Power Venting Problems

This forum is for common products and questions such as chimney installations, CO detectors, coal bin designs and a variety of other general topics that do not fit into the other forums.
Post Reply
New Member
Posts: 1
Joined: Wed. Jan. 23, 2013 8:25 am
Stove/Furnace Make: Weil Mclain

Post Wed. Jan. 23, 2013 8:34 am

Hello, not sure if this is the right place to ask since I have an oil burner, but I found this site after trying to figure out my venting problem. I have a Weil Mclain oil burner with a Tjernlund HST-1 power venter. The venter is kinda working. It turns on and if the burner isnt going, it will open damper slightly. If burner is on, the damper doesnt open. What is happening is I am getting exhaust fumes into my house now. I know the damper is open on the venter. It almost seems like it doesnt have enough speed or power to turn the cage fast enough. I really do not want to spend a ton of money on this system since I am looking at replacing the whole thing further down the road. Any help would be great. Thanks

Last edited by chaosracing on Wed. Jan. 23, 2013 9:21 am, edited 1 time in total.

User avatar
Posts: 2379
Joined: Mon. Sep. 27, 2010 3:39 pm
Hand Fed Coal Boiler: Bucket a Day
Hand Fed Coal Stove: Vigilant Casting 2310
Coal Size/Type: Pea/Nut/Wood in the VC and anything that will fit in the Bucket a Day. It's not fussy.
Location: Girardville Pa.

Post Wed. Jan. 23, 2013 9:00 am

The Tjernlund power ventor you have was discontinued in July of 2002 per the manufacturers web site. More than likely your gonna have a problem getting parts. The HST-1 was replaced with the HS1. A quick check shows prices ranging from $230 on Amazon to $265 from a HVAC supply house. A tech service call and replacement parts will run you that much or more.

You said your getting a lot of fumes. It's better to spend a few bucks now rather than wake up dead later.

Rev. Larry
Rev. Larry
Ashland Pa.

1 John 1:9... If we sin and we confess that sin He is faithful and just and will forgive us and cleanse us from all unrighteousness.

User avatar
Posts: 8281
Joined: Wed. Nov. 16, 2011 9:51 am
Hand Fed Coal Furnace: Overmodified/Bored out Clayton 1537
Coal Size/Type: Anthracite/Awesome Size
Location: Olean, NY

Post Wed. Jan. 23, 2013 10:00 am

You've probably noticed by now that a change over to coal heat would make your investment back in a relatively very short period of time as compared to oil :D

Just tryin to get going in the right direction partner :lol:

Posts: 188
Joined: Fri. Sep. 02, 2011 7:19 pm
Hot Air Coal Stoker Furnace: Leisure Line Pioneer
Location: My Place

Post Wed. Jan. 23, 2013 1:43 pm

Yes, go ahead and make the switch to coal now. You will save money and have more to talk about here :D
We all want to hear that you have CO detectors in that house :?:

Oh, Welcome to the show :cheers:

I felt like I woke up dead a couple times, it's no fun.
should be a convenience store, not a government agency.

Post Reply

Return to “Coal Bins, Chimneys, CO Detectors & Thermostats”