316Ti Double Wall Chimney System, Rigid Pipe
- lsayre
- Member
- Posts: 21781
- Joined: Wed. Nov. 23, 2005 9:17 pm
- Location: Ohio
- Stoker Coal Boiler: AHS S130 Coal Gun
- Coal Size/Type: Lehigh Anthracite Pea
- Other Heating: Resistance Boiler (13.5 KW), ComfortMax 75
Does anyone out there offer a 316Ti double wall rigid pipe chimney system? Not a liner, but a complete stand alone chimney system made with 316Ti. I've been searching and so far I've come across 304, 316, and 430 stainless double walled systems, but nothing in 316Ti.
- McGiever
- Member
- Posts: 10130
- Joined: Sun. May. 02, 2010 11:26 pm
- Location: Junction of PA-OH-WV
- Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
- Hand Fed Coal Boiler: BUCKET A DAY water heater
- Hand Fed Coal Stove: Warm Morning 414A
- Coal Size/Type: PEA,NUT,STOVE /ANTHRACITE
- Other Heating: Ground Source Heat Pump and some Solar
Not what you are asking, but the Titanium is added to the less costly 304 SS to avoid having the higher cost of having to use the 316 SS.
What about 430 SS and AL 29?
What about 430 SS and AL 29?
- Flyer5
- Member
- Posts: 10376
- Joined: Sun. Oct. 21, 2007 4:23 pm
- Location: Montrose PA
- Stoker Coal Boiler: Leisure Line WL110
- Hot Air Coal Stoker Stove: Leisure Line Pioneer
- Contact:
Olympia chimney. Made in Scranton PAlsayre wrote:Does anyone out there offer a 316Ti double wall rigid pipe chimney system? Not a liner, but a complete stand alone chimney system made with 316Ti. I've been searching and so far I've come across 304, 316, and 430 stainless double walled systems, but nothing in 316Ti.
EDIT: They only have 316L with a lifetime warranty with coal http://www.olympiachimney.com/ventis-class-a-all- ... imney-pipe