DHW Coil or Indirect Water Tank?
- hotblast1357
- Member
- Posts: 5661
- Joined: Mon. Mar. 10, 2014 10:06 pm
- Location: Peasleeville NY
- Stoker Coal Boiler: 1984 Eshland S260 coal gun
- Coal Size/Type: Lehigh anthracite pea
- Other Heating: air source heat pump, oil furnace
No, I will be installing either a axeman or AHS 130. Due to us having pea coal.
- hotblast1357
- Member
- Posts: 5661
- Joined: Mon. Mar. 10, 2014 10:06 pm
- Location: Peasleeville NY
- Stoker Coal Boiler: 1984 Eshland S260 coal gun
- Coal Size/Type: Lehigh anthracite pea
- Other Heating: air source heat pump, oil furnace
So can I just mount this onto a 007 catridge with bronze flanges?McGiever wrote:Okay, you would want a bronze or stainless pump body...motor and impeller can be generic...gotcha.
Proper bronze or stainless body not cracked or broken may work.
Attachments
- Rob R.
- Site Moderator
- Posts: 18004
- Joined: Fri. Dec. 28, 2007 4:26 pm
- Location: Chazy, NY
- Stoker Coal Boiler: EFM 520
- Hand Fed Coal Stove: Chubby Jr
Maybe...or not. That tankless coil is pretty restrictive. What is the worst that could happen?lsayre wrote:The 007 will be massive overkill for your use.
I have an old 007 you can experiment with.
- hotblast1357
- Member
- Posts: 5661
- Joined: Mon. Mar. 10, 2014 10:06 pm
- Location: Peasleeville NY
- Stoker Coal Boiler: 1984 Eshland S260 coal gun
- Coal Size/Type: Lehigh anthracite pea
- Other Heating: air source heat pump, oil furnace
I have 2 007's and a grundfos 3 speed 15-58 hanging around.. but I don't think I can use that body due to the measurements they supply of the bolt holes, it is way bigger than my pumps.