Connecting Thermostat
-
- Member
- Posts: 133
- Joined: Thu. Jan. 23, 2014 10:23 am
- Location: Western Michigan
- Stoker Coal Boiler: KAA-2
- Hand Fed Coal Stove: Hitzer model 30-95 EZ Flow Sadly Retired
- Coal Size/Type: Rice
- Other Heating: Propane furnace/elec. water heater
I need to know if I am on the right track, with interconnecting my KAA-2 and furnace blower together? In the triple aquastat there are the 2 terminals for the stat. If run a single wire from 1 terminal to the blower circuit on my furnace, when the stat. calls for heat and completes the circuit it should start the blower right?
- McGiever
- Member
- Posts: 10130
- Joined: Sun. May. 02, 2010 11:26 pm
- Location: Junction of PA-OH-WV
- Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
- Hand Fed Coal Boiler: BUCKET A DAY water heater
- Hand Fed Coal Stove: Warm Morning 414A
- Coal Size/Type: PEA,NUT,STOVE /ANTHRACITE
- Other Heating: Ground Source Heat Pump and some Solar
Most of the time the furnace blower is already on a 24 volt relay, so use the coal thermostat to start and stop the blower as well.