 12, 2010 10:03 pm

lowfog01 wrote:
reckebecca wrote:My coal bin - window in side wall is for the loading conveyor.

~Rebecca
Wow, I'm jealous! I'm stuck with bags until we can escape from suburbia. Lisa
Thanks Lisa - it is nice having it easily accessible.

~Rebecca

 
reckebecca
Member
Posts: 101
Joined: Thu. Aug. 28, 2008 4:03 pm

Post by reckebecca » Tue. Oct. 12, 2010 10:05 pm

k9 Bara wrote:
reckebecca wrote:My coal bin - window in side wall is for the loading conveyor.

~Rebecca
I wish I had those kind of skills, Great job. :D
I actually can't take the credit - my mother designed and built it! She also built the garage that it sits beside. :)

~Rebecca


 
reckebecca
Member
Posts: 101
Joined: Thu. Aug. 28, 2008 4:03 pm

Post by reckebecca » Tue. Oct. 12, 2010 10:06 pm

rockwood wrote:
reckebecca wrote:My coal bin - window in side wall is for the loading conveyor.

~Rebecca
Looks good to me and would easy to move if necessary (empty of course) ;) I like movable outdoor coal bins....Just as soon as you build a permanent one with concrete etc. something comes up and you need to move it.
Thanks! Yes, could be moved if need be - it sits up on pressure treated boards.

~Rebecca

 
User avatar
poconoman
Member
Posts: 127
Joined: Tue. Oct. 27, 2009 5:42 pm
Location: Pocono Lake, PA

Post by poconoman » Fri. Oct. 15, 2010 8:26 am

YZF1R wrote:Well, I did get two ton of coal in my bin with a couple inch's to spare. Here is a before and after pic. One problem though. When filling it the inside walls got all black. (LOL) I painted Dryloc inside and my wife is going to white wash the outside.

Steve
:?: Why would it bother you that the bin "got all black"? It's COAL. No matter what you do, it will always have dust. Do you really expect the bin to be 'clean' by applying Dryloc? :roll:

 
YZF1R
Member
Posts: 67
Joined: Mon. Jun. 28, 2010 7:59 pm
Location: Lancaster, PA

Post by YZF1R » Sat. Oct. 16, 2010 10:09 am

poconoman wrote:
YZF1R wrote:Well, I did get two ton of coal in my bin with a couple inch's to spare. Here is a before and after pic. One problem though. When filling it the inside walls got all black. (LOL) I painted Dryloc inside and my wife is going to white wash the outside.

Steve
:?: Why would it bother you that the bin "got all black"? It's COAL. No matter what you do, it will always have dust. Do you really expect the bin to be 'clean' by applying Dryloc? :roll:
No, you see the "Lots Of Laughs” after that comment? I was just being sarcastic. I'm sorry, didn't mean anything. I really don't come off that well in print. Never was very good at e-mail and such. Anyway, the two coats of Dryloc are to hopefully help with guarding the wood from moisture. An idea I got from someone on the forums here.

Steve

 
Dannmarr
Member
Posts: 34
Joined: Wed. Oct. 20, 2010 10:33 pm

Post by Dannmarr » Wed. Oct. 20, 2010 10:48 pm

I'm still waiting for my Keystoker 105 to be delivered. In the meantime, I built a 5x8 coal bin. Any suggestions on how to finish the exterior would be appreciated.

Attachments

DSCN5142.JPG

Coal bin built on a concrete slab with OSB and pressure treated lumber.

.JPG | 202.2KB | DSCN5142.JPG

 
User avatar
coalvet
Member
Posts: 254
Joined: Tue. Feb. 27, 2007 12:48 pm
Location: Rhode Island
Hand Fed Coal Stove: Crane Model 404, Harman MK I
Coal Size/Type: Nut
Other Heating: NG Boiler

Post by coalvet » Thu. Oct. 21, 2010 8:02 am

If that was my bin I would put roll roofing on the top and cedar shingles on the sides, pretty maintenance free after that. Good luck with what ever you decide.

Rich

 
User avatar
Duengeon master
Member
Posts: 1958
Joined: Sun. May. 06, 2007 7:32 am
Location: Penndel, Pa.
Hand Fed Coal Stove: Harmon Mark III
Coal Size/Type: Anthracite pea and nut mix. Bituminous lump

Post by Duengeon master » Thu. Oct. 21, 2010 8:13 am

One bundle of your favorite roofing shingle and one box of your favorite color siding will make your coal bin look nice! :D

 
jrn8265
Member
Posts: 930
Joined: Tue. Jul. 22, 2008 11:52 am
Location: Near Coal Country, PA

Post by jrn8265 » Thu. Oct. 21, 2010 9:40 am

Dry Loc on the inside!

 
User avatar
2001Sierra
Member
Posts: 2211
Joined: Wed. May. 20, 2009 8:09 am
Location: Wynantskill NY, 10 miles from Albany
Hot Air Coal Stoker Stove: Keystoker 90 Chimney vent
Coal Size/Type: Rice
Other Heating: Buderus Oil Boiler 3115-34

Post by 2001Sierra » Thu. Oct. 21, 2010 9:51 pm

Why not roof it with metal roofing? It would keep the lid lighter. Also could be sided with the same.


Post Reply

Return to “Coal Bins, Chimneys, CO Detectors & Thermostats”