Direct Vent

This forum is for common products and questions such as chimney installations, CO detectors, coal bin designs and a variety of other general topics that do not fit into the other forums.
Post Reply
User avatar
japar
Member
Posts: 165
Joined: Tue. Oct. 16, 2007 8:52 pm
Hand Fed Coal Stove: Hearthmate
Stove/Furnace Make: Hearthmate
Stove/Furnace Model: combo
Location: Seekonk MA

Post Thu. Feb. 21, 2008 7:18 pm

I saw a direct vent Harman Stoker on ebay go for over 2K a while back. Now in my house a have a Heartmate that sits in front of my fireplace. But at my workshop I still heat with oil. I cannot cut any holes in the building so how does this direct vent work. Can you use any stove and let it vent into the heating area ?? I also think I saw a direct vent pellet stove at Home Depot is there such an animal. Looking for a way to get away from oil at my workshop.


User avatar
WNY
Member
Posts: 5849
Joined: Mon. Nov. 14, 2005 8:40 am
Hot Air Coal Stoker Stove: Keystoker 90K, Leisure Line Hyfire I
Coal Size/Type: Rice
Stove/Furnace Make: Keystoker, LL & CoalTrol
Stove/Furnace Model: 90K, Hyfire I, VF3000 Soon
Location: Cuba, NY
Contact:

Post Thu. Feb. 21, 2008 7:30 pm

ALL exhausts must go outside for ANY type of combustion stoves. (coal, pellet, etc..)

A direct vent and/or power vent, is basically that, it is a blower that pushes or sucks the exhaust gases outside, YOU still must have it vented outside, but does not require a tall chimney, just a opening on the outside with either the power vent or a Tee and Cap.

Direct vents mount on the stove and PUSH the air outside.

A power vent, mount on the side of the building and pulls the exhaust gases outside.
ie. Pwer Vent [nepathumb]3267[/nepathumb]

Do a search on here for Power Vents....
- Dave
Hyfire I & Keystoker 90K heating an 1890 Victorian
- Amsoil Authorized T1 Certified Dealer

Post Reply

Return to “Coal Bins, Chimneys, CO Detectors & Thermostats”