Need: 4" Stainless Single Wall 90 Degree Elbow, DVC500

ablumny · Post by **ablumny** » Sun. Oct. 04, 2015 7:04 pm

For eight seasons I've used galvanized single wall pipe on the exhaust side of my DVc500. I usually get two seasons before they corrode. This year I switched to stainless, however I'm short one 90 degree elbow. I picked up everything else online but the source we short this piece. Other sources that manage to have one are insanly priced. Anyone have or seen one you can point me to?
--------------
UPDATE: found an elbow online. Would still like to hear from dvc500 owners on the question below though. Thx

Side question
One dealer told me I'm supposed to be using dual wall stove pipe for a dvc500 with some sort of funky exit cap on top of a 4' rise. Never heard of this, never had a problem, although the collar that passes thru the wall looks like it wants a dual wall pipe. Dvc owners?

xmanjeff · Post by **xmanjeff** » Thu. Oct. 15, 2015 5:26 pm

here you go , I just bought a bunch of items to finish my hookup
http://www.ebay.com/itm/4-Stainless-Steel-90-Eblo ... 1886484155
http://stores.ebay.com/Reliance-Mfg?_trksid=p2047675.l2563

ablumny · Post by **ablumny** » Thu. Oct. 15, 2015 9:02 pm

xmanjeff wrote:here you go , I just bought a bunch of items to finish my hookup
http://www.ebay.com/itm/4-Stainless-Steel-90-Eblo ... 1886484155
http://stores.ebay.com/Reliance-Mfg?_trksid=p2047675.l2563

Ha! That's exactly where I got my fittings! Thx

carpenterjoe · Post by **carpenterjoe** » Tue. Oct. 20, 2015 5:32 am

National Chimney supply. I used to make them there.

Need: 4" Stainless Single Wall 90 Degree Elbow, DVC500

Attachments