Page 2 of 2

Re: Need Advise About Drafting Issue

Posted: Sat. Feb. 04, 2012 10:47 am
by Berlin
looks good bootstrap, but I would have vented the gas furnace with a "B" vent (cheaper) and used the nice interior masonry stack for the coal.

Re: Need Advise About Drafting Issue

Posted: Tue. Feb. 07, 2012 8:35 pm
by mprov
Thanks for all the advice.I decided to go with the power vent. I fired her up tonight for the first time in a week and so far so good.With the power vent I was able to move the stove to a different location to better heat the entire house.This time I hooked up the manometer and reading -4.I missed having her running a week seamed like a year.I will not be careless anymore with my stove.I think I will sit in my favorite chair and listen to her hum along.

Re: Need Advise About Drafting Issue

Posted: Tue. Feb. 07, 2012 9:41 pm
by coaledsweat
mprov wrote:I think I will sit in my favorite chair and listen to her hum along.
I find a chair with wheels on it makes it that much better. :)

Re: Need Advise About Drafting Issue

Posted: Wed. Feb. 08, 2012 12:53 pm
by Bootstrap
Uglysquirrel wrote:Is that a wind genny I see on your roof, Bootstrap ?

Pretty cool if it is!!! :D :D
indeed it is...
Berlin wrote:looks good bootstrap, but I would have vented the gas furnace with a "B" vent (cheaper) and used the nice interior masonry stack for the coal.
I didnt think about that at the time....If I could've done it over I would.

Re: Need Advise About Drafting Issue

Posted: Wed. Feb. 08, 2012 5:34 pm
by Uglysquirrel
Bootstrap, please tell us about your wind genny.

Re: Need Advise About Drafting Issue

Posted: Wed. Feb. 08, 2012 10:11 pm
by Bootstrap
Its a 600 watt 24 volt dc generator. Rated to produce power at 5 mph. It runs into 2 300 watt wind rated grid tie inverters by Sun. I will take some pictures and upload.